Comptech or Tein S Tech Springs?

nab33 · 07-04-2006, 12:02 AM

Which springs should I get out of these two... I'm looking for performance over looks, so which has a higher spring rate? thanks in advance for the info...

negativezeroz · 07-11-2006, 04:24 PM

Comptech doesn't seem to want to show their spring rates. But the Tein's are 230 lb/in (front) and 270 lb/in (rear). The S-Techs will drop the car more. I also am assuming you have an Si...

nab33 · 07-13-2006, 11:49 PM

Hey thanks for the reply... I'm thinking on purchasing an Si and am looking at all the options available before hand... Whats the stock spring rate?

2evolved · 07-14-2006, 12:26 AM

You know I'm also debating on springs right now but I really wish they came out with some better struts for the car so I can do them at the same time... I'm really considering the HFP suspension, struts and springs for $600 is not bad at all.

BLU BY U · 07-14-2006, 07:13 AM

Quote:

Originally Posted by 2evolved

You know I'm also debating on springs right now but I really wish they came out with some better struts for the car so I can do them at the same time... I'm really considering the HFP suspension, struts and springs for $600 is not bad at all.

not only that but you get to keep your warranty on the suspension. ive been leaning on this too.

06DX_G · 07-14-2006, 06:00 PM

tein spring....that's a no brainer

07-04-2006, 12:02 AM	#1 (permalink)
nab33 Junior Member Join Date: Jul 2006 Location: Aibonito, PR Posts: 9 iTrader: 0 / 0%	Comptech or Tein S Tech Springs? Which springs should I get out of these two... I'm looking for performance over looks, so which has a higher spring rate? thanks in advance for the info...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tein s lowering springs	vingavina	CorSport	5	06-06-2006 05:36 PM
??? ON EX with TEIN springs	CANMAN	Suspension and Brakes	3	06-01-2006 12:59 AM
new comptech springs for civic	SiGTi	Suspension and Brakes	10	04-27-2006 12:08 AM
Tein Basic vs. Tein SS?	duy2006si	Suspension and Brakes	2	04-18-2006 01:46 AM
Tein Springs and specs	THM8	Civic Coupe And Sedan	8	11-07-2005 09:12 PM

07-11-2006, 04:24 PM	#2 (permalink)
negativezeroz Senior Member Join Date: Mar 2006 Location: OK Age: 20 Posts: 1,792 iTrader: 2 / 100%	Comptech doesn't seem to want to show their spring rates. But the Tein's are 230 lb/in (front) and 270 lb/in (rear). The S-Techs will drop the car more. I also am assuming you have an Si...

07-13-2006, 11:49 PM	#3 (permalink)
nab33 Junior Member Join Date: Jul 2006 Location: Aibonito, PR Posts: 9 iTrader: 0 / 0%	Hey thanks for the reply... I'm thinking on purchasing an Si and am looking at all the options available before hand... Whats the stock spring rate?

07-14-2006, 12:26 AM	#4 (permalink)
2evolved Senior Member Join Date: May 2006 Location: Boston Age: 24 Posts: 603 iTrader: 3 / 100%	You know I'm also debating on springs right now but I really wish they came out with some better struts for the car so I can do them at the same time... I'm really considering the HFP suspension, struts and springs for $600 is not bad at all.

07-14-2006, 06:00 PM	#6 (permalink)
06DX_G Senior Member Join Date: Jun 2006 Location: In the garage Age: 21 Posts: 156 Scotty iTrader: 0 / 0%	tein spring....that's a no brainer