Where to buy Axxis Ultimates

jpv027 · 09-06-2007, 06:25 PM

Where can I buy Axxis Ultimates for 06 Si? I've looked at a bunch of places and they don't have them for our car. People on this site said they have them, did they have to buy them for a different model? Thanks

8yourv8 · 09-06-2007, 06:46 PM

i have some the part number is AX-109.07640(FR) and AX-109.05370(RR) $115 shipped for front and rear pm me if interested

Jay Kincannon · 09-07-2007, 01:26 AM

Try Brake Designs, Inc. (BDI) @ 714-626-8818. I paid $44 for 109.07640 (front) and $37 for 109.053370 (rear) not including shipping. I also purchased rotors with for front and rear which were slotted and vented (front and rear) for $128 not including shipping.

kkim388 · 09-08-2007, 06:00 PM

I buy mine from here...

http://www.honda-tech.com/zerothread/1411597

firstsi · 09-08-2007, 06:21 PM

look up rotorworks on ebay
i think they had them for 88 bucks plus shipping

CZ-75 · 09-10-2007, 03:36 PM

Unless something has changed quite a bit, the Si needs FMSI D829 sized brake pads, not D764. Sometimes these cross-reference, but I wouldn't chance it unless I knew for certain.

http://www.stoptech.com/tech_info/faq_wrxcalipers.shtml

http://www.performancefriction.com/p...ref_aftmkt.htm

Si_Jeff · 09-12-2007, 01:36 AM

ebay has them for 99 + shipping. the front are 109.08290. rear 109.05370

jpv027 · 10-09-2007, 12:34 AM

Thanks Jay Kincannon for letting me know about Brake Designs. And thanks CZ-75 for letting me know the correct size. I finally got the chance to install them and I am very Happy with results, I was surprised with how smooth they felt under hard braking. Does the bite get stronger as they break-in? Thanks

09-06-2007, 06:25 PM	#1 (permalink)
jpv027 Senior Member Join Date: Jul 2006 Location: NOVA/Baltimore Age: 22 Posts: 208 iTrader: 1 / 100%	Where to buy Axxis Ultimates Where can I buy Axxis Ultimates for 06 Si? I've looked at a bunch of places and they don't have them for our car. People on this site said they have them, did they have to buy them for a different model? Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dumb Laws	C2i0v0i1c	Water Cooler	58	10-03-2008 10:27 AM
Don't like international copyright law? Buy your own country!	letsgoflyers81	Water Cooler	12	11-19-2007 04:54 PM
Help. Should I buy my fiance a christmas present?	bikinpunk	Water Cooler	3	12-24-2006 08:44 PM
What to buy???? si....r1?	groundcontrol_06	Garage	36	06-30-2006 09:40 AM
so if you had to buy a truck.....	tehLOLbbq	Garage	12	08-03-2005 03:17 PM

09-06-2007, 06:46 PM	#2 (permalink)
8yourv8 Senior Member Join Date: Jul 2007 Location: Peoria,Arizona Posts: 661 iTrader: 5 / 100%	i have some the part number is AX-109.07640(FR) and AX-109.05370(RR) $115 shipped for front and rear pm me if interested

09-07-2007, 01:26 AM	#3 (permalink)
Jay Kincannon Senior Member Join Date: Mar 2007 Posts: 934 iTrader: 2 / 100%	Try Brake Designs, Inc. (BDI) @ 714-626-8818. I paid $44 for 109.07640 (front) and $37 for 109.053370 (rear) not including shipping. I also purchased rotors with for front and rear which were slotted and vented (front and rear) for $128 not including shipping.

09-08-2007, 06:00 PM	#4 (permalink)
kkim388 Senior Member Join Date: Mar 2007 Location: kauai, hawaii Age: 56 Posts: 108 iTrader: 0 / 0%	I buy mine from here... http://www.honda-tech.com/zerothread/1411597

09-08-2007, 06:21 PM	#5 (permalink)
firstsi Senior Member Join Date: Sep 2006 Location: shooting womprats from 3 parseks Posts: 4,263 iTrader: 0 / 0%	look up rotorworks on ebay i think they had them for 88 bucks plus shipping

09-10-2007, 03:36 PM	#6 (permalink)
CZ-75 Senior Member Join Date: Aug 2006 Location: Tri-state Posts: 1,248 Brian iTrader: 0 / 0%	Unless something has changed quite a bit, the Si needs FMSI D829 sized brake pads, not D764. Sometimes these cross-reference, but I wouldn't chance it unless I knew for certain. http://www.stoptech.com/tech_info/faq_wrxcalipers.shtml http://www.performancefriction.com/p...ref_aftmkt.htm

09-12-2007, 01:36 AM	#7 (permalink)
Si_Jeff Senior Member Join Date: Feb 2007 Location: NY Posts: 595 iTrader: 2 / 100%	ebay has them for 99 + shipping. the front are 109.08290. rear 109.05370

10-09-2007, 12:34 AM	#8 (permalink)
jpv027 Senior Member Join Date: Jul 2006 Location: NOVA/Baltimore Age: 22 Posts: 208 iTrader: 1 / 100%	Thanks Jay Kincannon for letting me know about Brake Designs. And thanks CZ-75 for letting me know the correct size. I finally got the chance to install them and I am very Happy with results, I was surprised with how smooth they felt under hard braking. Does the bite get stronger as they break-in? Thanks