Little Rock Ar. chat thread - Page 199

GlxyGry06Si · 08-05-2008, 12:02 PM

Quote:

Originally Posted by Zarh

So, how quick did it overheat? (and how do you know if you did overheat it besides the temp gauge?)

i dont know. i stepped in the house for about 15 minutes with the car running and when i came back out it was overheated.

thats cool aaron. I may be able to come out both nights.

KillerRabbit · 08-05-2008, 12:05 PM

Quote:

Originally Posted by GlxyGry06Si

i dont know. i stepped in the house for about 15 minutes with the car running and when i came back out it was overheated.

thats cool aaron. I may be able to come out both nights.

right on, i got to also clean up my garage and move stuff around so my moms car will fit in there.

GlxyGry06Si · 08-05-2008, 05:18 PM

aaron what did you find out about e-manage ultimate? v-manage?

what about haltech or blitz?

Zarh · 08-05-2008, 07:11 PM

So, what did it do when its overheated? does it throw a CEL or something? or are you just commenting from the temp gauge?

GlxyGry06Si · 08-05-2008, 07:31 PM

no i was just commenting cuz the temp guage. Im sure it was fine but i was just worried.

Zarh · 08-05-2008, 09:07 PM

How high did it get to on the guage?

GlxyGry06Si · 08-05-2008, 09:14 PM

Quote:

Originally Posted by Zarh

How high did it get to on the guage?

all the way to the top.

redicansFijiSi · 08-05-2008, 09:36 PM

Quote:

Originally Posted by GlxyGry06Si

all the way to the top.

that sucks. i had to replace the motor in my 97 when it overheated. the head was warped when i bought it though so it had obviously been ragged to hell. that's why i'll never by another used car.

GlxyGry06Si · 08-05-2008, 09:40 PM

Quote:

Originally Posted by redicansFijiSi

that sucks. i had to replace the motor in my 97 when it overheated. the head was warped when i bought it though so it had obviously been ragged to hell. that's why i'll never by another used car.

no. there are no problems. well that i can tell now. If i warped the head i would have noticed.

redicansFijiSi · 08-05-2008, 09:55 PM

i didn't know it was either until there was oil in the radiator fluid. i'm not saying that is what happened just noting my experience with over heating.

Zarh · 08-05-2008, 09:58 PM

I lost a little coolant when I did my SRI install... The coolant resorvoir is just above the min mark... It has been bothering me... I think I will order some Honda OEM coolant.

BadazzSi · 08-05-2008, 11:29 PM

ill try and be out on friday and saturday night. i think ashley was saying that she wanted to go out friday night also. she will be coming with me on saturday as well.

KillerRabbit · 08-05-2008, 11:57 PM

yea on the k-series, if it overheats it will leak down the block regardless.
on the b and d series it has thicker head gaskets and will not leak, only in the oil.

jarred call me when u can

GlxyGry06Si · 08-06-2008, 12:51 PM

i will only be able to go to shell friday night. I got a free trip to Tunica to one of the casino's.

KillerRabbit · 08-06-2008, 01:17 PM

you suck

BadazzSi · 08-06-2008, 06:04 PM

here u go jarred nst started this thread today
the COMPREHENSIVE thread on NST (NonStopTuning) Pulleys

GlxyGry06Si · 08-06-2008, 06:06 PM

Quote:

Originally Posted by BadazzSi

here u go jarred nst started this thread today
the COMPREHENSIVE thread on NST (NonStopTuning) Pulleys

what do you want me to do?

BadazzSi · 08-06-2008, 06:08 PM

tell them what u think. its perrty much just for a review. i would give my honest opinion. ur the only person that i know that has them

GlxyGry06Si · 08-06-2008, 06:10 PM

Quote:

Originally Posted by BadazzSi

tell them what u think. its perrty much just for a review. i would give my honest opinion. ur the only person that i know that has them

i cant give them an honest review until i get redyno'd.

