Recommendations for drag wheels....

06Fg2 · 08-21-2007, 05:49 AM

Well, I tried searching, but it seems that not many people are running slicks/drag radials. I remember seeing that there were a few 15" wheels that would fit over the SIs calipers, but I can't seem to find what they were. Would you guys recommend going with a 16" wheel? If so, why? I'm also going to be going with drag radials, as they seem to be a little easier on the tranny, but also, advise if I should just get all out slicks.

RANGERSi07 · 08-21-2007, 06:10 AM

subscribed for knowledge also

***Highrev1*** · 08-21-2007, 06:24 PM

15"s are the way to GO!!
The only question is if they will fit the lower seat of the strut assembley From what xlured says :) ....
"Team dynamics pro race 1 wheels in a +35 offset and they fit fine" Thats on the RSX so it will probably be very close for our cars....

originalg00kster · 08-21-2007, 11:12 PM

i would say go 16's. my friend has rota slips on 16's and it fits fine on our cars and his.[rsx type s] but he has some pretty big radials on em...and they grab real good.

***07mugencivic*** · 08-21-2007, 11:13 PM

15 are great for drag...but get some slicks

06Fg2 · 08-30-2007, 11:59 PM

No one else is looking for slicks and wheels?

08-21-2007, 05:49 AM	#1 (permalink)
06Fg2 Senior Member Join Date: May 2006 Location: West Chester, PA Age: 21 Posts: 2,770 FG Squad Member #15 iTrader: 22 / 96%	Recommendations for drag wheels.... Well, I tried searching, but it seems that not many people are running slicks/drag radials. I remember seeing that there were a few 15" wheels that would fit over the SIs calipers, but I can't seem to find what they were. Would you guys recommend going with a 16" wheel? If so, why? I'm also going to be going with drag radials, as they seem to be a little easier on the tranny, but also, advise if I should just get all out slicks.

08-21-2007, 06:24 PM	#3 (permalink)
*Highrev1* 8thcivic Sponsor Join Date: Mar 2006 Posts: 3,689 iTrader: 1 / 100%	15"s are the way to GO!! The only question is if they will fit the lower seat of the strut assembley From what xlured says :) .... "Team dynamics pro race 1 wheels in a +35 offset and they fit fine" Thats on the RSX so it will probably be very close for our cars.... __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new wheels, rota	sweger	Wheel And Tire Upgrades	54	03-29-2007 04:29 PM
Can anyone paint the stock Si wheels on ASM in PS	mhuynh	Photoshop	4	03-15-2007 10:33 AM
Authentic/True Light Weight Wheels ? ? ?	Bombero	Wheel And Tire Upgrades	3	03-10-2007 02:38 AM
Hmmm... New Wheels?	atruhondagrl	Wheel And Tire Upgrades	79	09-04-2006 12:34 PM

08-21-2007, 06:10 AM	#2 (permalink)
RANGERSi07 Senior Member Join Date: Dec 2006 Location: NC/CT/GA Posts: 500 iTrader: 0 / 0%	subscribed for knowledge also

08-21-2007, 11:12 PM	#4 (permalink)
originalg00kster Senior Member Join Date: Nov 2006 Posts: 307 iTrader: 1 / 100%	i would say go 16's. my friend has rota slips on 16's and it fits fine on our cars and his.[rsx type s] but he has some pretty big radials on em...and they grab real good.

08-21-2007, 11:13 PM	#5 (permalink)
*07mugencivic* Whos The Whore NOW Join Date: Feb 2007 Location: Southern CA Age: 24 Posts: 91,962 Toe Knee iTrader: 4 / 100%	15 are great for drag...but get some slicks

08-30-2007, 11:59 PM	#6 (permalink)
06Fg2 Senior Member Join Date: May 2006 Location: West Chester, PA Age: 21 Posts: 2,770 FG Squad Member #15 iTrader: 22 / 96%	No one else is looking for slicks and wheels?