8th Generation Honda Civic Forum banner

Loose belt tensioner?

12K views 8 replies 6 participants last post by  Zbuilder  
#1 · (Edited)
I had a buzzing noise from my engine at low rpms, and at idle while in gear, so I replaced the belt according to the 06-059 TSB. it still makes the buzzing so I opened my hood and noticed the belt tensioner jiggling around a bit. Does this mean the tensioner is failing or can it be tightened? (the tensioner is hydraulic)
 
#6 · (Edited)
Well, answering my own question , I found out the diagram is wrong. From the alternator, the belt SHOULD go down the front to the A/C pully, around the back of the A/C pulley & up & around the water pump pulley then down to the crank pulley then follow the diagram.