8th Generation Honda Civic Forum banner

1 - 20 of 2057 Posts

·
Premium Member
Joined
·
10,417 Posts
Discussion Starter #1 (Edited)
Current Engine Mods

[email protected]

420/280 dyna pak
353/234 dynojet
388/272 eDyno

Flashpro
Vit tuned
e85
k20z3
dw1300 injectors
dw300 fuel pump
mucters no nonsense fuel return
comptech supercharger
ported by stiegemeier
IMT stg2 aftercooler
coated rotors
2.95" blower pulley
6.37" crank pulley
IMT inlet
custom cai
j37 tb
supertech flat faced valves
supertech 92lb springs
hasport 70a full mount kit
s2 megapower header
invidia q300
Exedy Stg1 clutch
CC 11lb flywheel
dc5r 4th gear
dc5r 5th gear
9th gen sixth gear

https://flic.kr/p/hp4DYs

https://flic.kr/p/mmG7gG

https://flic.kr/p/pXQCKf

https://flic.kr/p/hB41rG

https://flic.kr/p/hB43Bo

https://flic.kr/p/gQehrM

https://flic.kr/p/hp5P5a

https://flic.kr/p/qeMQ85

Just some reading that we came across along the way :paper:

K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum - View Single Post - Project Phoenix rising - yep, time to rebuild again.
K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum - View Single Post - Project Phoenix rising - yep, time to rebuild again.
K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum - View Single Post - The Quickening - Another rebuild story
K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum - View Single Post - Oil Cooler install on K24. Need a k20a-R JDM part number.
K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum - View Single Post - Project Phoenix rising - yep, time to rebuild again.

Videos









UPDATES

Pg. 2 - tires and j37
Pg. 3 - OEM part numbers
Pg. 4 - Crank polished
Pg. 6 - Engine Assembly
Pg. 7 - VC and 6th gear
Pg. 8 - FD2 5.06 final drive
Pg. 9 - Polished RBC
Pg. 19 - Engine install
Pg. 20 - K24 start up
Pg. 24 - eDyno graphs
Pg. 31 - New tire and wheel setup
Pg. 34 - Dyno day pics
Pg. 38 - e85
Pg. 40 - ev14 1000cc inj/dw65c fuel pump
Pg. 44 - Amsoil oil pump kit
Pg. 46 - DC5R 4th and 5th gear
Pg. 46 - 4piston ported head
Pg. 58 - CT Supercharger Installed
Pg. 60 - YouTube video
Pg. 62 - S/C eDyno and YouTube video
Pg. 64 - No non sense fuel return part list
Pg. 66 - NNFR and RDX Crank Pulley
Pg. 69 - More fuel return install pictures
Pg. 74 - Blower is back from stiegemeier
Pg. 79 - Random car pics
Pg. 86 - Replacing the dw65 fuel pump w/dw300
Pg. 90 - Dyno day vids/pics 2014
Pg. 93 - eDyno graph
 

·
Registered
Joined
·
3,000 Posts
Glad to see you kept everything for the build...good luck with the build...
I have RDX Injectors used with 15k let me know
 

·
Registered
Joined
·
3,000 Posts
I was back and forth there for a little while between finishing the build or going for a s/c :giggle:

I think in the end this will satisfy my needs. I'll keep you in mind for the injectors :thumb:
I just sold my ips k2 cams with valvetrain and trying to save up for a supercharger. Just let me know....
 

·
Premium Member
Joined
·
10,417 Posts
Discussion Starter #13
Clean ride. I need to step my game up. If you're still in San Diego, I'll be looking for you
:shadyhat:

Do you ever make it out to the monthly meets :think:

I just sold my ips k2 cams with valvetrain and trying to save up for a supercharger. Just let me know....
:word:

Once I recover from the cam purchase I will be ready to rock n roll on some more parts :waiting:
 
1 - 20 of 2057 Posts
Top