Eibach Pro-Kit Drop????

llckll · 11-07-2007, 05:48 PM

I'm confused.

1/2 the places I look online say the drop it 1.2" in the front and 1.0" in the rear.

others are saying that the front is 1.0" and the rear is 1.2"

Which is correct??????

I think 1.2" in front is correct because it looks a little higher at stock...

http://www.wesellcarparts.com/store/...idproduct=5055

http://www.tirerack.com/suspension/S...lar=&brand=all

are the 06 & 07 models different springs?

llckll · 11-07-2007, 07:16 PM

I guess the next best thing is to trust www.eibach.com themselves.

Front 1.2"
Rear 1.0"

08smokeSi · 11-07-2007, 09:50 PM

I actually called them today and they confirmed it's 1'' in the front and 1/2'' in the rear, so the car sits more balanced...I just ordered the set.

***rippars*** · 11-07-2007, 09:56 PM

its 1'' in the front and 1.2'' in the rear. the rear still sits higher than the front by .5-.8 (dont remember the exact difference but i do know it for a fact cause i measured it!)

llckll · 11-08-2007, 02:05 PM

I hear it's opposite for the sedan which I have.

Should of clarified earlier.

11-07-2007, 05:48 PM	#1 (permalink)
llckll Senior Member Join Date: Jun 2007 Posts: 401 iTrader: 0 / 0%	Eibach Pro-Kit Drop???? I'm confused. 1/2 the places I look online say the drop it 1.2" in the front and 1.0" in the rear. others are saying that the front is 1.0" and the rear is 1.2" Which is correct?????? I think 1.2" in front is correct because it looks a little higher at stock... http://www.wesellcarparts.com/store/...idproduct=5055 http://www.tirerack.com/suspension/S...lar=&brand=all are the 06 & 07 models different springs?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Fitment Recipe - wheel offsets that work	FigiSi06	Wheel And Tire Upgrades	1384	11-18-2008 12:47 PM
Something you should consider before going AJP: A true story about liars	JeShUa	Forced Induction And Nitrous	373	02-21-2008 02:27 PM
Eibach Pro Kit Install Help in Phoenix	Tigger1	Suspension and Brakes	3	06-12-2006 12:20 PM
Eibach pro kit pictures	pigman	Garage	11	05-13-2006 11:54 AM

11-07-2007, 07:16 PM	#2 (permalink)
llckll Senior Member Join Date: Jun 2007 Posts: 401 iTrader: 0 / 0%	I guess the next best thing is to trust www.eibach.com themselves. Front 1.2" Rear 1.0"

11-07-2007, 09:50 PM	#3 (permalink)
08smokeSi Member Join Date: Nov 2007 Location: Frisco, TX Posts: 86 iTrader: 0 / 0%	I actually called them today and they confirmed it's 1'' in the front and 1/2'' in the rear, so the car sits more balanced...I just ordered the set.

11-08-2007, 02:05 PM	#5 (permalink)
llckll Senior Member Join Date: Jun 2007 Posts: 401 iTrader: 0 / 0%	I hear it's opposite for the sedan which I have. Should of clarified earlier.