8th Generation Honda Civic Forum banner

Hybrid Racing Group Buy Silicone Radiator Hoses

28138 Views 243 Replies 37 Participants Last post by  roe956
Since some of the R18 guys are interested in our radiator hoses, we are looking to get a group buy going for them. They will be available in black, purple, green, and grey.

Post up in here and I will add you to the list. We need 15 people to purchase them to make this happen.

They will be $79.99 and will include the upper, lower, & the filler neck.

• Silicone with multi-layer nylon wrap
• Pressure and heat resistant from -165° to 350° Fahrenheit.
• Replace those haggard, cracking rubber radiator hoses with pure sex
• Dress up your engine bay with durable, easy-to-clean silicone hoses

Here is a couple pics of the SI Hoses we currently have out:​









If you have any more questions feel free to contact me via email, pm, phone.
Tim Schultz
Sales
[email protected]
225.932.9588 ext. 102​

1. 420coupe (black)
2. Osix4drMuGeNLX
3. BcZay
4. 8thgenInAL (black)
5. scooter (black)
6. mn_natv (black)
7. 07LX (black)
8. flomaa6 (black)
9. sk8nava (purple)
10. NickC89 (black)
11. dguidos820 (grey)
12. 08LXOwner (green)
13. Blue JDM Coupe1016 (black)
14. nam_man03 (green)
15. wingrunr21 (black)
See less See more
4
21 - 40 of 244 Posts
Sweet
Ill add you!

hybrid.. id also start a thread about the R18 motor mounts :dance: :eyebrows:
I will start a thread in here when we get closer to knowing for sure that we can get them :)
What do these do for the car? I might be in for some black ones. So 79.00 for the hoses and you said 12-15 for shipping? So close to 100.00?
What do these do for the car? I might be in for some black ones. So 79.00 for the hoses and you said 12-15 for shipping? So close to 100.00?
Yes sir. These not only look a million times better than stock, they will be the radiator hoses you will need. Made with multi-layer fiberglass reinforcement silicone and finished with a durable silicone outer layer, they’re pressure and temperature resistant from -165° to 350°F. We’ve also altered the upper hose geometry to provide an extra inch of clearance for your cold air intake, eliminating interference and keeping everything clean
Oh please yes r18 motor mounts. Need a test car for anything I'm local let me know.

Also I'm in for black hoses.
:yeahthat: !!! do it
I think they have somebody else closer to them to test their stuff 420coupe but I will always be willing to if needed. I want there to be a market out there for the R18 peeps.


So the upper hose is altered? Can you tell me how because my turbo intake runs between the two radiator hoses and it's already a tight fit.
I am in for a set in black.
When do we pay for these things? I sent you guys a pm but haven't heard back yet.
I think they have somebody else closer to them to test their stuff 420coupe but I will always be willing to if needed. I want there to be a market out there for the R18 peeps.


So the upper hose is altered? Can you tell me how because my turbo intake runs between the two radiator hoses and it's already a tight fit.
Once we get them here and prototyped I will let you guys Know about fitment. These may be more OEM than the SI hoses.

I am in for a set in black.
Got you down :)

I'm in for a black set as well.
Awesome!

When do we pay for these things? I sent you guys a pm but haven't heard back yet.
You have a PM
Just a suggestion. If you could in anyway make the lower hose so it allows more room in-between the two hoses it would be really useful to turbo R18 applications
Just a suggestion. If you could in anyway make the lower hose so it allows more room in-between the two hoses it would be really useful to turbo R18 applications
I will keep that in mind!
21 - 40 of 244 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top