8th Generation Honda Civic Forum banner

1 - 20 of 156 Posts

·
Registered
Joined
·
4,131 Posts
Discussion Starter #1 (Edited)
I thought I'll make a thread since I seen a lot of people don't seem to know what parts are available for N/A applications.

Lets start off with the basic intakes.
Short Ram Intakes (SRI)
  • AEM SRI
  • CT Engineering Intake
  • COBB Tuning SF Intake System
  • Fujita SRI
  • Gruppe-M
  • Injen MR SRI
  • K&N Typhoon SRI
  • Mishimoto SRI
  • Password:JDM Carbon Fiber PowerChamber Intake
  • PRM Intake
  • Takeda SRI
  • Top Fuel SRI
  • X-Intake
Cold Air Intakes (CAI)
  • AEM CAI
  • Fujita CAI
  • Injen MR CAI
  • T1R Carbon Intake System

Header
  • ASP
  • Buddy Club Race Header
  • Comptech Stainless Steel Header (Shorty)
  • DC Sports Race Header
  • EZR Performance Race Header
  • HUR Performance Race Header
  • Hybrid Racing Race Header
  • Hytech Header
  • Invidia Race Header
  • Kiddracing Dominator Race Header
  • Megan Racing Shorty Header
  • Skunk2 Race Header
  • SSR Header
  • Strup Performance Race Header (Ceramic)
  • Strup Performance Race Header (Stainless)
  • T1R Power Header
  • Toda High Power Exhaust Manifold
  • Vibrant Race Header With High Flow Cat
  • Vibrant Race Header Without High Flow Cat

Test Pipes
  • Megan Racing Test Pipe
  • T1R Racing Test Pipe
  • Ebay Test Pipe

High Flow Cats
  • Random Technology High Flow Cat

Exhaust
  • A'pexi N1 Catback (60mm)
  • A'pexi NOIR Catback
  • A'pexi World Sport 2 (60mm)
  • Borla
  • Buddy Club Racing Pro Spec Exhaust
  • Comptech Stainless Catback (63.5mm)
  • DC Sports Stainless Steel Exhaust
  • Go-Power Motorsport (3 Inch)
  • Greddy Dynamic-Tune
  • Greddy Evo 2 (60mm & 70mm)
  • Greddy Spectrum Elite (SE) Exhaust
  • Greddy Street Performance 2
  • Greddy Ti-C (60mm)
  • Honda Factory Performance Axle-Back
  • HKS Sport-Ti
  • Hytech Catback
  • Invidia N1 Catback
  • J's Racing 60RS Titanium FX
  • Legal Speed Design Power-4 (63.5mm)
  • Legal Speed Design J-Sport
  • Magnaflow Factory Exit Stainless Steel Catback
  • Megan Racing Midpipe
  • Megan Racing Catback
  • Megan Racing Axle Back Exhaust (Axleback)
  • Mugen Cat-Back
  • Neuspeed Stainless Steel Catback (60mm)
  • Skunk2 Mega Power Catback (60mm & 70mm)
  • Spoon N1 Muffler
  • Spoon Sports Muffler
  • Tanabe Concept G (Axleback)
  • Tanabe Medalion Touring
  • T1R 63S
  • T1R 70R
  • Toda High Power Exhaust
  • Tsudo N1 Stainless Steel Catback
  • Vibrant Street Power Catback (63.5mm)
  • Vibrant Street Power Catback Version 2

Throttle Body
  • Accord Throttle Body
  • Golden Eagle Throttle Body Spacer
  • Helix Throttle Body Spacer
  • Karcepts Throttle Body Spacer
  • P2R Throttle Body Spacer
  • Spoon Venturi Throttle Body
  • TSX Throttle Body
  • TL Throttle Body

Cooling Plates
  • Password JDM Cooling Plate

Camshafts
  • Blue Print Racing Stage 2 Cams
  • Blue Print Racing Stage 3 Cams
  • Blue Print Racing Stage 4 Cams
  • Brian Crower Stage 2 Cams
  • Brian Crower Stage 3 Cams
  • Buddy Club Spec 1 Cams
  • Buddy Club Spec 2 Cams
  • Buddy Club Spec 3 Cams
  • Buddy Club N+ Cams
  • IPS K2 Cams
  • Kelford Stage 1 Cams
  • Kelford Stage 2 Cams
  • Kelford Stage 3 Cams
  • OBX Stage 1 Cams
  • OBX Stage 2 Cams
  • OBX Stage 3 Cams
  • RCrew Cams
  • Skunk2 Stage 1 Cams
  • Skunk2 Stage 2 Cams
  • Skunk2 Stage 3 Cams
  • Toda Racing Spec C Cams
  • Toda Racing N2 Cams
  • Toda Vtec Killer Cams
  • Toruku Cams
  • Hytech Cams

Intake Manifold
  • BluePrint Custom Manifold
  • Skunk2 Pro Series Intake Manifold
  • RRC

Fuel Rail
  • P2R K Series Fuel Rail
  • Skunk2 Composite Fuel Rail
  • K-Tune
  • Hybrid Racing

Timing Chain Tensioner
  • Chunky's Antifail Timing Chain Tensioner
  • Hybrid Racing Timing Chain Tensioner
  • Skunk2 Timing Chain Tensioner

Pulleys
  • NST Pulley Kit
  • Ralco RZ Pulley Set
  • T1R Crankchaft Pulley
  • Unorthodox Pulley Set

Gaskets
  • Hondata Intake Manifold Gasket
  • P2R Intake Manifold Gasket
  • Corsport Intake Manifold Gasket

