8th Generation Honda Civic Forum banner

Crespo stage 5 cams in fa5

3615 Views 13 Replies 5 Participants Last post by  MRBOOST_915
Well guys i just wanted to give my feedback on stage 5 Crespo camshafts that are going in my motor as we speak. Running supertech 95 psi springs and gonna get tuned by Steve at etunez. As the installation goes on I will post more pictures of the installation and hopefully even a dyno with video when done.

Going in as a guinea pig here, wish me luck:beer:

Mods list:
Stock K20z3 engine
Skunk2 Cai modded delete coupler
580cc Bosch ev14 injectors
Skunk2 alpha headers
3in catback exhaust
Hondata Flashpro
Ported by me IM
Supertech 95 psi dual springs
Skunk2 seats, supertech ti retainers and cotters
Gonna get it tuned by Steve etunez

Here's a pic of the cams as they came in today

Supertech ti retainers and cotters

YouTube video of startup


Runs great getting tuned, videos of me ripping up the streets
See less See more
1 - 8 of 14 Posts
These were out since 2009 but similar to skunk2 chain slap.. skunk2 tuner series stage 5 cam.

Still haven't fully tuned but basemap feels good
Posted videos!!

They were quickies but still needs 2-3 edits on the tune.. waiting for Steve Etunez when i get back from my vacation. I was able to tune in the fuel and lower low cam to 0* as skunk2 cams need to be adjusted to.
Stock rev for now lets gonna wait to see how the oil comes back

cams were so horrible designed they popped my tensioner from all the chain slap i even tuned it to a 0* cam angles and still broke it. I heard a big air leak comming from my motor. Then i removed my tensioner and noticed air bubbles coming out on the side of the piston.
Got chain stretch from the cams after only 200 miles. Crap Cams
Removed from my car months ago
1 - 8 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.