8th Generation Honda Civic Forum banner
  • Hello Everyone! Let us know what you would spend a $50 Amazon gift card on, HERE For a chance to win a $50 Amazon Gift Card!
1 - 17 of 17 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter · #1 · (Edited)
Not sure if it's been posted before, but I figured i'd show you what
Team MM Japan is doing with the civic.
Some of these parts could be used on the FG as well as the FD2
So if you're a coupe driver, don't lose faith!
If you don't speak or read japanese at all, you'd have a hard time navigating the site, so i wont bother posting it.
















These parts can be bought, but once again, if you don't have a crate(for shipping) or speak japanese, you wont be able to get them unless you go through someone. Team MM is strictly japan from what i've seen. Enjoy!! <3
 

·
Registered
Joined
·
5,194 Posts
Hmm I really like the looks of that Carbon Intake piece. I wonder if its just a cover though cause it looks like the OEM intake tube is still intact.

My best friend is in korea now and will be in Japan in a few days, hmmm....
 

·
Registered
Joined
·
8,756 Posts
Edit: catalog page: http://www.mandm-honda.com/fd2_newparts_page.html

Mod list of the M&M CTR (I've translated)

M&M Honda Super Titanium EX System 278,000 yen
M&M Ohlins Special Type 1 (damper) set 390,000 yen
M&M Carbon air cleaner box & cleaner 37,000 yen / 9,600 yen
M&M Circuit straight-pipe (instead of cat) 16,800 yen
M&M Carbon LSD and clutch 161,000 / 126,00 yen
M&M rear torque damer set beam 38,000 yen
M&M Dual-sided full CF hood 98,000 yen
M&M Carbon GT wing 113,200
M&M AP racing brake system 398,000 yen
M&M brake pad (price included above)
M&M stainless brake mesh line (price included in above)
M&M stainless mesh clutch hose 9,800 yen
speed limiter cut 13,500 yen
Recaro bucket seats
Takata four-point belt
Wheel/tires: F 245/40/17 17x9 et43; R 225/45/17 17x7.5 et48
Engine oil -- Motul 300 Vpowerracing 5W-40
Tranny oil -- ASH FSE 85W-120
Brake oil -- Motul 600
 

·
Registered
Joined
·
8,756 Posts
The CF intake cover is just that--a replacement cover. According to the site they're doing R&D for the intake duct, so that's coming later down the line.




 

·
Registered
Joined
·
5,194 Posts
aki, thank you for the translation/ info, I appreciate it.

it may only be a replacement cover but ti does look good I'll give them that, but for 37,000 yen which is almost $340 I'll pass.
 

·
Registered
Joined
·
101 Posts
need specs on these bad boys!! :eek:mg:

Specifications
Attenuation power adjustment: 20 step adjustments/front and back
Attenuation power setting: Custom
Camber setting: 2.5 degrees (degree of ±0.5)
Height adjustment range: Possible F /±0 mm - -45 mm R/±0 mm - -45 mm(±5 mm)
Front damper structure: Inverted system
Rear damper structure:Total length height adjustment system
Effective stroke: M & M setting
Bump rubber: Urethane
Shock structure: Single tube system
Case material: Steel (uniqueness processing)
Piston diameter: Front /40 Ф rear 50 Ф
Spring: Doesn't seem to specify spring rate, and my knowledge of Japanese is limited. Whatever online translator I used didn't give me the stuff I wanted :D

The rear shocks are awesome tho. The adjustment perch is on the damper body and not on the spring perch, so even if you adjust the ride height, you don't lose damper stroke. AWESOME.

Wonder when my shop's going to start bringing some in for these new baller civic owners :D

edit: The M&M shocks are Ohlins, with M&M in-house valving I believe. I'll look more into this.
 
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top