Here's my "Do-It-Yourself" install of PAC Steering Wheel Interface for an aftermarket headunit.
Materials & Tools
- PAC SWI-PS (for Pioneer and Sony headunits with Wired Remote Input)
- Electrical tape
- Wire Stripper/Crimper
- 5100 ohm or 5.1 K ohm resistor *green-brown-red-gold order color*
(included in the package)
- Extra Ground wire
- T-Taps or Wire Splicer
Just follow the Diagrams and Picture in connecting the wires. :thumb:
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
If you have questions about the install just PM me.
Thanks to Jza & Quality_Sound for the info. :thumb:
Materials & Tools
- PAC SWI-PS (for Pioneer and Sony headunits with Wired Remote Input)
- Electrical tape
- Wire Stripper/Crimper
- 5100 ohm or 5.1 K ohm resistor *green-brown-red-gold order color*
(included in the package)
- Extra Ground wire
- T-Taps or Wire Splicer
Just follow the Diagrams and Picture in connecting the wires. :thumb:
If you have questions about the install just PM me.
Thanks to Jza & Quality_Sound for the info. :thumb:
