Curbage Repair

bartone · 12-20-2006, 12:50 AM

so yeah, should i DIY it? if so, how?
or should i just bring it to a shop and have them do it and repaint it... and does anyone know how much it'll cost?

the damage is 3 of the rims from curbage almost all around and one from rocks or sth.

thanks

bartone · 12-20-2006, 12:51 AM

oh btw. i live in Vancouver BC, canada

fa1 · 12-20-2006, 01:31 AM

Some good threads:
How to Paint Your Rims
DIY Rim Repair - So you curbed your new rims

supersly_jones · 12-20-2006, 01:40 AM

i had some curb damage...kinda...i tried pulling into to tight of a spot next to a curb and the curb grabbed onto my inner fender and ripped it all the way out...nastiest sound i've even heard....just had to get new clips...i was lucky

bartone · 12-20-2006, 10:26 PM

thanks. but has anyone gotten a quote on repairs for rims? just so i know the ball field?

bartone · 12-25-2006, 02:28 AM

anyone?

Jester FPS · 12-25-2006, 03:09 AM

I'm interested in a quote too. For 18in alloys.

***Special Ringpop*** · 12-25-2006, 03:23 AM

There are shops that do this for an acceptable amount.

I just don't know of any, sadly...

I also have the same problem.

**marc-o-lishuz** · 12-25-2006, 04:38 AM

$100-150/rim is reasonable (depending on the construction and finish of the rim)

12-20-2006, 12:50 AM	#1 (permalink)
bartone Senior Member Join Date: Oct 2006 Location: Richmond, BC Age: 21 Posts: 1,316 Justin iTrader: 1 / 100%	Curbage Repair so yeah, should i DIY it? if so, how? or should i just bring it to a shop and have them do it and repaint it... and does anyone know how much it'll cost? the damage is 3 of the rims from curbage almost all around and one from rocks or sth. thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Finally Pics After Repair CF hood, exhaust, fogs	Wreckless06si	Introduction & Pictures	43	04-06-2007 11:15 PM
scratch repair costs	jda07Si	Detailing	9	11-07-2006 08:54 AM
Urgent!!How much for the repair of my car	zspeedzkwy	Detailing	6	11-07-2006 01:34 AM
Body Repair	fijiblue06si	Garage	2	07-05-2006 01:56 PM
Dash repair?	jonthomas242	Garage	3	05-03-2006 04:50 PM

12-20-2006, 12:51 AM	#2 (permalink)
bartone Senior Member Join Date: Oct 2006 Location: Richmond, BC Age: 21 Posts: 1,316 Justin iTrader: 1 / 100%	oh btw. i live in Vancouver BC, canada

12-20-2006, 01:31 AM	#3 (permalink)
fa1 Senior Member Join Date: May 2006 Location: SF, CA Age: 19 Posts: 2,418 FA Squad Member #17 iTrader: 1 / 100%	Some good threads: How to Paint Your Rims DIY Rim Repair - So you curbed your new rims

12-20-2006, 01:40 AM	#4 (permalink)
supersly_jones Senior Member Join Date: Jan 2006 Location: funny thing about my back is, is its located on my c**k!! Age: 20 Posts: 1,288 Ryan iTrader: 3 / 100%	i had some curb damage...kinda...i tried pulling into to tight of a spot next to a curb and the curb grabbed onto my inner fender and ripped it all the way out...nastiest sound i've even heard....just had to get new clips...i was lucky

12-20-2006, 10:26 PM	#5 (permalink)
bartone Senior Member Join Date: Oct 2006 Location: Richmond, BC Age: 21 Posts: 1,316 Justin iTrader: 1 / 100%	thanks. but has anyone gotten a quote on repairs for rims? just so i know the ball field?

12-25-2006, 02:28 AM	#6 (permalink)
bartone Senior Member Join Date: Oct 2006 Location: Richmond, BC Age: 21 Posts: 1,316 Justin iTrader: 1 / 100%	anyone?

12-25-2006, 03:09 AM	#7 (permalink)
Jester FPS Senior Member Join Date: Jul 2006 Location: California Age: 23 Posts: 1,262 iTrader: 6 / 100%	I'm interested in a quote too. For 18in alloys.

12-25-2006, 03:23 AM	#8 (permalink)
*Special Ringpop* VIP Member Join Date: Apr 2006 Location: Minneapolis, MN Age: 21 Posts: 6,893 Name: Mike iTrader: 0 / 0%	There are shops that do this for an acceptable amount. I just don't know of any, sadly... I also have the same problem.

12-25-2006, 04:38 AM	#9 (permalink)
marc-o-lishuz FRSH PRNZ OF BL AIR Join Date: Apr 2006 Location: Vancouver, BC Age: 26 Posts: 23,374 Marc iTrader: 2 / 100%	$100-150/rim is reasonable (depending on the construction and finish of the rim)