8th Generation Honda Civic Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
222 Posts
Discussion Starter #1
12.2'' wilwood bbk. The plan is for them to go behind a pair of rpf1's 17x.9.5 +38. Seeing as they clear 18x8 +35 for example. Please correct me if any of my 'specs' are wrong. positive helpful feedback greatly appreciated
From stock si wheels (17x7 +35) to 8 I calculated an extra 12.7 mm clearance (taking into acct only .5 inch (going from 7in wide to 8in)).
Now, I've read that the oem 17s require a spacer. With all this into account, he 9.5's shoudl give me about 31.75mm extra (taking into acct only 1.25in as the wheel is 2.5 wider than stock) but .12in less bc of the 3mm diff which comes from the offset.
So I should have more than plenty of clearance to run these correct?



ty 'tehcodeman' for your specs
 

·
CHOO-CHOO!!!!!!
Joined
·
14,929 Posts
I'm no wheel fitment expert by any means, but I'm fairly sure they'll clear with no issues on the aftermarket wheels. I don't think there's a chance of them clearing without spacers on the stock rims though.
 
1 - 4 of 4 Posts
Top