8th Generation Honda Civic Forum banner
throttle body
1-5 of 5 Results
  1. Car Builds
    I recently ordered a j35 throttle body for my 2009 Honda Civic si, I thought it was going to be just a plug in play, but after seeing videos on YouTube they say that the car would have to be tuned because it’s too much air going in. So would I have to buy the flash pro ? Or what advice can y’all...
  2. Mechanical Problems & Technical Chat
    Hey, I've been dealing with this code for the past week or so. When driving the car would suddenly lose power when the CEL turned on. I replaced the throttle body and the accelerator pedal, now the car runs fine but the CEL comes on and the car gains power as in idles at 1800 RPM etc. Not too...
  3. Intake & Spacer Discussion
    It wasnt my intention to buy an 09 tsx TB the seller made the mistake when listing the items year/model and i didnt realize it was missing the metal vac line on top. I actually pulled it off and managed to seal the bottom cavity using a thermal 70mm gasket. though i had to combine the brake...
  4. Intake & Spacer Discussion
    This is a new product we're offering that is a little bit different from the other throttle body upgrades out there. The throttle body used in this package is from a Honda J37 motor, and features a huge 80mm inlet that tapers to 70mm at the throttle plate. We use very high quality AN fittings...
  5. Bolt-Ons And All-Motor
    Help! I recently purchased a 2006 civic EX and I do not know a whole lot about vehicle modification. Here are some basic questions... if anyone can help me out I would be greatly appreciated. This is what I know: The air intake feeds the engine with air. The path that the air takes...
1-5 of 5 Results
Top