8th Generation Honda Civic Forum banner

TSX cams need help please

69771 Views 198 Replies 51 Participants Last post by  Shadow_FG2
Hi,
Im interested in purchasing a set of 2006-2008 tsx intake and exhaust cams. Im new to cams, so any help would be appreciated.

Current Modifications:
-2008 Civic Si Sedan
-stock k20 engine
-AEM CAI V2
-Skunk2 header
-Fullrace 3" exhaust
-boomba motor mounts
-flashpro

my questions are:

-are tsx cams drop and go? no other engine mods needed? (aside from flashpro of course)
-how much do these cost brand new?
-whats a reputable place/website to you buy these from?
-how much do they cost to install?
-if you have a similar setup as mine, what performance gains did you make? feel free to share any dyno results
-how will these perform with a stage 2 supercharger?
-how will these perform with a skunk2 intake manifold and throttle body?
-how do these cams effect fuel economy?

thanks for your help. :dance:
See less See more
1 - 5 of 199 Posts
TSX cams is a good start for a DD ride. Leaves it open for potential if you stay mild NA or go boost. You should outline your future plans now because going thru a few cams or valvetrains to support your desires will be costly.
kenny311 has a churchs dyno graph with rrc+j35 w/ tsx cams. search it. has a good description on the thread of his work.
do you need to enlarge your intake manifold and throttle body to see any gains with these or any cams. I have basic bolt ons but don't know if the RRC/J35 is worth the money right now
Ifs helps but its not necessary. People have ran rbc and stock TB while getting 240ish whp

Sent from my DROID RAZR using Tapatalk
I noticed that "stage one" more or less give better overall "perk" in gains than Max power output. If that makes sense.

Sent from my DROID RAZR using AutoGuide.com App
1 - 5 of 199 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top