Rear Camber Kit - Page 5

rames · 12-04-2007, 01:07 AM

i was looking around for camber kits and they don't come cheap! what is the average price for a good kit????(what is a good Kit?)

***Zeuceone*** · 12-04-2007, 01:11 AM

All the kits out are good. Talk to me on aim and ill give you some info.

J_Bone · 12-08-2007, 08:53 PM

Quote:

Originally Posted by Zeuceone

All the kits out are good. Talk to me on aim and ill give you some info.

Share with us all???

vince1128 · 01-01-2008, 04:05 PM

i just ordered a skunk2 kit for 229. pretty good deal, best ive seen. very informative post. im a pretty big noob and gonna try to do this myself. i have access to a full shop which should help. im just a little nervous with camber being different, im installing comptech springs with the kit and then going to get it aligned. is this ok, what the best setting for good tire life and performance?

jeremy0203 · 01-01-2008, 04:36 PM

Quote:

Originally Posted by vince1128

i just ordered a skunk2 kit for 229. pretty good deal, best ive seen. very informative post. im a pretty big noob and gonna try to do this myself. i have access to a full shop which should help. im just a little nervous with camber being different, im installing comptech springs with the kit and then going to get it aligned. is this ok, what the best setting for good tire life and performance?

good choice im going to be buying come comptech springs and eer skunk or scp camber kit, where did or are you gettinyour springs and how much

vince1128 · 01-01-2008, 08:38 PM

through excellerate performance here on the forum, 135 shipped, smokin deal. the camber kit is the cheapest you'll find it through SPT 704 305 0323

Coop · 01-01-2008, 10:59 PM

I have been using the Skunk2 kit for awhile and havent had any probs. Excellent product.

***I<3MyHonda*** · 01-08-2008, 03:02 PM

need help onhow to put on the snap ring...anyone out there?!

08CivicSiGG · 02-01-2008, 11:18 AM

Alignment after drop...is it better to wait about a week and let springs settle before getting an alignment?

gonna do springs and rear camber install at same time.

Mookie469 · 03-09-2008, 11:35 AM

Does anybody know what would be the best setting for the camber after the drop and the alligment?

+/- What?

I would like my setting for thread life on the tires. I drive 110 miles comunting everyday, and right now my tires are paying back for it. The car already has a 1.5 inch drop by Tein S springs. I will appreciate the suggestions.
Thanks in advance.

SoCal07Si · 03-14-2008, 04:12 PM

-1 would prolly be best for ur commute...i think

Piotrush · 03-15-2008, 07:36 PM

good thread - I'm going to get the camber kit when I get the HFP suspension. I heard oem specs are F:0*, R:-2*; zero toe all around. I'm going to try to get it F:-1.75*, :-1.25*; zero toe all around. I just hope I don't have any rubbing issues with the 245 wide Potenzas

Mookie469 · 03-18-2008, 09:50 PM

I guess i can give it a try to -1.4 and zero toe. Does anybody has this sety up?

vince1128 · 03-22-2008, 08:13 PM

stuck mine on today, stopped bein lazy and did it. need an alignment, probably will go monday.extremely easy 3 bolts on each side and your done

vince1128 · 03-23-2008, 12:21 AM

also since it was lifted for about an hour my front springs still havent settled back down to what they normally sit at, but the back is all ready lower. so i think it may have lowered me in the rear a little bit. is that possible? the hole car was jack up so i cant understand. hopefully by morning the front will have settled down and ill compare it to the back again

justphuta · 05-06-2008, 12:46 AM

awesome thread

need help now..i put on some MEGAN springs on my si sedan. (1.5 drop)
pretty nice ride. now its time to put on my skunk2 rear cambers.

on a really low budget and would rather do set the alignment myself.
anyone have suggestions on what settings i should set my cambers??
MEGAN springs 1.5 drop...

btw. . .anyone else with megan springs??? seems like im the only one...lol

ortivt6 · 05-06-2008, 12:50 AM

mmm its going to be hard for u to set the camber arm at the right number without taking it to a professional... u can try but u wont know ho much negative camber u will have till u take it to a shop... plus when u intalled spring u need an alingment no matter what...

its very recommended... just installed the camber arm... and then save up for the alignment...

dannyd86 · 05-12-2008, 06:03 PM

I just got the Skunk2 camber arms. I also purchased SPC front camber bolts.
I'm going to be installing springs (Sportlines) at the same time.

