06+ Civic Si 2/4dr Spring Rates and Drop Guide - Page 6

forwallblakmail · 03-12-2008, 11:50 PM

Quote:

Originally Posted by pgFA

Tanabe have the application for the DF210 springs for FG2/FA5

FG2: ////0.9 / 1.0//// - ////3.4 / 4.1////
FA5: ////1.3 / 1.1//// - ////3.4 / 4.1////

Est 10%-15% spring rate raise.

OK, this may be an incredibly dumb assumsion, and blatenlty odvious, i saw the Tanabe springs on Ebay, and they have the same part# for the FG2 and FA5, so wouldent that mean that there is no differnece between the coupe and sedan spring if the spring rate is the same?
just to be sure before i buy them...

pgFA · 03-13-2008, 12:24 AM

Quote:

Originally Posted by forwallblakmail

OK, this may be an incredibly dumb assumsion, and blatenlty odvious, i saw the Tanabe springs on Ebay, and they have the same part# for the FG2 and FA5, so wouldent that mean that there is no differnece between the coupe and sedan spring if the spring rate is the same?
just to be sure before i buy them...

Not really sure about that since for example the eibach prokit, it has the same part number for FG2 and FA5 but has a different drop.

BRSi · 03-13-2008, 11:09 PM

Interested on the Tanabe GF210s or H Techs ... problem is I have yet to see a picture of a sedan with H techs and I went to the Tanabe website they actually have pictures of the sedan lowered with both DF210 and GF210, but to me they look the same and just a little lower on the front???

With GF210 http://www.tanabe-usa.com/suspension/files/487_img1.jpg and with DF210 http://www.tanabe-usa.com/suspension/files/486_img1.jpg

SoCal07Si · 03-13-2008, 11:18 PM

part #s are t same for Teins too. Drop depends on your weight...i/e the FA will be lower

stargate69 · 03-20-2008, 01:02 PM

Quote:

Originally Posted by skandal57

does anyone know any numbers on the HFP kit? i havent beem able to find out anything

bump for this thread

insole23 · 03-20-2008, 03:14 PM

What is the comparison to the stock spring compared to the hfp suspension kit? ride? low?

Also if you have a sedan how low did you drop your car?

BRSi · 03-21-2008, 12:22 PM

Funny thing is I received a reply from tanabe saying the spring rates are different from the DF and GF, but the website says the same and they didn't even tell me the difference in spring rates from the GF/DF ... now I am really confused.

black07coupe · 04-04-2008, 12:05 AM

i don't really understand the lbs specification and what it means. which springs would be good for my fg1 if i want a slight drop, not slam, and i want it a bit stiffer than stock? i'm looking for like a 1.3 drop like the s-techs or something like that. thanks in advance.

BRSi · 04-07-2008, 01:03 PM

Tanabe never replied again, so I'll probably go with Eibach.

SST760 · 04-21-2008, 02:40 PM

great info

justphuta · 05-10-2008, 07:32 PM

sup ya'll

no one here mentioned MEGAN springs 1.5 drop =/

im riding on my MEGAN springs...and i cant complain....
anyone else out there with megans??? or am i riding solo??

ReddemonSI · 05-12-2008, 05:43 PM

i was wondering who has a problem with rubbing, and if you do could you say how much of a drop and what set up you have, because i am really thinking about getting suspension in the near futur and want to prevent myself from having any problems. thanks

vtecnumskull · 06-05-2008, 12:37 PM

Does anyone have the buddyclub n+ on the sedan si?

pgFA · 06-05-2008, 03:55 PM

Quote:

Originally Posted by vtecnumskull

Does anyone have the buddyclub n+ on the sedan si?

EntropyXIII has him on his FA5. Here is one of his thread. EntropyXIII...just some quick pics

brado · 06-18-2008, 06:50 PM

I looked at the HFP springs and I know they drop 1inch but there is no spring rates listed. Do they have the same spring rates as our stock suspension?

Jayro · 06-22-2008, 08:14 PM

I'd like to see pics of anyones car with the Honda HFP Springs on. Can anyone help?

colomstyle · 06-27-2008, 06:56 PM

u65u65uu656

FlatlineSi28 · 07-06-2008, 07:58 PM

Threecamels · 07-08-2008, 09:06 AM

I just put the HFP on and I thought that the springs would be firmer that they are. Compared to the Si, I'd like to know what their spring rate is?

***ItzGoatee*** · 07-24-2008, 06:40 AM

so the springs that will give a good drop of 1.5" and still have good stiff feeling would be tein s-techs?

03-13-2008, 11:09 PM	#103 (permalink)
BRSi Senior Member Join Date: Jan 2008 Location: SP Posts: 199 iTrader: 0 / 0%	Interested on the Tanabe GF210s or H Techs ... problem is I have yet to see a picture of a sedan with H techs and I went to the Tanabe website they actually have pictures of the sedan lowered with both DF210 and GF210, but to me they look the same and just a little lower on the front??? With GF210 http://www.tanabe-usa.com/suspension/files/487_img1.jpg and with DF210 http://www.tanabe-usa.com/suspension/files/486_img1.jpg Last edited by BRSi; 03-13-2008 at 11:30 PM.

