[henrytheappraiser]

I just got a clean set of Si seats .It did not come with the seat belts and some of the wiring was cut off. Do you think I can use the seat belts and wire loom from my LX-s Seats. Are there any concerns with that please advise. Thank you in advance

 

[SiBurtonGuy]

The seatbelts should be the exact same between all models, except maybe the straps being different colors. The wiring in the seats is for the in-seat airbag, which should also be the same across all models, but if they cut the coupler off I would recommend not messing with it unless you are comfortable soldering and you have access to a replacement set of couplers to replace the cut-off ones.

 

[FuntanaS]

Whenever you change the passenger seat the weight sensor must be reprogrammed.

 

[henrytheappraiser]

The seatbelts should be the exact same between all models, except maybe the straps being different colors. The wiring in the seats is for the in-seat airbag, which should also be the same across all models, but if they cut the coupler off I would recommend not messing with it unless you are comfortable soldering and you have access to a replacement set of couplers to replace the cut-off ones.

Thank you. Do you know if the airbags will still function the same? Will the original Air bag computer work with the Si Seats?

 

[henrytheappraiser]

Do you know if the airbags will still function the same? Will the original Air bag computer work with the Si Seats?

 

[SiBurtonGuy]

I imagine all the airbags work the same as that would've been a standard piece of safety equipment across all trims.

 

[FuntanaS]

Do you know if the airbags will still function the same? Will the original Air bag computer work with the Si Seats?

Yes, but you will need to get the passenger seat weight sensor recalibrated. Otherwise you will have an airbag light and the passenger airbags may not work.