NC Chat/Meet thread - Page 78

SiAzul · 01-04-2008, 05:46 PM

what happened, you didnt like it?

ccking85 · 01-04-2008, 08:32 PM

Quote:

Originally Posted by ameuba10

i believe that there are nice kits out there than that and cheaper. i like the touren but if you want more attention id go with the raven kit. imo

You got a link to those?

ameuba10 · 01-05-2008, 02:07 AM

Raven
- Honda Civic 2006-2007 - Body Kits - Full Body Kit
Tourren
TOURENN Downforce body kit.

mattsbobo · 01-05-2008, 03:59 PM

Anybody have any experience with using an air filter cleaner kit? I'm getting really shitty MPG's, and I figure this could be one reason for it. Any help would be appreciated.

NcSi · 01-05-2008, 04:11 PM

i just cleaned my injen filter with the k&n recharge kit.....not hard just takes awhile letting **** dry n what not..........im prob painting my calipers tomm if u wanna swing by we can do that

hopefully eric wont be a biatch and come

oh yea does neone on here have the scanguage2 im thinking about ordering one

mattsbobo · 01-05-2008, 04:14 PM

Quote:

Originally Posted by NcSi

i just cleaned my injen filter with the k&n recharge kit.....not hard just takes awhile letting **** dry n what not..........im prob painting my calipers tomm if u wanna swing by we can do that

hopefully eric wont be a biatch and come

I almost bought that K&N kit about an hour ago, but figured I'd ask about any experiences with it first. Do you just spray the stuff on the filter, and let it dry out, or is it more involved than that?

NcSi · 01-05-2008, 04:22 PM

it has instructions.......get loose **** off by shaking it or using a toothbrush....then spray the cleaner on it let it sit for 20 mins.........run it under light water until all the red oil is gone....u know when its clean cause the filter wont have the red to it.....shake it to get it somewhat dry then let it dry for a whileeeeeee naturally....... then spray the filter oil from the outside until it gets that red back(DONT USE TO MUCH) let it dry for bout 20 mins....if needed spray some more(thats if it has spots that didnt get oiled.....then after its dry and looks right slap that ***** in.......its easy but time consuming

mattsbobo · 01-05-2008, 04:27 PM

Thanks

Repped

NcSi · 01-05-2008, 04:34 PM

no prob like i said if u need ne help i'll be painting my calipers tomm......ne 8th geners are welcome

im hopin it turns out good ameuba10 is hookin me up with some rr caliper paint and hopefully my black honda stickers for the calipers come in today

CivicBeater · 01-05-2008, 06:35 PM

anyone reccomend a Paintless dent removal guy around raleigh? Need to get a ding taken out this week.

CivicBeater · 01-05-2008, 06:36 PM

Brian, you feel confident enough that just you and I can do coilovers for Chris? I've helped out in 3 installations but just haven't done the whole thing. Josue hasn't messaged me back forever.

mattsbobo · 01-05-2008, 07:02 PM

Quote:

Originally Posted by CivicBeater

anyone reccomend a Paintless dent removal guy around raleigh? Need to get a ding taken out this week.

NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

ccking85 · 01-05-2008, 07:27 PM

Quote:

Originally Posted by CivicBeater

Brian, you feel confident enough that just you and I can do coilovers for Chris? I've helped out in 3 installations but just haven't done the whole thing. Josue hasn't messaged me back forever.

Lets do it. If it breaks I wont hurt you guys to bad. LOL

CivicBeater · 01-05-2008, 07:32 PM

Quote:

Originally Posted by ccking85

Lets do it. If it breaks I wont hurt you guys to bad. LOL

well josue and i did mine

NcSi · 01-05-2008, 07:45 PM

yea i know how everything goes........done it to many f'ing times when do u wanna do it?

CivicBeater · 01-05-2008, 07:53 PM

Quote:

Originally Posted by NcSi

yea i know how everything goes........done it to many f'ing times when do u wanna do it?

u want to set it up for next sunday? That way chris can plan to make the drive...Where do you want to do it?

ameuba10 · 01-05-2008, 08:12 PM

Quote:

Originally Posted by mattsbobo

Anybody have any experience with using an air filter cleaner kit? I'm getting really shitty MPG's, and I figure this could be one reason for it. Any help would be appreciated.

im gettin pretty bad mileage myself but it could be because of cold weather

CivicBeater · 01-05-2008, 08:15 PM

winter fuel mix yo...

mattsbobo · 01-05-2008, 08:16 PM

Quote:

Originally Posted by CivicBeater

winter fuel mix yo...

