Megan knocking to my door

CHALO · 03-22-2007, 07:16 PM

Finally my pieces arrived
Megan racing:
Downpipe, Red lower H- Brace and Red rear lower tie bar
Plus Hawk HPS front and rear brake pads.

Nurse tools please

The downpipe installation is very easy but don't forget to get the 3 nuts and srews that join the downpipe and midpipe.

The Lower H-Brace installation is peace of cake.

Clearance:

After my first test drive the brace is totally scratched.... f...ing speed bumbers

To install the rear lower tie bar don't forget use the jacks before you remove the arm screw

I don't have pics of the brake pads installation(Camara battery is dead

)

Before the mid night I hope to finish the installation of the fog lights(they arrived while i installed the H-Brace

)

Sorry for my english but is not my native language

Salu2.

**Yodums** · 03-22-2007, 07:34 PM

Looking good. Do you notice any gains on the downpipe? You're hooking it up to the stock exhaust, right?

***WeSellCarParts*** · 03-22-2007, 08:17 PM

glad to see you finally got the items.. giving you itrader rating now. thanks :)

DTurnbull · 03-22-2007, 08:24 PM

I want a tiled garage floor too....

hoanger · 03-22-2007, 09:30 PM

is the megan downpipe for both SI and non-Si?
and nice mods, I want to get braces and tie bars down the road...

CHALO · 03-22-2007, 10:00 PM

Quote:

Originally Posted by Yodums

Looking good. Do you notice any gains on the downpipe? You're hooking it up to the stock exhaust, right?

Yes i notice the gains (no too much but is there) on mid and high rev.
the sound change a little bit (i installed Fujita CAI).
The biggest change is the revolitions when the car is idle. before 800rpm now 600rpm. (warm on)

Salu2

CHALO · 03-22-2007, 10:08 PM

Quote:

Originally Posted by hoanger

is the megan downpipe for both SI and non-Si?
and nice mods, I want to get braces and tie bars down the road...

No man the downpipe is only for no-Si

but look that we have a downpipe for us R18 but not a decent catback. (i'm waiting for greddy ti-C).

damdam · 03-22-2007, 10:12 PM

looks goood

**ImTheVoiceOfGod** · 03-22-2007, 10:18 PM

Nice work.

hoanger · 03-22-2007, 10:30 PM

Quote:

Originally Posted by CHALO

No man the downpipe is only for no-Si

but look that we have a downpipe for us R18 but not a decent catback. (i'm waiting for greddy ti-C).

sorry dude, had a little trouble understanding... i know english is not strong for ya, no worries.

so the downpipe is for the R18? If so, I think I might just order one lol

hoanger · 03-22-2007, 10:32 PM

Oh nvm, I just checked the vendor you bought it from and it cleared it up!
thanks!

CHALO · 03-22-2007, 10:39 PM

Quote:

Originally Posted by hoanger

Oh nvm, I just checked the vendor you bought it from and it cleared it up!
thanks!

I bought all megan stuff with WeSellCarParts
The hawks pads with corsport
Both of them have a great service
And the fogs on EBay.

***Ruthless909*** · 03-22-2007, 10:43 PM

Very nice work..

StLVtec · 03-23-2007, 02:13 PM

i havent installed my rear tie yet, but what do you mean place the jacks first?

SIcBoy · 03-23-2007, 02:16 PM

any power with that down pipe
looks good

***unplugged*** · 03-23-2007, 02:21 PM

The factory and aftermarket look the same as far as bends go. I don't see how it can free up hp? Am I missing something maybe?

SIcBoy · 03-23-2007, 02:26 PM

Quote:

Originally Posted by unplugged

The factory and aftermarket look the same as far as bends go. I don't see how it can free up hp? Am I missing something maybe?

thats what i was thinking
but i just wanted to make sure

audiophile · 03-23-2007, 02:45 PM

Quote:

Originally Posted by unplugged

The factory and aftermarket look the same as far as bends go. I don't see how it can free up hp? Am I missing something maybe?

I'm sure the ID is slightly larger... probably 2 1/4?

CHALO · 03-23-2007, 03:01 PM

Quote:

Originally Posted by audiophile

I'm sure the ID is slightly larger... probably 2 1/4?

That is right the ID=2.250" The gains is not incredible but you can feel it.

***unplugged*** · 03-23-2007, 03:03 PM

Quote:

Originally Posted by CHALO

That is right the ID=2.250" The gains is not incredible but you can feel it.

what is the stock size? 2 inches?

Is it worth the 150?

