Fitment of New Jot-1X Turbo Manifold for R18

csuccess · 03-10-2008, 11:38 AM

Is being reposted for regional area - Southeast USA

Originally Posted by csuccess
Hi Wally,

I also live in Montgomery. My company "Turbionics" -(eBay Store - turbionics: TURBOS, T3T4, WASTEGATE), sells turbo kits and components on the internet. We ship worldwide at present. We have designed the a completely new turbo manifold for the R18 (not a factory cutoff with a flange). We believe this wil be a great start for DIY enthusiast. We also plan to offer a Universal Kit for the R18 which will contain all the needed major components. I have been in contact with an 8thCivic member for about 10 weeks. I told him that we would consider the project. As of last month, we actually have a manifold and are finishing the final assemblying. Our high temp coating just arrived. We are ready for fitment and saw that there were several members in/near Alabama. Are any of the other members driving R18's. We look forward to hearing from any R18's in the southeast. Thanks for your time.

Since we don't get to check forums very much, please reply to direct email -

csuccess@lycos.com

Calvin-
Turbionics
334-201-9806

Wally · 03-10-2008, 12:43 PM

Nice would be interested to see what the full kit and costs come out to be.

Dyno numbers and other details are a must too!

-W

PS: I'm not the one they've been in contact with. My R18 is still stock as far as the engine system goes (that is if a K&N drop in filter doesn't change things).

03-10-2008, 11:38 AM	#1 (permalink)
csuccess Junior Member Join Date: Jan 2008 Location: Montgomery, Alabama Posts: 2 Calvin Lasley iTrader: 0 / 0%	Fitment of New Jot-1X Turbo Manifold for R18 Is being reposted for regional area - Southeast USA Originally Posted by csuccess Hi Wally, I also live in Montgomery. My company "Turbionics" -(eBay Store - turbionics: TURBOS, T3T4, WASTEGATE), sells turbo kits and components on the internet. We ship worldwide at present. We have designed the a completely new turbo manifold for the R18 (not a factory cutoff with a flange). We believe this wil be a great start for DIY enthusiast. We also plan to offer a Universal Kit for the R18 which will contain all the needed major components. I have been in contact with an 8thCivic member for about 10 weeks. I told him that we would consider the project. As of last month, we actually have a manifold and are finishing the final assemblying. Our high temp coating just arrived. We are ready for fitment and saw that there were several members in/near Alabama. Are any of the other members driving R18's. We look forward to hearing from any R18's in the southeast. Thanks for your time. Since we don't get to check forums very much, please reply to direct email - csuccess@lycos.com Calvin- Turbionics 334-201-9806

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY 2006 SI Turbo Related: Fuel Injector and Rail Removal/Installation (PIC Heavy)	blueroadster	Engine	38	02-13-2008 10:20 AM
AJP Turbo Kit Customers: Post Thoughts on Your Experience	blueroadster	Forced Induction And Nitrous	15	03-07-2007 10:44 AM
Sneak pics of my turbo kit.	sickyute	Forced Induction And Nitrous	22	08-30-2006 09:44 PM
Turbo and CAI	CaliGuy	Forced Induction And Nitrous	32	06-13-2006 12:46 AM

03-10-2008, 12:43 PM	#2 (permalink)
Wally Senior Member Join Date: Jan 2006 Location: Montgomery, AL Posts: 227 EX Coupe MT iTrader: 3 / 100%	Nice would be interested to see what the full kit and costs come out to be. Dyno numbers and other details are a must too! -W PS: I'm not the one they've been in contact with. My R18 is still stock as far as the engine system goes (that is if a K&N drop in filter doesn't change things).