Suspensions!!! - Page 8

KONIMAN · 03-08-2008, 03:44 PM

The prelude does not take a insert(inserts are mainly used for strut cars) were the strut is cut open, all the guts are taken out and the insert is slid inside and either held in from the bottom with a bolt or there is a sleeve welded to the top of the oe body and threaded for a gland nut to hold everything in.
The prelude is a shock car, front is a 8041-1232sport and the rear is a 8041-1155 sport which has external rebound adjustment.
The insert is what will be used on the front of the 06+civic

***Sirbelch*** · 03-08-2008, 06:04 PM

I guess I read it wrong. Ohhhhh well. However, when Koni does come out with the sports, they will be a full OTS and not an insert.

***Highrev1*** · 03-08-2008, 06:21 PM

Koniman now an insert for the OTS konis for the FG...I thought that you guys were gonna do a whole housing and that was the delay as there are 5 or 6 different housings for this car throughout the world???

GlxyGry06Si · 03-08-2008, 06:47 PM

Quote:

Originally Posted by Highrev1

Koniman now an insert for the OTS konis for the FG...I thought that you guys were gonna do a whole housing and that was the delay as there are 5 or 6 different housings for this car throughout the world???

i like the rough ride. what would you reccomend. i seen megan and buddy club have something for the car? megan is good right?

***Highrev1*** · 03-08-2008, 06:53 PM

As of right now I an not a "fan" of any pre-built coilovers...Read why in the first post...

GlxyGry06Si · 03-08-2008, 06:55 PM

Quote:

Originally Posted by Highrev1

As of right now I an not a "fan" of any pre-built coilovers...Read why in the first post...

i did but this is going to be for looks. she will never see the track. all inclusive kits are a lot easier for me.

***Highrev1*** · 03-08-2008, 07:02 PM

If you wait a couple weeks there will be a full test on almost all the setups for this car..then you can make a better decision...

GlxyGry06Si · 03-08-2008, 07:03 PM

Quote:

Originally Posted by Highrev1

If you wait a couple weeks there will be a full test on almost all the setups for this car..then you can make a better decision...

thanks man. i look forward to that.

***Sirbelch*** · 03-08-2008, 07:53 PM

Quote:

Originally Posted by KONIMAN

The prelude does not take a insert(inserts are mainly used for strut cars) were the strut is cut open, all the guts are taken out and the insert is slid inside and either held in from the bottom with a bolt or there is a sleeve welded to the top of the oe body and threaded for a gland nut to hold everything in.
The prelude is a shock car, front is a 8041-1232sport and the rear is a 8041-1155 sport which has external rebound adjustment.
The insert is what will be used on the front of the 06+civic

Quote:

Originally Posted by Sirbelch

I guess I read it wrong. Ohhhhh well. However, when Koni does come out with the sports, they will be a full OTS and not an insert.

Quote:

Originally Posted by Highrev1

Koniman now an insert for the OTS konis for the FG...I thought that you guys were gonna do a whole housing and that was the delay as there are 5 or 6 different housings for this car throughout the world???

Koniman, I didn't even put that together, Koni Man. Im not a good readerer of things sometimes. That makes me

now doesn't it. I just told a man that works for a company what they were making, again,

to the 8th

KONIMAN · 03-09-2008, 11:14 AM

Quote:

Originally Posted by Highrev1

Koniman now an insert for the OTS konis for the FG...I thought that you guys were gonna do a whole housing and that was the delay as there are 5 or 6 different housings for this car throughout the world???

That is the delay for production.

***Highrev1*** · 03-09-2008, 11:33 AM

Had em 2 years ago on my SI

These are the D/A's...a single adjustable option will be out shortly

KONIMAN · 03-09-2008, 11:48 AM

ha, i think i built those lol.... They started out as a mustang rear

***Highrev1*** · 03-09-2008, 11:50 AM

Yeah, thats the mustang donor setup

We have gotten a couple of sets of those already. But obviously only D/A. We did just find an OTS single adjustable koni option for the front and rear. I just gotta test them and then they will be out.

Get on Im's

I will show YOU the shock dynos of them, since you can just get them from work anyway

KONIMAN · 03-09-2008, 11:55 AM

im's?

Bills330i · 03-10-2008, 09:44 PM

Greg,

Read all 8 pages. Still not sure about settings. What are your recomended camber settings for Track Days. I have an 08 Si sedan. Also recommended front camber bolts and rear adjuster.

Watkins Glen April 29th

***Highrev1*** · 03-10-2008, 09:51 PM

mmmmmmmmmm...The Glenn I love it there...For a track day setup, things change. what tires will you be running...Whos that with PDA? I want to go..

I was up there and got to walk the track that was cool as shit..

meeks · 03-10-2008, 11:43 PM

im going to wait for the konis!! rawr. :)

Bills330i · 03-12-2008, 05:56 PM

Quote:

Originally Posted by Highrev1

mmmmmmmmmm...The Glenn I love it there...For a track day setup, things change. what tires will you be running...Whos that with PDA? I want to go..

I was up there and got to walk the track that was cool as shit..

The club is SCDA. Welcome to SCDA - The Sports Car Driving Association Will be running the stock Michilen All Seasons. I want to change the front camber so i don't kill the front tire shoulders and also reduce the understeer.

Thanks!!

***Highrev1*** · 03-12-2008, 06:29 PM

Eitherway the limiting factor will be those stock Michilen's. I killed those in one day

The scalloped and were ruined

I would still stick to say -1.75 front and -1 rear 0 toe all around. Those tires don't like too much heat..:

Piotrush · 03-12-2008, 11:01 PM

Quote:

Originally Posted by Bills330i

The club is SCDA. Welcome to SCDA - The Sports Car Driving Association Will be running the stock Michilen All Seasons. I want to change the front camber so i don't kill the front tire shoulders and also reduce the understeer.

Thanks!!

Same, I chewed up the outer edges on my front PS2s in 1 auto-x event. Camber mods will definitely be made before the next event.

03-08-2008, 03:44 PM	#141 (permalink)
KONIMAN Member Join Date: Mar 2008 Location: Hebron, KY. Posts: 52 jason iTrader: 0 / 0%	lude The prelude does not take a insert(inserts are mainly used for strut cars) were the strut is cut open, all the guts are taken out and the insert is slid inside and either held in from the bottom with a bolt or there is a sleeve welded to the top of the oe body and threaded for a gland nut to hold everything in. The prelude is a shock car, front is a 8041-1232sport and the rear is a 8041-1155 sport which has external rebound adjustment. The insert is what will be used on the front of the 06+civic

03-08-2008, 06:04 PM	#142 (permalink)
*Sirbelch* Louder than 4 F404-GE-400 Join Date: Jan 2007 Location: Vacaville CA Age: 26 Posts: 4,047 Paul iTrader: 1 / 100%	I guess I read it wrong. Ohhhhh well. However, when Koni does come out with the sports, they will be a full OTS and not an insert. __________________ Waking up dead inside of my head will never never do, there is no med, no medicine to take. I've had a chance to be insane, asylum from the falling rain. I’ve had a chance to break.

03-09-2008, 11:48 AM	#152 (permalink)
KONIMAN Member Join Date: Mar 2008 Location: Hebron, KY. Posts: 52 jason iTrader: 0 / 0%	koni ha, i think i built those lol.... They started out as a mustang rear

03-09-2008, 11:55 AM	#154 (permalink)
KONIMAN Member Join Date: Mar 2008 Location: Hebron, KY. Posts: 52 jason iTrader: 0 / 0%	im im's?

03-10-2008, 09:44 PM	#155 (permalink)
Bills330i Junior Member Join Date: Mar 2008 Posts: 9 iTrader: 0 / 0%	Track Day Camber Settings Greg, Read all 8 pages. Still not sure about settings. What are your recomended camber settings for Track Days. I have an 08 Si sedan. Also recommended front camber bolts and rear adjuster. Watkins Glen April 29th

03-10-2008, 11:43 PM	#157 (permalink)
meeks Senior Member Join Date: Jan 2008 Location: vancouver Posts: 763 iTrader: 2 / 100%	im going to wait for the konis!! rawr. :)