07-06-2008, 07:58 PM	#118 (permalink)
FlatlineSi28 Senior Member Join Date: Nov 2007 Location: New Jersey Age: 19 Posts: 224 Matt iTrader: 0 / 0%	NICE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Megan racing lowering spring	BattleEndless	BattleEndless Performance	12	07-14-2008 12:26 PM

03-13-2008, 11:18 PM	#104 (permalink)
SoCal07Si Senior Member Join Date: Jan 2008 Location: Whitter, So Cali Age: 21 Posts: 12,174 Just call me Daddy iTrader: 1 / 100%	part #s are t same for Teins too. Drop depends on your weight...i/e the FA will be lower

03-20-2008, 03:14 PM	#106 (permalink)
insole23 Senior Member Join Date: Feb 2008 Posts: 789 iTrader: 0 / 0%	What is the comparison to the stock spring compared to the hfp suspension kit? ride? low? Also if you have a sedan how low did you drop your car?

03-21-2008, 12:22 PM	#107 (permalink)
BRSi Senior Member Join Date: Jan 2008 Location: SP Posts: 199 iTrader: 0 / 0%	Funny thing is I received a reply from tanabe saying the spring rates are different from the DF and GF, but the website says the same and they didn't even tell me the difference in spring rates from the GF/DF ... now I am really confused.

04-04-2008, 12:05 AM	#108 (permalink)
black07coupe Senior Member Join Date: Jul 2007 Location: BOSTON Posts: 1,403 Mike iTrader: 0 / 0%	i don't really understand the lbs specification and what it means. which springs would be good for my fg1 if i want a slight drop, not slam, and i want it a bit stiffer than stock? i'm looking for like a 1.3 drop like the s-techs or something like that. thanks in advance.

04-07-2008, 01:03 PM	#109 (permalink)
BRSi Senior Member Join Date: Jan 2008 Location: SP Posts: 199 iTrader: 0 / 0%	Tanabe never replied again, so I'll probably go with Eibach.

04-21-2008, 02:40 PM	#110 (permalink)
SST760 Member Join Date: Mar 2008 Location: San Diego,CA Posts: 44 iTrader: 1 / 100%	great info

05-10-2008, 07:32 PM	#111 (permalink)
justphuta Junior Member Join Date: Apr 2008 Posts: 9 iTrader: 0 / 0%	sup ya'll no one here mentioned MEGAN springs 1.5 drop =/ im riding on my MEGAN springs...and i cant complain.... anyone else out there with megans??? or am i riding solo??

05-12-2008, 05:43 PM	#112 (permalink)
ReddemonSI Senior Member Join Date: Sep 2007 Location: San Francisco Posts: 140 iTrader: 0 / 0%	i was wondering who has a problem with rubbing, and if you do could you say how much of a drop and what set up you have, because i am really thinking about getting suspension in the near futur and want to prevent myself from having any problems. thanks

06-05-2008, 12:37 PM	#113 (permalink)
vtecnumskull Member Join Date: May 2008 Location: mesa az Posts: 33 adam iTrader: 0 / 0%	Does anyone have the buddyclub n+ on the sedan si?

06-18-2008, 06:50 PM	#115 (permalink)
brado Member Join Date: May 2008 Posts: 36 iTrader: 0 / 0%	I looked at the HFP springs and I know they drop 1inch but there is no spring rates listed. Do they have the same spring rates as our stock suspension?

06-22-2008, 08:14 PM	#116 (permalink)
Jayro Junior Member Join Date: Jun 2008 Location: Florida/Arizona Posts: 11 James R iTrader: 0 / 0%	I'd like to see pics of anyones car with the Honda HFP Springs on. Can anyone help?

06-27-2008, 06:56 PM	#117 (permalink)
colomstyle Member Join Date: Dec 2007 Location: south florida Posts: 41 Bryan iTrader: 0 / 0%	u65u65uu656

07-08-2008, 09:06 AM	#119 (permalink)
Threecamels Member Join Date: Dec 2007 Location: N.E. Ohio Posts: 34 Puddin Tame iTrader: 0 / 0%	I just put the HFP on and I thought that the springs would be firmer that they are. Compared to the Si, I'd like to know what their spring rate is?

07-24-2008, 06:40 AM	#120 (permalink)
*ItzGoatee* More Rice Please : ] Join Date: Oct 2007 Location: Marietta, Ga ~ 75%Korean & 25%Japanese Posts: 798 Billy, Seung Hyun, Kaoru : ] iTrader: 3 / 100%	so the springs that will give a good drop of 1.5" and still have good stiff feeling would be tein s-techs?