Help Deciding

eh3 · 05-17-2008, 07:36 PM

I'm looking at ordering Konig Unknown wheels and putting them on my 07 Civic EX ..
I new here and was wondering what size tires/wheels should I get ?
I'm thinking about 18's but what about the tire size and what tires specifically ?
I'm wanting some really good all season tires, such as Goodyear's Assurance TripleTread but I don't think they make them in 205/40/18, 215/40/18 or 225/40/18.. I'm wanting to keep somewhat or a smooth ride and I'm afraid of going with a really small tire because of the rougher ride, but I want it to still look good, not a whole lot of tire..

Does this make any sense ? haha

eh3 · 05-26-2008, 05:50 PM

Anybody ? ?

***iluvmycsx*** · 05-26-2008, 06:07 PM

welcome to the site

depending on if you plan on lowering you car you could run a wider tire

there are a threads stickied that will help you with you decision

Wheel Fitment Recipe - wheel offsets that work

Tire Sizes that are OK to use...

as for the unkowns there not my style but if you like them thats all that matters

eh3 · 05-26-2008, 06:24 PM

What's the offset ? I'm new to upgrading wheels ..

I'm not planning on lowering it.. I'd like 18" ones though ..

***iluvmycsx*** · 05-26-2008, 06:28 PM

before you buy do some research there is lots of info on this site that is a search button away.

read through the two threads i linked in previous post

05-17-2008, 07:36 PM	#1 (permalink)
eh3 Senior Member Join Date: May 2008 Location: Henderson, KY Age: 23 Posts: 173 Jordan iTrader: 0 / 0%	Help Deciding I'm looking at ordering Konig Unknown wheels and putting them on my 07 Civic EX .. I new here and was wondering what size tires/wheels should I get ? I'm thinking about 18's but what about the tire size and what tires specifically ? I'm wanting some really good all season tires, such as Goodyear's Assurance TripleTread but I don't think they make them in 205/40/18, 215/40/18 or 225/40/18.. I'm wanting to keep somewhat or a smooth ride and I'm afraid of going with a really small tire because of the rougher ride, but I want it to still look good, not a whole lot of tire.. Does this make any sense ? haha

05-26-2008, 06:07 PM	#3 (permalink)
*iluvmycsx* Skunk2 Airlines Member#63 Join Date: Dec 2005 Location: Regina - The City That Rhymes with Fun Age: 31 Posts: 21,835 Mike/Mikey but not Michael!!!! iTrader: 7 / 100%	welcome to the site depending on if you plan on lowering you car you could run a wider tire there are a threads stickied that will help you with you decision Wheel Fitment Recipe - wheel offsets that work Tire Sizes that are OK to use... as for the unkowns there not my style but if you like them thats all that matters __________________ My Ride Last edited by iluvmycsx; 05-26-2008 at 06:09 PM.

05-26-2008, 06:28 PM	#5 (permalink)
*iluvmycsx* Skunk2 Airlines Member#63 Join Date: Dec 2005 Location: Regina - The City That Rhymes with Fun Age: 31 Posts: 21,835 Mike/Mikey but not Michael!!!! iTrader: 7 / 100%	before you buy do some research there is lots of info on this site that is a search button away. read through the two threads i linked in previous post __________________ My Ride

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trading the SI in I need help deciding whats next!!	BubzSI	Driving Experience	72	05-26-2008 06:36 AM
Need Help deciding	brownsgolf	Garage	4	02-21-2007 06:56 PM
deciding for new rims	r4bb1t3	Civic Coupe And Sedan	1	12-26-2006 01:51 PM
Need Help Deciding	brownsgolf	Wheel And Tire Upgrades	2	12-19-2006 11:57 PM
Need Help deciding	brownsgolf	Inside and Out	10	11-30-2006 11:13 AM

05-26-2008, 05:50 PM	#2 (permalink)
eh3 Senior Member Join Date: May 2008 Location: Henderson, KY Age: 23 Posts: 173 Jordan iTrader: 0 / 0%	Anybody ? ?

05-26-2008, 06:24 PM	#4 (permalink)
eh3 Senior Member Join Date: May 2008 Location: Henderson, KY Age: 23 Posts: 173 Jordan iTrader: 0 / 0%	What's the offset ? I'm new to upgrading wheels .. I'm not planning on lowering it.. I'd like 18" ones though ..