Valvetrain
  • Blueprint Manufacturing Valve Springs
  • Blueprint Manufacturing Retainers
  • Brian Crower Dual Valve Springs
  • Brian Crower Titanium Retainers
  • Buddy Club P-1 Racing Dual Valve Springs
  • Buddy Club P-1 Racing Titanium Retainers
  • Skunk2 Pro-Series Valve Springs
  • Skunk2 Titanium Retainers
  • Supertech Valve Springs

Motor Mounts and Torque Dampeners
  • Boomba Motor Mounts
  • Innovative Replacement Steel Motor Mounts 60A Street
  • Innovative Replacement Steel Motor Mounts 75A Track
  • Innovative Replacement Steel Motor Mounts 85A Race
  • Innovative Replacement Steel Motor Mounts 95A Extreme
  • Ingalls Stiffy Engine Torque Dampener
  • Ingalls Stiffy Engine Dampening Power Stick

Gears
  • MFactory Close Ratio Gears
  • MFactory PRO Series Gears
  • Quaife ATB Helical LSD Differential
  • Wavetrac Limited Slip Differential

Radiators
  • Mishimoto Radiator
  • Samco Silicone Radiator Hose Kit

Rods
  • BluePrint H-Beam
  • BluePrint I-Rods
  • BluePrint Pro I-Rods

Here is the list of the parts I have found available for you N/A guys. If you have anything to add, just post it and I'll add it. Also please don't post any useless replys. Also I won't post any prices since each vendors have different prices and shipping rates and etc.
Hope it'll help some of you guys out on deciding for parts. :thumb:
 

·
Registered
Joined
·
9,758 Posts
good job. this should be a sticky.
 

·
Registered
Joined
·
816 Posts
I thought I'll make a thread since I seen a lot of people don't seem to know what parts are available for N/A applications.

Lets start off with the basic intakes.
Short Ram Intakes (SRI)
  • AEM SRI
  • Fujita SRI
  • Injen MR SRI
  • K&N Typhoon SRI
  • T1R Carbon Intake System
  • Top Fuel SRI
  • X-Intake
Cold Air Intakes (CAI)
  • AEM CAI
  • Injen MR CAI

Header
  • Buddy Club Race Header
  • Comptech Stainless Steel Header
  • DC Sports Race Header
  • HUR Performance Race Header
  • Strup Performance Race Header (Stainless)
  • T1R Power Header
  • Vibrant Racer Header

Test Pipes
  • T1R Racing Test Pipe

Exhaust
  • A'pexi N1 Catback
  • A'pexi World Sport 2
  • Borla
  • Buddy Club Racing Pro Spec Exhaust
  • Comptech Stainless Catback
  • Greddy Evo 2
  • Greddy Ti-C
  • HKS Sport-Ti
  • Invidia N1 Catback
  • Magnaflow Factory Exit Stainless Steel Catback
  • Megan Racing Midpipe
  • Megan Racing Catback
  • Neuspeed Catback
  • Skunk2 Mega Power Catback
  • Tanabe Concept G
  • Tanabe Medalion Touring
  • T1R 63S
  • T1R 70R
  • Tsudo N1 Stainless Steel Catback
  • Vibrant Street Power Catback

Throttle Body
  • P2R Throttle Body Spacer
  • Spoon Venturi Throttle Body

Camshafts
  • Brian Crower Stage 2 Cams
  • Brian Crower Stage 3 Cams
  • Skunk2 Stage 1 Cams
  • Skunk2 Stage 2 Cams
  • Skunk2 Stage 3 Cams
  • Hytech Cams

Pulleys
  • NST Pulley Kit
  • T1R Crankchaft Pulley
  • Unorthodox Pulley Set

Here is the list of the parts I have found available for you N/A guys. If you have anything to add, just post it and I'll add it. Also please don't post any useless replys. Also I won't post any prices since each vendors have different prices and shipping rates and etc.
Hope it'll help some of you guys out on deciding for parts. :thumb:
you're missing quite a few things its usually same for header and exhaust.

hytech (exhaust, header)
ssr (header)
toda (exhaust, header)
blueprint cams (2 and 3)
obx cams
original crower cams (im not sure if his dad made cams for the k series)?
ips camshafts (k2s)
rcrew 101 cams
drag cartel cams
etc....

gruppe-m intake
j's racing intake
mugen exhaust
j's racing exhaust titanium
 

·
Registered
Joined
·
4,131 Posts
Discussion Starter #11
you're missing quite a few things its usually same for header and exhaust.

hytech (exhaust, header)
ssr (header)
toda (exhaust, header)
blueprint cams (2 and 3)
obx cams
original crower cams (im not sure if his dad made cams for the k series)?
ips camshafts (k2s)
rcrew 101 cams
drag cartel cams
etc....

gruppe-m intake
j's racing intake
mugen exhaust
j's racing exhaust titanium
Added some of the parts. But couldn't find all of them. I'll add it slowly when I find some info on the parts.
 

·
Registered
Joined
·
4,131 Posts
Discussion Starter #13
k20a.org baby hahaha thats where i usually go when i look furture into things. still dont have the j's racing exhaust up there!
That's because J's racing doesn't seem to have anything listed for the FD2/FG/FA. All I saw was parts for EP, DC2, DC5 and etc.
 

·
Registered
Joined
·
722 Posts
you're missing quite a few things its usually same for header and exhaust.

hytech (exhaust, header)
ssr (header)
toda (exhaust, header)
blueprint cams (2 and 3)
obx cams
original crower cams (im not sure if his dad made cams for the k series)?
ips camshafts (k2s)
rcrew 101 cams
drag cartel cams
etc....

gruppe-m intake
j's racing intake
mugen exhaust
j's racing exhaust titanium
ips ftw
 

·
Registered
Joined
·
16,555 Posts
Your forgeting the ebay testpipe. forget the name of the company who makes it.
 
1 - 20 of 156 Posts
Top