I went from getting 320 miles out of a tank to about 280

golfer111894 · 01-05-2008, 09:33 PM

**** You Ley!!!!!!!!!!!!!!

01-05-2008, 04:27 PM	#1548 (permalink)
mattsbobo Senior Member Join Date: Dec 2006 Location: Raleigh, NC Age: 35 Posts: 9,218 Herra Frush Hater iTrader: 16 / 100%	ThanksRepped

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/south/39141-nc-chat-meet-thread.html
Posted By	For	Type	Date
NC Chat/Meet thread - Page 88 - 8th Generation Honda Civic Forum	This thread	Refback	12-10-2007 02:54 AM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What happened to my thread???????????????????????!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!	06blaksi	8thcivic.com Site Questions/ Problems	7	04-01-2007 04:41 PM

01-04-2008, 05:46 PM	#1541 (permalink)
SiAzul Senior Member Join Date: Jan 2007 Location: Durham, NC Age: 22 Posts: 4,649 Mario iTrader: 3 / 100%	what happened, you didnt like it?

01-05-2008, 02:07 AM	#1543 (permalink)
ameuba10 Senior Member Join Date: Feb 2007 Location: 919 Posts: 3,213 Adam iTrader: 7 / 100%	Raven - Honda Civic 2006-2007 - Body Kits - Full Body Kit Tourren TOURENN Downforce body kit.

01-05-2008, 03:59 PM	#1544 (permalink)
mattsbobo Senior Member Join Date: Dec 2006 Location: Raleigh, NC Age: 35 Posts: 9,218 Herra Frush Hater iTrader: 16 / 100%	Anybody have any experience with using an air filter cleaner kit? I'm getting really shitty MPG's, and I figure this could be one reason for it. Any help would be appreciated.

01-05-2008, 04:11 PM	#1545 (permalink)
NcSi Senior Member Join Date: Jun 2006 Location: Willow Springs, NC Age: 23 Posts: 3,881 Bryan iTrader: 5 / 100%	i just cleaned my injen filter with the k&n recharge kit.....not hard just takes awhile letting **** dry n what not..........im prob painting my calipers tomm if u wanna swing by we can do that hopefully eric wont be a biatch and come oh yea does neone on here have the scanguage2 im thinking about ordering one

01-05-2008, 04:22 PM	#1547 (permalink)
NcSi Senior Member Join Date: Jun 2006 Location: Willow Springs, NC Age: 23 Posts: 3,881 Bryan iTrader: 5 / 100%	it has instructions.......get loose ** off by shaking it or using a toothbrush....then spray the cleaner on it let it sit for 20 mins.........run it under light water until all the red oil is gone....u know when its clean cause the filter wont have the red to it.....shake it to get it somewhat dry then let it dry for a whileeeeeee naturally....... then spray the filter oil from the outside until it gets that red back(DONT USE TO MUCH) let it dry for bout 20 mins....if needed spray some more(thats if it has spots that didnt get oiled.....then after its dry and looks right slap that *** in.......its easy but time consuming

01-05-2008, 04:34 PM	#1549 (permalink)
NcSi Senior Member Join Date: Jun 2006 Location: Willow Springs, NC Age: 23 Posts: 3,881 Bryan iTrader: 5 / 100%	no prob like i said if u need ne help i'll be painting my calipers tomm......ne 8th geners are welcome im hopin it turns out good ameuba10 is hookin me up with some rr caliper paint and hopefully my black honda stickers for the calipers come in today

01-05-2008, 06:35 PM	#1550 (permalink)
CivicBeater Senior Member Join Date: Jul 2007 Location: Clayton, NC Posts: 2,552 Eric iTrader: 3 / 100%	anyone reccomend a Paintless dent removal guy around raleigh? Need to get a ding taken out this week.

01-05-2008, 06:36 PM	#1551 (permalink)
CivicBeater Senior Member Join Date: Jul 2007 Location: Clayton, NC Posts: 2,552 Eric iTrader: 3 / 100%	Brian, you feel confident enough that just you and I can do coilovers for Chris? I've helped out in 3 installations but just haven't done the whole thing. Josue hasn't messaged me back forever.

01-05-2008, 07:45 PM	#1555 (permalink)
NcSi Senior Member Join Date: Jun 2006 Location: Willow Springs, NC Age: 23 Posts: 3,881 Bryan iTrader: 5 / 100%	yea i know how everything goes........done it to many f'ing times when do u wanna do it?

01-05-2008, 08:15 PM	#1558 (permalink)
CivicBeater Senior Member Join Date: Jul 2007 Location: Clayton, NC Posts: 2,552 Eric iTrader: 3 / 100%	winter fuel mix yo...

01-05-2008, 09:33 PM	#1560 (permalink)
golfer111894 Member Join Date: Dec 2007 Posts: 52 iTrader: 0 / 0%	**** You Ley!!!!!!!!!!!!!!