I was skimming through this thread and read that the front camber bolts aren't necessary. Why is that?

ortivt6 · 05-12-2008, 06:05 PM

cuz the front ones dont need adjustment once u installed the sportline... after u get an alignment u be fine... dropping on sportlines did not affect my camber in the front...

05-06-2008, 12:46 AM	#97 (permalink)
justphuta Junior Member Join Date: Apr 2008 Posts: 9 iTrader: 0 / 0%	Need help with Camber Settings. Megan Springs awesome thread need help now..i put on some MEGAN springs on my si sedan. (1.5 drop) pretty nice ride. now its time to put on my skunk2 rear cambers. on a really low budget and would rather do set the alignment myself. anyone have suggestions on what settings i should set my cambers?? MEGAN springs 1.5 drop... btw. . .anyone else with megan springs??? seems like im the only one...lol

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/suspension/32040-rear-camber-kit.html
Posted By	For	Type	Date
2006 CIVIC SEDAN how to Install Camber Kit - Honda Forum / Acura Forum - SuperHonda.com	This thread	Refback	02-25-2008 08:03 AM
2006 CIVIC SEDAN how to Install Camber Kit - Honda Acura Forum	This thread	Refback	12-30-2007 12:12 AM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
s tech tein spring, need a rear camber kit?	ronjancivicsi	Suspension and Brakes	4	04-06-2007 10:25 PM
WTB: Rear camber kit for 07 Si	TRY2HNG	Wanted Forum	0	03-31-2007 08:27 PM
Megan H-Brace and lower rear brace Review	604_ep3	Suspension and Brakes	38	03-21-2007 01:32 AM
Comptech vs SPC camber kit....need pics	06Fg2	Suspension and Brakes	8	12-07-2006 10:18 PM
Camber Kit Install	baddceo	Civic SI	4	11-18-2006 06:39 PM

11-24-2007, 12:03 PM	#81 (permalink)
ortivt6 Senior Member Join Date: May 2007 Location: FL Age: 26 Posts: 2,348 Ant iTrader: 10 / 100%

12-04-2007, 01:07 AM	#82 (permalink)
rames Member Join Date: Sep 2007 Location: Oakland, CA Posts: 67 James iTrader: 0 / 0%	i was looking around for camber kits and they don't come cheap! what is the average price for a good kit????(what is a good Kit?)

01-01-2008, 04:05 PM	#85 (permalink)
vince1128 Senior Member Join Date: Dec 2007 Location: Concord, NC Age: 17 Posts: 395 Vince iTrader: 0 / 0%	i just ordered a skunk2 kit for 229. pretty good deal, best ive seen. very informative post. im a pretty big noob and gonna try to do this myself. i have access to a full shop which should help. im just a little nervous with camber being different, im installing comptech springs with the kit and then going to get it aligned. is this ok, what the best setting for good tire life and performance?

01-01-2008, 08:38 PM	#87 (permalink)
vince1128 Senior Member Join Date: Dec 2007 Location: Concord, NC Age: 17 Posts: 395 Vince iTrader: 0 / 0%	through excellerate performance here on the forum, 135 shipped, smokin deal. the camber kit is the cheapest you'll find it through SPT 704 305 0323

01-01-2008, 10:59 PM	#88 (permalink)
Coop Senior Member Join Date: Nov 2006 Location: TX Posts: 1,752 Coop iTrader: 5 / 100%	I have been using the Skunk2 kit for awhile and havent had any probs. Excellent product.

01-08-2008, 03:02 PM	#89 (permalink)
*I<3MyHonda* King Starscream Join Date: Jan 2008 Location: St.Joe, MI Age: 20 Posts: 10,650 John iTrader: 0 / 0%	need help onhow to put on the snap ring...anyone out there?!

