Camber Kit Question

***SiBill29*** · 02-08-2007, 08:30 PM

Si drivers which camber kit do you recommend? When i first joined the form a few months back SPC was the only company making them and people were having problems with noise etc. Any recommendations to which i should go with?

***airportguy770*** · 02-08-2007, 08:31 PM

i have the SPC camber kit on my Si and I havnt heard any noises out of it. It did its job just fine, no complaints

***SiBill29*** · 02-08-2007, 08:38 PM

ok thanks.

adoBoy619 · 02-10-2007, 03:35 AM

i just got the Skunk2 rear arms

06_fiji_si_85 · 02-12-2007, 09:22 PM

I just got the Skunk2 rear camber kit. It is the cheapest and a really great kit from what I hear. Can't wait to put them on to find out for sure.

adoBoy619 · 02-13-2007, 05:27 AM

i put the skunk2's on on saturday already...i'll post pics this afternoon/evening. the guys at sears said it wasnt that hard for him to adjust...just a little extra time taken though. all in all, the ride feels great....goog alignment

adoBoy619 · 02-13-2007, 05:28 AM

good alignment

***SiBill29*** · 02-14-2007, 11:54 PM

Great! thanks for the feedback appreciate it now that everything is falling into play i can start making some decisions!

06_fiji_si_85 · 02-15-2007, 03:42 PM

How much did it cost to get your alignment?

adoBoy619 · 02-15-2007, 06:00 PM

it cost me around $96 from sears.

06blaksi · 02-15-2007, 06:20 PM

I got the skunk2 camber kit...installing this weekend

02-08-2007, 08:30 PM	#1 (permalink)
*SiBill29* Nuno,Jason,Bill at Pacha! Join Date: Oct 2006 Location: Dirty Jerzzzzzz Age: 23 Posts: 3,037 Bill iTrader: 7 / 100%	Camber Kit Question Si drivers which camber kit do you recommend? When i first joined the form a few months back SPC was the only company making them and people were having problems with noise etc. Any recommendations to which i should go with?

02-08-2007, 08:38 PM	#3 (permalink)
*SiBill29* Nuno,Jason,Bill at Pacha! Join Date: Oct 2006 Location: Dirty Jerzzzzzz Age: 23 Posts: 3,037 Bill iTrader: 7 / 100%	ok thanks. Last edited by SiBill29; 02-08-2007 at 08:48 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camber Kit with HFP suspension?	K20FG2	Suspension and Brakes	5	04-27-2007 03:16 AM
i got away without camber kit.	darna	Suspension and Brakes	13	12-10-2006 02:08 PM
Comptech vs SPC camber kit....need pics	06Fg2	Suspension and Brakes	8	12-07-2006 11:18 PM
Do you need a front camber kit too?	Marin	Suspension and Brakes	4	08-08-2006 07:55 PM

02-08-2007, 08:31 PM	#2 (permalink)
*airportguy770* VIP Member Join Date: Jun 2006 Location: Stockbridge,GA Age: 25 Posts: 9,187 Dave iTrader: 11 / 100%	i have the SPC camber kit on my Si and I havnt heard any noises out of it. It did its job just fine, no complaints

02-10-2007, 03:35 AM	#4 (permalink)
adoBoy619 Senior Member Join Date: Jan 2007 Location: Virignia Beach/ San Diego Age: 25 Posts: 462 Rollin iTrader: 0 / 0%	i just got the Skunk2 rear arms

02-12-2007, 09:22 PM	#5 (permalink)
06_fiji_si_85 Senior Member Join Date: Jul 2006 Location: New Orleans/ Lafayette, LA Age: 23 Posts: 311 Corey iTrader: 0 / 0%	I just got the Skunk2 rear camber kit. It is the cheapest and a really great kit from what I hear. Can't wait to put them on to find out for sure.

02-13-2007, 05:27 AM	#6 (permalink)
adoBoy619 Senior Member Join Date: Jan 2007 Location: Virignia Beach/ San Diego Age: 25 Posts: 462 Rollin iTrader: 0 / 0%	i put the skunk2's on on saturday already...i'll post pics this afternoon/evening. the guys at sears said it wasnt that hard for him to adjust...just a little extra time taken though. all in all, the ride feels great....goog alignment

02-13-2007, 05:28 AM	#7 (permalink)
adoBoy619 Senior Member Join Date: Jan 2007 Location: Virignia Beach/ San Diego Age: 25 Posts: 462 Rollin iTrader: 0 / 0%	good alignment

02-14-2007, 11:54 PM	#8 (permalink)
*SiBill29* Nuno,Jason,Bill at Pacha! Join Date: Oct 2006 Location: Dirty Jerzzzzzz Age: 23 Posts: 3,037 Bill iTrader: 7 / 100%	Great! thanks for the feedback appreciate it now that everything is falling into play i can start making some decisions!

02-15-2007, 03:42 PM	#9 (permalink)
06_fiji_si_85 Senior Member Join Date: Jul 2006 Location: New Orleans/ Lafayette, LA Age: 23 Posts: 311 Corey iTrader: 0 / 0%	How much did it cost to get your alignment?

02-15-2007, 06:00 PM	#10 (permalink)
adoBoy619 Senior Member Join Date: Jan 2007 Location: Virignia Beach/ San Diego Age: 25 Posts: 462 Rollin iTrader: 0 / 0%	it cost me around $96 from sears.

02-15-2007, 06:20 PM	#11 (permalink)
06blaksi Senior Member Member Join Date: Apr 2006 Location: in teh basement Age: 41 Posts: 49,431 iTrader: 23 / 100%	I got the skunk2 camber kit...installing this weekend