volk ce28 offset 42/43 - is there a need to run spacers

yiujun · 11-20-2008, 07:17 PM

is there a need to run spacers if i get some volk ce28 with offset 42/43? i have a non-si...

Xenin · 11-20-2008, 07:19 PM

umm, no.

dt07Si · 11-20-2008, 07:23 PM

yes...if there 10" wide

Sorry man, but when you ask such a vague question thats what you get. In all seriousness...what is the width of the wheel?

In any width that would fit a 8thgen you shouldn't have to but it would have been smart to list the width of the wheel.

Xenin · 11-20-2008, 07:25 PM

you run spacers if the offset is like +60, not for +42.

OMGWTFBBQIMDEREK · 11-20-2008, 09:38 PM

With an offset of roughly 42/43, you don't have a problem running widths from 7" to 8.5", which is the preferred width of about 95% of this site. So, with that being said, you don't need spacers.

yiujun · 11-20-2008, 10:21 PM

thanks guys lol i didnt realize i was being vague, i thought spacers were only needed b/c of the wrong offset.. i was also afraid of different hub bore size.. but yeah they would definitely be 7-8 width..

paolo2k2 · 11-20-2008, 11:58 PM

wrong offset but if you think about it its only 2 mm off...

11-20-2008, 07:17 PM	#1 (permalink)
yiujun Senior Member Join Date: Mar 2008 Location: Richmond, BC Age: 23 Posts: 306 iTrader: 1 / 100%	volk ce28 offset 42/43 - is there a need to run spacers is there a need to run spacers if i get some volk ce28 with offset 42/43? i have a non-si...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Volk / RAYS Time Attack WHITE CE28	Gecko12314	Wheel And Tire Upgrades	17	02-10-2008 03:23 AM
Tire sizes for 17x7 offset 43	baskero	Wheel And Tire Upgrades	9	04-07-2007 12:15 AM
43 or 48 offset ???	JeShUa	Wheel And Tire Upgrades	12	07-13-2006 06:08 PM
1 set : 17x7 VR CE28 Silver 10H (5x114.3/5x100) ET 42	type-si	Wheel And Tire Upgrades	2	05-24-2006 05:46 PM

11-20-2008, 07:19 PM	#2 (permalink)
Xenin Senior Member Join Date: Jun 2005 Location: Brampton Age: 26 Posts: 4,066 K.C. -- Captain Projectors iTrader: 2 / 100%	umm, no.

11-20-2008, 07:23 PM	#3 (permalink)
dt07Si Senior Member Join Date: Mar 2007 Location: Dirty Jerz Age: 23 Posts: 4,272 Dave iTrader: 1 / 100%	yes...if there 10" wide Sorry man, but when you ask such a vague question thats what you get. In all seriousness...what is the width of the wheel? In any width that would fit a 8thgen you shouldn't have to but it would have been smart to list the width of the wheel.

11-20-2008, 07:25 PM	#4 (permalink)
Xenin Senior Member Join Date: Jun 2005 Location: Brampton Age: 26 Posts: 4,066 K.C. -- Captain Projectors iTrader: 2 / 100%	you run spacers if the offset is like +60, not for +42.

11-20-2008, 09:38 PM	#5 (permalink)
OMGWTFBBQIMDEREK Senior Member Join Date: Nov 2006 Location: the OC Age: 20 Posts: 3,390 Derek iTrader: 3 / 100%	With an offset of roughly 42/43, you don't have a problem running widths from 7" to 8.5", which is the preferred width of about 95% of this site. So, with that being said, you don't need spacers.

11-20-2008, 10:21 PM	#6 (permalink)
yiujun Senior Member Join Date: Mar 2008 Location: Richmond, BC Age: 23 Posts: 306 iTrader: 1 / 100%	thanks guys lol i didnt realize i was being vague, i thought spacers were only needed b/c of the wrong offset.. i was also afraid of different hub bore size.. but yeah they would definitely be 7-8 width..

11-20-2008, 11:58 PM	#7 (permalink)
paolo2k2 Senior Member Join Date: Mar 2007 Location: Edmonton Posts: 1,858 JPK iTrader: 1 / 100%	wrong offset but if you think about it its only 2 mm off...