Twm SS

csxian · 02-20-2008, 03:05 PM

Hi guys, is this problem happening to TWM SS as well?
06+Civic CorSport Stainless Steel Short Shifter

I don't mean to compare both brand, just wondering if TWM has the same problem too.
Thanks

csxian · 02-20-2008, 11:00 PM

no one comments on this?

**Izzy** · 02-20-2008, 11:56 PM

Nope, haven't heard of any TWM SS owners having this problem. I know for a fact that I don't have that problem. There was a good bit of room left in between the base and the bottom of the shifter.

csxian · 02-21-2008, 04:09 AM

Do you mind to take a pic of it on gear 4 and neutral position? Thx

**Izzy** · 02-21-2008, 11:28 AM

Having it fourth means it will be pushing the stalk toward the front of the car, away from the base. I take it you mean 3rd and neutral?

02SilverSiHB · 02-25-2008, 07:53 AM

I think that is only on a few cars...I know with my comptech I don't have that issue. If I had bought a twm ss and had that happen, I'd just take a dremel to whatever it was hitting and bam...no more problems

csxian · 02-25-2008, 03:16 PM

No.. I mean, when I shift it from neutral to 3rd gear (to the front), it's totally fine. But when I want to shift to 4th gear (any gear shift to the back, just like reverse), it hits the base. It happened to 2 cars I installed.

***TWM Performance*** · 03-02-2008, 10:46 AM

Hello csxian,

We didn't get any feedback about our short shifter hitting the base when shifted in 2 - 4 or reverse..!

Hope it clears things out...!

Best Regards,

Simon
TWM Performance

***iluvmycsx*** · 03-02-2008, 12:13 PM

here is a few pics of before and after
this is the twm ss
an d i have no hitting of back peice

20civic07 · 03-03-2008, 01:27 PM

my ss will hit the base (bottom part of the shifter lever assembly) when i shift into 2nd, 4th, and 6th as well as reverse... i took some time to file down the base so i could create extra space. boy what a world of difference from feeling it hit the base (causing more force required to put into gear) to having it filed down and no resistance from the base to put it in gear....

02-20-2008, 03:05 PM	#1 (permalink)
csxian Senior Member Join Date: May 2007 Posts: 1,250 iTrader: 4 / 100%	Twm SS Hi guys, is this problem happening to TWM SS as well? 06+Civic CorSport Stainless Steel Short Shifter I don't mean to compare both brand, just wondering if TWM has the same problem too. Thanks

02-20-2008, 11:56 PM	#3 (permalink)
Izzy Supreme Pizza! Join Date: Mar 2006 Location: Azusa, CA Age: 25 Posts: 11,938 iTrader: 5 / 100%	Nope, haven't heard of any TWM SS owners having this problem. I know for a fact that I don't have that problem. There was a good bit of room left in between the base and the bottom of the shifter. __________________

02-21-2008, 11:28 AM	#5 (permalink)
Izzy Supreme Pizza! Join Date: Mar 2006 Location: Azusa, CA Age: 25 Posts: 11,938 iTrader: 5 / 100%	Having it fourth means it will be pushing the stalk toward the front of the car, away from the base. I take it you mean 3rd and neutral? __________________

03-02-2008, 12:13 PM	#9 (permalink)
*iluvmycsx* Skunk2 Airlines Member#63 Join Date: Dec 2005 Location: Regina - The City That Rhymes with Fun Age: 31 Posts: 21,836 Mike/Mikey but not Michael!!!! iTrader: 7 / 100%	here is a few pics of before and after this is the twm ss an d i have no hitting of back peice __________________ My Ride

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-20-2008, 11:00 PM	#2 (permalink)
csxian Senior Member Join Date: May 2007 Posts: 1,250 iTrader: 4 / 100%	no one comments on this?

02-21-2008, 04:09 AM	#4 (permalink)
csxian Senior Member Join Date: May 2007 Posts: 1,250 iTrader: 4 / 100%	Do you mind to take a pic of it on gear 4 and neutral position? Thx

02-25-2008, 07:53 AM	#6 (permalink)
02SilverSiHB Senior Member Join Date: Oct 2005 Location: San Antonio, Texas Age: 31 Posts: 1,209 iTrader: 4 / 100%	I think that is only on a few cars...I know with my comptech I don't have that issue. If I had bought a twm ss and had that happen, I'd just take a dremel to whatever it was hitting and bam...no more problems

02-25-2008, 03:16 PM	#7 (permalink)
csxian Senior Member Join Date: May 2007 Posts: 1,250 iTrader: 4 / 100%	No.. I mean, when I shift it from neutral to 3rd gear (to the front), it's totally fine. But when I want to shift to 4th gear (any gear shift to the back, just like reverse), it hits the base. It happened to 2 cars I installed.

03-02-2008, 10:46 AM	#8 (permalink)
*TWM Performance* 8thcivic Sponsor Join Date: Oct 2005 Location: Montreal Age: 31 Posts: 435 iTrader: 24 / 100%	Hello csxian, We didn't get any feedback about our short shifter hitting the base when shifted in 2 - 4 or reverse..! Hope it clears things out...! Best Regards, Simon TWM Performance

03-03-2008, 01:27 PM	#10 (permalink)
20civic07 Senior Member Join Date: Mar 2007 Posts: 1,307 iTrader: 7 / 100%	my ss will hit the base (bottom part of the shifter lever assembly) when i shift into 2nd, 4th, and 6th as well as reverse... i took some time to file down the base so i could create extra space. boy what a world of difference from feeling it hit the base (causing more force required to put into gear) to having it filed down and no resistance from the base to put it in gear....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Twm Ss	OweNsi	Bolt-Ons And All-Motor	2	12-31-2007 08:58 AM
TWM SS vs. Comptech SS vs. All other SS	Si Speed 317	Bolt-Ons And All-Motor	63	11-28-2007 07:03 PM
Twm Ss	mako8	Bolt-Ons And All-Motor	6	06-10-2007 10:16 AM
TWM vs. Comptech	forty.water	Inside and Out	9	11-24-2006 10:16 AM
Comptech or TWM SS???	spocheld	Bolt-Ons And All-Motor	10	10-11-2006 10:08 PM