BadazzSi · 08-06-2008, 06:15 PM

thats true. do u work tomorrow

08-05-2008, 11:57 PM	#3973 (permalink)
KillerRabbit Senior Member Join Date: Apr 2008 Location: Conway, AR Age: 19 Posts: 148 Aaron iTrader: 0 / 0%	yea on the k-series, if it overheats it will leak down the block regardless. on the b and d series it has thicker head gaskets and will not leak, only in the oil. jarred call me when u can Last edited by KillerRabbit; 08-05-2008 at 11:59 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Arizona chat thread	8yourv8	West	392	11-17-2008 09:39 PM
PA Chat Thread	07LX	Mid-Atlantic	287	07-28-2008 12:59 AM
SoCal Chat Thread	ayenoc	California South	4811	06-18-2008 10:31 PM
What is a chat thread without CHAT?!	LikWidv1	8thcivic.com Site Questions/ Problems	65	10-25-2007 05:11 PM
Mid-Atlantic Chat Thread	rippars	Mid-Atlantic	14304	10-25-2007 12:19 AM

08-05-2008, 05:18 PM	#3963 (permalink)
GlxyGry06Si Senior Member Join Date: May 2006 Location: Jacksonville, AR Age: 23 Posts: 7,087 iTrader: 3 / 100%	aaron what did you find out about e-manage ultimate? v-manage? what about haltech or blitz?

08-05-2008, 07:11 PM	#3964 (permalink)
Zarh Senior Member Join Date: Jun 2008 Location: Southern Arkanasas Age: 24 Posts: 305 Michael iTrader: 0 / 0%	So, what did it do when its overheated? does it throw a CEL or something? or are you just commenting from the temp gauge?

08-05-2008, 07:31 PM	#3965 (permalink)
GlxyGry06Si Senior Member Join Date: May 2006 Location: Jacksonville, AR Age: 23 Posts: 7,087 iTrader: 3 / 100%	no i was just commenting cuz the temp guage. Im sure it was fine but i was just worried.

08-05-2008, 09:07 PM	#3966 (permalink)
Zarh Senior Member Join Date: Jun 2008 Location: Southern Arkanasas Age: 24 Posts: 305 Michael iTrader: 0 / 0%	How high did it get to on the guage?

08-05-2008, 09:55 PM	#3970 (permalink)
redicansFijiSi Senior Member Join Date: Aug 2007 Location: Arkansas Posts: 413 Seth iTrader: 0 / 0%	i didn't know it was either until there was oil in the radiator fluid. i'm not saying that is what happened just noting my experience with over heating.

08-05-2008, 09:58 PM	#3971 (permalink)
Zarh Senior Member Join Date: Jun 2008 Location: Southern Arkanasas Age: 24 Posts: 305 Michael iTrader: 0 / 0%	I lost a little coolant when I did my SRI install... The coolant resorvoir is just above the min mark... It has been bothering me... I think I will order some Honda OEM coolant.

08-05-2008, 11:29 PM	#3972 (permalink)
BadazzSi Senior Member Join Date: Dec 2007 Location: Jacksonville, AR originally from Delaware Posts: 540 Bryan iTrader: 2 / 100%	ill try and be out on friday and saturday night. i think ashley was saying that she wanted to go out friday night also. she will be coming with me on saturday as well.

08-06-2008, 12:51 PM	#3974 (permalink)
GlxyGry06Si Senior Member Join Date: May 2006 Location: Jacksonville, AR Age: 23 Posts: 7,087 iTrader: 3 / 100%	i will only be able to go to shell friday night. I got a free trip to Tunica to one of the casino's.

08-06-2008, 01:17 PM	#3975 (permalink)
KillerRabbit Senior Member Join Date: Apr 2008 Location: Conway, AR Age: 19 Posts: 148 Aaron iTrader: 0 / 0%	you suck

08-06-2008, 06:04 PM	#3976 (permalink)
BadazzSi Senior Member Join Date: Dec 2007 Location: Jacksonville, AR originally from Delaware Posts: 540 Bryan iTrader: 2 / 100%	here u go jarred nst started this thread today the COMPREHENSIVE thread on NST (NonStopTuning) Pulleys

08-06-2008, 06:08 PM	#3978 (permalink)
BadazzSi Senior Member Join Date: Dec 2007 Location: Jacksonville, AR originally from Delaware Posts: 540 Bryan iTrader: 2 / 100%	tell them what u think. its perrty much just for a review. i would give my honest opinion. ur the only person that i know that has them

08-06-2008, 06:15 PM	#3980 (permalink)
BadazzSi Senior Member Join Date: Dec 2007 Location: Jacksonville, AR originally from Delaware Posts: 540 Bryan iTrader: 2 / 100%	thats true. do u work tomorrow