calling out every1 dropped on progress springs or 1.6-1.4" drop

rkalloo · 02-18-2007, 06:40 AM

so if your car is lowered between 1.6 inches to 1.4 inches and u have 18x7.5 +40mm offset wheels on there, what tires are you using??
i got some advice from tim to use 225/40/18 but i just wanted to be 100% sure i wont have any problems whatsoever. any help appreciated thx

**Tim** · 02-18-2007, 12:48 PM

That's not quite what I said:
need quick help

rkalloo · 02-18-2007, 01:33 PM

thanks fo the helpt btw

true butlisten what if i go 225/35/18 will i be better off because it will be a little thinner(the tire)

rkalloo · 02-18-2007, 01:35 PM

oh my bad u said 215/40/18
is the 215 the overall width and the 40 the thickness from the end ofrim to the top of tire? because i think the issue im looking at (rubbing/fitting on my car) is the thickness from rim to fender

02-18-2007, 06:40 AM	#1 (permalink)
rkalloo Senior Member Join Date: May 2006 Posts: 595 iTrader: 0 / 0%	calling out every1 dropped on progress springs or 1.6-1.4" drop so if your car is lowered between 1.6 inches to 1.4 inches and u have 18x7.5 +40mm offset wheels on there, what tires are you using?? i got some advice from tim to use 225/40/18 but i just wanted to be 100% sure i wont have any problems whatsoever. any help appreciated thx

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-18-2007, 12:48 PM	#2 (permalink)
Tim Super Moderator Join Date: Mar 2006 Age: 29 Posts: 5,214 iTrader: 10 / 100%	That's not quite what I said: need quick help

02-18-2007, 01:33 PM	#3 (permalink)
rkalloo Senior Member Join Date: May 2006 Posts: 595 iTrader: 0 / 0%	thanks fo the helpt btw true butlisten what if i go 225/35/18 will i be better off because it will be a little thinner(the tire)

02-18-2007, 01:35 PM	#4 (permalink)
rkalloo Senior Member Join Date: May 2006 Posts: 595 iTrader: 0 / 0%	oh my bad u said 215/40/18 is the 215 the overall width and the 40 the thickness from the end ofrim to the top of tire? because i think the issue im looking at (rubbing/fitting on my car) is the thickness from rim to fender