[xslick]

So i'm upping my pulley from 3.6 to 3 inches on my blower and I am getting a snow boost kit stage one to keep it cool and as far as the kit goes is there anything else I should need to get for just stage one?

 

[ImAuthenticFTW]

So i'm upping my pulley from 3.6 to 3 inches on my blower and I am getting a snow boost kit stage one to keep it cool and as far as the kit goes is there anything else I should need to get for just stage one?

how ya planning on tuning this??

 

[xslick]

AEM FI/C i was told it could be done.

 

[xslick]

my main concern is dropping the temperature down to keep it cooler.

 

[crezykesser]

get a stage 2 boost cooler not a stage one. the stage two offers two nozzles in the kit for different ranges of horsepower. I bought mine, added the smaller nozzle and installed the kit before i did all this. Just be careful because the cooler add's another 2-3 psi to the pulley. Might want to start looking into internal work and perhaps an intercooler/aftercooler. If you want to see my setup just go to my thread