8th Generation Honda Civic Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
4,191 Posts
Discussion Starter #1 (Edited)
i searched on this site and couldnt find one but i got this off superhonda.com quoted from HighTechPerform

also taken from the exhaust list from this site =D

enjoy


OFFICIAL
R-SERIES PARTS GUIDE:

I thought id do the honor of making an official R18 (FG1) thread on all OEM and aftermarket parts available to our civics. Here is goes....





ENGINE/UNDER THE HOOD:

Valvecover w/Honda & iVTEC logo
Japanparts.com: TOKYO GM SHOKAI KK
*Note: You may want to purchase the x2 bolts as they need to be longer to go through the valve cover and into the cyl. head. I never purchased them because the cover has x2 plastic retainers such as the OEM has included.

turbo
SpeedLab - Turbo Kits/Components

Alloy oil filler caps
AEM (DC Sports)
*Oil Cap - Only Thread-In

Anodized blue.
Part #: 20-201B
$38.42 Buy Now...

Anodized red.
Part #: 20-201R
$38.42 Buy Now...

Anodized clear (Silver)
Part #: 20-201C
$38.42


Downpipes & mandrel bent sections

TopSpeed Header (2-piece) <[email protected] thread>
http://www.fgcoupe.com/forum/showthr...hlight=torredo


WeaponR (2-piece)
www.weapon-r.com


Megan Racing downpipe section (1-piece)
Megan Racing


Cold air intakes (CAI)
InJen
#SP1569P w/Filter #X-1014-BR
Injen - Home


AEM
PART#21-517
AEM


Fujita
#CA-1920 (Dx, Lx, Ex) **Manual Only**
F5 Fujita, Intake Systems, Air Intakes, Cold Air Intake Systems, F5 Air, Short Rams


Short ram induction (SRI)
AEM - DC SPORTS
AEM
Powder coated blue.
Part #: 22-517B

Polished/Silver
Part #: 22-517P

Powder coated red.
Part #: 22-517R


Exhaust systems

AEM - DC SPORTS
AEM
Single canister stainless steel cat-back exhaust system.
Part #: SCS7036
$724.50

GREDDY Ti-C Cat-back Exhaust w/ Titanium Tip

Pipe Diameter: 60mm
Part#: 10157907
Price: Around $450

MagnaFlow Cat-back Exhaust

Pipe Diameter:
Part #:
Price: Around $420


TANABE Concept G Axle-back Exhaust

Pipe Diameter:

Part #:

Price: Around $280



Boost kits

AJP Turbo (Warning!! Stay away from this product)
http://www.fgcoupe.com/forum/showthr...hlight=torredo
AJ Performance - AJ Performance, llc


RedShift Motorsports
*The kit for the R18 as far as i know is still on the cutting board.
Red Shift Motorsports Home Page
*Discussion on hopefully the future of the R-series S/C Kit
2006 Civic Si Information

Underdrive Pulleys

now i dont know the Rep of this stuff but here it goes...

NST PULLEYS LINK



NST21915 15% Underdrive Crank 06-07 Civic 1.8 R18
$125.00

NST21922 15% Overdrive Alternator 06-07 Civic 1.8 R18
$88.00

NST21925 WP-Lite Water Pump 06-07 Civic 1.8 R18
$88.00

NST21915KIT 15% Crank, 15% Alternator, WP-Lite Water Pump 06-07 Civic
1.8 R18
$259.00

APPEARANCE


Quote:
Interior/Exterior

Tourren, Import trenz, etc...
http://www.fgcoupe.com/forum/showthr...hlight=torredo


Honda factory performance (HFP)
http://automobiles.honda.com/civic-s...cessories.aspx


Wind splitter (fg2k20z306 thread)
http://www.fgcoupe.com/forum/showthr...hlight=torredo


Hoods (Carbon fiber)
VIS Racing
Carbon Fiber, Hoods and Trunks, Body Kit, Vis Racing, spoiler, fender, doors, wings, wholesale and manufacturer


Seibon
Seibon Carbon Fiber Products: Hoods, Trunk Lids, Fenders, Lip Spoilers, Accessories...


Vertical doors (Lambo)
Includes:
2 gas shocks
2 VDC hinges (one for each side)
All mounting hardware
$1599.00
www.verticaldoors.com


Seats/Rails/Etc...

Buddy club
Car seat rails (06 Civic) *New


Recaro


Corbeau


Shift knobs
Skunk2
#627-99-0080
Weight: 1.20 pounds


Wheels/Tires

CoreRacing
http://www.kaltire.com/retail/custom...ore_racing.php


Motegi
Motegi Racing Performance Wheels: Official Website


Guages
Autometer
Auto Meter


Defi
Defi - Gauges & Head up displays

SUSPENSION/CHASSIS


Quote:
Tanabe Sustec H-Brace
*Does not fit with aftermarket downpipe!


Honda stabilizer bars (*From FG2 - Si)
*Both front & rear bars are a direct fit for DX/LX/EX
coupes. Parts needed will include:
(F & R) stabilizer bars
Stabilizer bar brackets for bushings
L-brackets (rear)
Bolts (for L-brackets)
Bushings (All)
end-links (rear) ~ (*Dont need any for the front*)


Progressive swaybars
The Progress Group, Inc. Online Store


Springs

Eibach (Pro-kit, Sportline)
www.eibach.com

Tein
TEIN USA


Camber kit

Skunk2 (Adjustable 3" in/out)
skunk2.com
516-05-0525: 2006 CIVIC (ALL) GOLD ANODIZED
516-05-0520: 2006 CIVIC (ALL) HARD ANODIZED


Short shifter
TWM w/Alloy bushings
Short Shifters by TWM Performance

Brakes

Quote:
Rotors/Disc
EBC 10.3" Dia.


Magnumbrakes
Drilled rotors DX/LX/EX
Magnum Brakes, Reliable and Professional


Hawk Performance)
Hawk Performance Brake Pads: Race Proven, Street Legal


Converting DX rear drums to EX discs
*This is possible by purchasing all necassary parts for the rear such as spindels, rotors, pads, lines, etc, as the brake master is the same on all DX/LX/EX models. Suggestions:
Find an EX in a junkyard for parts!

strut bars
SpeedLab - Strut Bars
 

·
Registered
Joined
·
253 Posts
Converting DX rear drums to EX discs
*This is possible by purchasing all necassary parts for the rear such as spindels, rotors, pads, lines, etc, as the brake master is the same on all DX/LX/EX models. Suggestions:
Find an EX in a junkyard for parts!
Has anyone does this successfully as of yet? any pics? cost?
 

·
Registered
Joined
·
337 Posts
1 - 14 of 14 Posts
Top