03-22-2007, 07:16 PM	#1 (permalink)
CHALO Senior Member Join Date: Mar 2006 Location: Mexico Age: 29 Posts: 200 Gonzalo iTrader: 2 / 100%	Megan knocking to my door Finally my pieces arrived Megan racing: Downpipe, Red lower H- Brace and Red rear lower tie bar Plus Hawk HPS front and rear brake pads. Nurse tools please The downpipe installation is very easy but don't forget to get the 3 nuts and srews that join the downpipe and midpipe. The Lower H-Brace installation is peace of cake. Clearance: After my first test drive the brace is totally scratched.... f...ing speed bumbers To install the rear lower tie bar don't forget use the jacks before you remove the arm screw I don't have pics of the brake pads installation(Camara battery is dead ) Before the mid night I hope to finish the installation of the fog lights(they arrived while i installed the H-Brace ) Sorry for my english but is not my native language Salu2.

03-22-2007, 08:17 PM	#3 (permalink)
*WeSellCarParts* 8thcivic Sponsor Join Date: Feb 2007 Location: PA Posts: 1,576 Dan iTrader: 49 / 100%	glad to see you finally got the items.. giving you itrader rating now. thanks :) __________________ WeSellCarParts.com 2006+ Honda Civic Parts Page - Your #1 Source for Car Parts. If you don't see what you need, just ask

03-23-2007, 02:21 PM	#16 (permalink)
*unplugged* VIP Member Join Date: Sep 2005 Location: NJ Age: 24 Posts: 1,266 iTrader: 1 / 100%	The factory and aftermarket look the same as far as bends go. I don't see how it can free up hp? Am I missing something maybe? __________________ - Mark 2008 Honda Civic SI (stock) 2006 Honda Civic EX (sold)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Ambient lighting in door handles	PokeyD16Z	Interior Style Mods	65	10-24-2008 10:53 AM
WeSellCarParts.com//Megan Racing Products all on special!	WeSellCarParts	WeSellCarParts.com	75	03-15-2008 09:08 PM
Re: Auto unlock on all doors	koreth	Civic Coupe And Sedan	44	10-16-2006 01:27 AM
Mini DIY - Fixed my elusive door rattle	PokeyD16Z	Do It Yourself Articles	6	09-13-2006 10:17 PM

03-22-2007, 07:34 PM	#2 (permalink)
Yodums Scrodums Join Date: May 2006 Location: Ottawa, Canada Posts: 8,428 HIRO - ಠ_ಠ iTrader: 10 / 100%	Looking good. Do you notice any gains on the downpipe? You're hooking it up to the stock exhaust, right?

03-22-2007, 08:24 PM	#4 (permalink)
DTurnbull Senior Member Join Date: Aug 2006 Posts: 396 iTrader: 0 / 0%	I want a tiled garage floor too....

03-22-2007, 09:30 PM	#5 (permalink)
hoanger Senior Member Join Date: Apr 2006 Location: Calgary, Alberta Posts: 5,660 Jason iTrader: 2 / 100%	is the megan downpipe for both SI and non-Si? and nice mods, I want to get braces and tie bars down the road...

03-22-2007, 10:12 PM	#8 (permalink)
damdam Senior Member Join Date: Mar 2006 Location: Markham Posts: 897 iTrader: 12 / 100%	looks goood

03-22-2007, 10:18 PM	#9 (permalink)
ImTheVoiceOfGod Soup-R-Charged! Join Date: Dec 2006 Location: SoCal Age: 27 Posts: 29,035 Corsport Fanboi iTrader: 18 / 100%	Nice work.

03-22-2007, 10:32 PM	#11 (permalink)
hoanger Senior Member Join Date: Apr 2006 Location: Calgary, Alberta Posts: 5,660 Jason iTrader: 2 / 100%	Oh nvm, I just checked the vendor you bought it from and it cleared it up! thanks!

03-22-2007, 10:43 PM	#13 (permalink)
*Ruthless909* Ahhh! Domokun! Join Date: Aug 2006 Location: +Evil Empire+ So.Cal (951) Age: 23 Posts: 8,104 4dr WhOrE!!! iTrader: 3 / 100%	Very nice work..

03-23-2007, 02:13 PM	#14 (permalink)
StLVtec Senior Member Join Date: Nov 2006 Location: st.louis Posts: 958 iTrader: 7 / 100%	i havent installed my rear tie yet, but what do you mean place the jacks first?

03-23-2007, 02:16 PM	#15 (permalink)
SIcBoy Senior Member Join Date: Jul 2006 Location: peoria az Age: 24 Posts: 3,431 jr iTrader: 3 / 100%	any power with that down pipe looks good