spoon sports inner fender braces

guywitthesi · 02-27-2010, 07:54 PM

i contacted spoon about fitment on our u.s. models, they will be returing my phone call as soon as they find out.

italianbuca · 02-27-2010, 07:57 PM

gotta love spoon =) haha

but I thought the front end of the 8thgens was already stiff enough, and that the rear end is where bracing truly helps out.

correct me if i'm wrong =p

Albrecq'sSI · 03-02-2010, 07:46 PM

VanSi07 · 03-03-2010, 12:35 AM

Silly.

Another product for those with too much cash and too little sense.

Ayodog · 03-03-2010, 12:41 AM

err pretty sure its been gone over that the one type of bracing that'll help are fender braces. Mainly just for hard braking.

VanSi07 · 03-03-2010, 01:14 AM

If you want to bolt up bits of sheetmetal and pretend your Si is a racecar, that's fine.

But don't act like it's going to be some big improvement for your $250 or whatever. That's money better spent elsewhere.

chugiboi · 03-03-2010, 02:06 AM

I'm pretty sure that it should fit the Civic sedan.

I agree with the other members, it's not worth it.

But it's your money so do what you must.

***Berndonfat*** · 03-03-2010, 03:38 PM

what about the coilovers?

chungyfied · 03-04-2010, 06:32 AM

its a world of difference when it comes to the feel of the car, especially the turn in response.
in terms of timing on the track, probably not so much.

its also a pain in the ass to install, you have the practically strip the entire front portion of the car.
this is how it goes on
btw, im not from the USA so i cant say if it would fit your cars.

***Berndonfat*** · 03-04-2010, 10:58 AM

good lawd

JDM_FG2 · 03-04-2010, 01:15 PM

its gonna cost an arm and a leg haha SPOON FTW!!

***Berndonfat*** · 03-04-2010, 02:38 PM

not as much as mugen

guywitthesi · 03-04-2010, 03:25 PM

i think our chassis are the same, i have other jdm braces on my car and fitment hasn't been an issue.

02-27-2010, 07:54 PM	#1 (permalink)
guywitthesi Senior Member Join Date: Jan 2008 Location: oxnard Age: 28 Posts: 575 manuel jimenez	spoon sports inner fender braces i contacted spoon about fitment on our u.s. models, they will be returing my phone call as soon as they find out.
	Tweet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Did you get rear inner fender liners?	Rach	Civic Coupe And Sedan	5	07-29-2010 12:14 AM
About that inner fender...	newspaperboy	Inside and Out	1	06-18-2008 01:14 AM
quick: how to remove inner fender?	falkon57	Do It Yourself Articles	9	02-25-2007 03:17 PM
inner fender?	rippars	Bolt-Ons And All-Motor	17	11-01-2006 07:47 PM

02-27-2010, 07:57 PM	#2 (permalink)
italianbuca Senior Member Join Date: Nov 2008 Location: Boston, MA Age: 21 Posts: 591 Gianluca	gotta love spoon =) haha but I thought the front end of the 8thgens was already stiff enough, and that the rear end is where bracing truly helps out. correct me if i'm wrong =p

03-02-2010, 07:46 PM	#3 (permalink)
Albrecq'sSI Senior Member Join Date: Mar 2009 Location: Team Paolo Member #3 Age: 22 Posts: 2,774 Seanzie

03-03-2010, 12:35 AM	#4 (permalink)
VanSi07 Senior Member Join Date: Jun 2008 Location: Vancouver, BC Age: 26 Posts: 1,971	Silly. Another product for those with too much cash and too little sense.

03-03-2010, 12:41 AM	#5 (permalink)
Ayodog Senior Member Join Date: Dec 2007 Location: YL OC CALI Age: 22 Posts: 3,371 rori ( f*ck your form ) <3	err pretty sure its been gone over that the one type of bracing that'll help are fender braces. Mainly just for hard braking.

03-03-2010, 01:14 AM	#6 (permalink)
VanSi07 Senior Member Join Date: Jun 2008 Location: Vancouver, BC Age: 26 Posts: 1,971	If you want to bolt up bits of sheetmetal and pretend your Si is a racecar, that's fine. But don't act like it's going to be some big improvement for your $250 or whatever. That's money better spent elsewhere.

03-03-2010, 02:06 AM	#7 (permalink)
chugiboi Senior Member Join Date: Aug 2007 Location: Stockton Ca Age: 25 Posts: 7,678 Chue Hang	I'm pretty sure that it should fit the Civic sedan. I agree with the other members, it's not worth it. But it's your money so do what you must.

03-03-2010, 03:38 PM	#8 (permalink)
*Berndonfat* stabn with a purple knife Join Date: Apr 2009 Location: Durham NC Age: 23 Posts: 4,136 Brandon	what about the coilovers?

03-04-2010, 06:32 AM	#9 (permalink)
chungyfied Member Join Date: Nov 2007 Location: Asia Posts: 92	its a world of difference when it comes to the feel of the car, especially the turn in response. in terms of timing on the track, probably not so much. its also a pain in the ass to install, you have the practically strip the entire front portion of the car. this is how it goes on btw, im not from the USA so i cant say if it would fit your cars.

03-04-2010, 10:58 AM	#10 (permalink)
*Berndonfat* stabn with a purple knife Join Date: Apr 2009 Location: Durham NC Age: 23 Posts: 4,136 Brandon	good lawd

03-04-2010, 01:15 PM	#11 (permalink)
JDM_FG2 Senior Member Join Date: Jan 2010 Location: socal Posts: 1,176 Jacob	its gonna cost an arm and a leg haha SPOON FTW!!

03-04-2010, 02:38 PM	#12 (permalink)
*Berndonfat* stabn with a purple knife Join Date: Apr 2009 Location: Durham NC Age: 23 Posts: 4,136 Brandon	not as much as mugen

03-04-2010, 03:25 PM	#13 (permalink)
guywitthesi Senior Member Join Date: Jan 2008 Location: oxnard Age: 28 Posts: 575 manuel jimenez	i think our chassis are the same, i have other jdm braces on my car and fitment hasn't been an issue.

Remove Advertisements Sponsored Links
8th Generation Honda Civic Forum Advertisement