02-01-2008, 11:18 AM	#90 (permalink)
08CivicSiGG Junior Member Join Date: Jan 2008 Location: Iowa Posts: 29 iTrader: 0 / 0%	Alignment after drop...is it better to wait about a week and let springs settle before getting an alignment? gonna do springs and rear camber install at same time.

03-09-2008, 11:35 AM	#91 (permalink)
Mookie469 Senior Member Join Date: Oct 2006 Location: Elizabeth City, NC Age: 29 Posts: 268 Ed iTrader: 1 / 100%	Does anybody know what would be the best setting for the camber after the drop and the alligment? +/- What? I would like my setting for thread life on the tires. I drive 110 miles comunting everyday, and right now my tires are paying back for it. The car already has a 1.5 inch drop by Tein S springs. I will appreciate the suggestions. Thanks in advance.

03-14-2008, 04:12 PM	#92 (permalink)
SoCal07Si Senior Member Join Date: Jan 2008 Location: Whitter, So Cali Posts: 2,640 iTrader: 1 / 100%	-1 would prolly be best for ur commute...i think

03-15-2008, 07:36 PM	#93 (permalink)
Piotrush Senior Member Join Date: Jul 2007 Location: Stamford CT Age: 25 Posts: 124 Peter iTrader: 0 / 0%	good thread - I'm going to get the camber kit when I get the HFP suspension. I heard oem specs are F:0, R:-2; zero toe all around. I'm going to try to get it F:-1.75, :-1.25; zero toe all around. I just hope I don't have any rubbing issues with the 245 wide Potenzas

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

03-18-2008, 09:50 PM	#94 (permalink)
Mookie469 Senior Member Join Date: Oct 2006 Location: Elizabeth City, NC Age: 29 Posts: 268 Ed iTrader: 1 / 100%	I guess i can give it a try to -1.4 and zero toe. Does anybody has this sety up?

03-22-2008, 08:13 PM	#95 (permalink)
vince1128 Senior Member Join Date: Dec 2007 Location: Concord, NC Age: 17 Posts: 395 Vince iTrader: 0 / 0%	stuck mine on today, stopped bein lazy and did it. need an alignment, probably will go monday.extremely easy 3 bolts on each side and your done

03-23-2008, 12:21 AM	#96 (permalink)
vince1128 Senior Member Join Date: Dec 2007 Location: Concord, NC Age: 17 Posts: 395 Vince iTrader: 0 / 0%	also since it was lifted for about an hour my front springs still havent settled back down to what they normally sit at, but the back is all ready lower. so i think it may have lowered me in the rear a little bit. is that possible? the hole car was jack up so i cant understand. hopefully by morning the front will have settled down and ill compare it to the back again

05-06-2008, 12:50 AM	#98 (permalink)
ortivt6 Senior Member Join Date: May 2007 Location: FL Age: 26 Posts: 2,348 Ant iTrader: 10 / 100%	mmm its going to be hard for u to set the camber arm at the right number without taking it to a professional... u can try but u wont know ho much negative camber u will have till u take it to a shop... plus when u intalled spring u need an alingment no matter what... its very recommended... just installed the camber arm... and then save up for the alignment...

05-12-2008, 06:03 PM	#99 (permalink)
dannyd86 Member Join Date: Feb 2008 Location: Homestead, FL Age: 21 Posts: 33 Danny iTrader: 0 / 0%	I just got the Skunk2 camber arms. I also purchased SPC front camber bolts. I'm going to be installing springs (Sportlines) at the same time. I was skimming through this thread and read that the front camber bolts aren't necessary. Why is that?

05-12-2008, 06:05 PM	#100 (permalink)
ortivt6 Senior Member Join Date: May 2007 Location: FL Age: 26 Posts: 2,348 Ant iTrader: 10 / 100%	cuz the front ones dont need adjustment once u installed the sportline... after u get an alignment u be fine... dropping on sportlines did not affect my camber in the front...