Hey Guys, i just installed the Skunk2 Megapower Cat Back exhaust for my r18 yesterday and today i noticed vibration from somewhere in the console, followed later by a rattling sound coming from the undercarriage. I'm thinking that it could be the flange with the 2 spring backed bolts cuz i was hesitant about cranking them all the way and just tightened until the springs were good and firm. If anybody could give me an idea or two that would be great :help:
vibration/raddle during idle after S2 cat back install
1 - 5 of 5 Posts
as in you cut them off?!
We are having a bit of a winter snow storm here in Alberta so once the snow passes i will give those hangers a nice tweaking. Thanks for the help guys
Joined
·
14,929 Posts
Cut them down a bit. A bunch of us have had the same problem (myself included). Cut the hangers down with an angle grinder if you have one. That's the easiest way. I assure you that you don't want to try it with a hacksaw. This should help a little as well:
http://www.8thcivic.com/forums/do-yourself-articles/31488-diy-modify-skunk2-exhaust-hangers.html
1 - 5 of 5 Posts
Join the discussion
Join now to ask and comment!