8th Generation Honda Civic Forum banner

Slunk2 Camshafts R18 is out!

27276 Views 51 Replies 16 Participants Last post by  Polaris
R18 Tuner Series Camshafts Stage 2

Gain an extra 10+ hp with Skunk2’s Tuner Series Stage II Camshaft for the Honda R18, our premier line of high-performance camshafts for Honda’s R18A1 engines. Tuner Series Stage II Camshafts are designed to optimize horsepower and torque on mildly modified engines and are the result of Skunk2’s years’ worth of drag racing and road racing efforts. No other line of high-performance camshafts even comes close to Skunk2’s Tuner Series.

Skunk2 camshafts deliver unparalleled power as a result of continual, extensive development and testing. By utilizing advanced manufacturing techniques and the latest computerized simulation and modeling equipment, Skunk2 camshafts are able to deliver maximum power across the entire powerband. Skunk2 designs and tests all of its camshafts in-house to ensure the highest quality and performance. Each camshaft is new, not regrind, and manufactured from high-strength, hollow, iron-alloy cores featuring cutting-edge profiles. All Skunk2 camshafts are ground to exact specifications using state-of-the-art CNC cam grinding machines equipped with cubic-boron grinding wheels and feature hardened, wear-resistant lobes and surfaces.

Skunk2’s Tuner Series Camshafts for R18A1-based engines feature Fast Ramp and AMAX profile technology, which increases overall performance and results in unmatched response from idle to redline. AMAX technology simply maximizes the area under the lift curve but without compromising reliability or valvetrain stability. Skunk2’s profiles feature more duration than competitors’ at lifts above 1mm, resulting in greater efficiency and more power. And thanks to Fast Ramp, the same technology used in Formula One racing, seat timing is reduced, which results in additional cylinder pressure and more torque but without compromising valvetrain longevity. The Stage II R18A1 camshafts utilize the stock VTEC economy lobe. This mean you do not sacrifice MPG while cruising, your MPG will remain the same under cruse loads. The Stage II cam also provides more lift and duration, and is a drop in cam that requires no spring or retainer upgrade. To extract the utmost power a tuning device such as Hondata would be required.

Part Number: 305-05-0075 (R18 Tuner Series Camshafts Stage 2)
Available now at Skunk2.com.
See less See more
1 - 4 of 52 Posts
I will but adding more stuff around it let's just get them purchased first :)
What else will you be doing? Any mods I should get to support this besides flashpro? I already have intake and exhaust.
so i just bought this cam yesterday i couldn't wait and i just called procivic on the phone and ordered it . now my dilemma is does anyone know if it comes with instructions on how to install it. i been reading on how to remove and install the factory cam and it seems like a really long process involving the removal of many other things, so i dont know whether i should venture doing it myself or pay a show to do it.
When I get mine im going to get a dyno before and after to see the actual difference... but it would be nice knowing before I buy... hint... hint
Why not visit a Honda only shop in a different state?? That what I did to get my evo and Z turboed was cheaper and speciality shops? The traveling could be fun

Any word on getting it dynoed after the cam?
1 - 4 of 52 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.