8th Generation Honda Civic Forum

8th Generation Honda Civic Forum (http://www.8thcivic.com/forums/)
-   Ride Of The Month (http://www.8thcivic.com/forums/ride-month/)
-   -   8thcivic.com October 2012 ROTM Winner: six_speed_demon (http://www.8thcivic.com/forums/ride-month/306301-8thcivic-com-october-2012-rotm-winner-six_speed_demon.html)

0720Steve 11-01-2012 10:01 AM

8thcivic.com October 2012 ROTM Winner: six_speed_demon
 
Congrats to October 2012 Ride of the Month Winner: six_speed_demon


http://i387.photobucket.com/albums/o...ab4549900e.jpg

http://i387.photobucket.com/albums/o...e58aa27935.jpg

http://i387.photobucket.com/albums/o...92ef00bd20.jpg

FULL MOD LIST!

Motor/ Trans ------------->UPDATED NUMBERS 9/22/12 380whp 245 wtq @ 14.0 psi on 93 octane

Ported Jackson Racing Supercharger (by Stiegemeier)
Ported Jackson Racing Supercharger manifold (by Stiegemeier)
1st. Custom Venomcooler for the JRSC (by Stiegemeier )
1st. Custom IMW spec'ed "Icebox" (by Innovative MotorWorks)
Mercracing stage 2 aftercooler
Mercracing JRSC Inlet
Skunk2 72mm Throttle body
3in Blower pulley
K24 6.37 crank pulley
Skunk2 dual Vavle springs
Skunk2 titanium retainers
Toda racing timing chain tensioner
Skunk2 Megapower header V2
Full Race 3in exhaust
Corsport cable bushing
Boomba motor mounts
Boomba fuel rail
FIC 775cc injectors
Hondata 4 bar map sensor
Rsx t stat housing
Mishimoto 160* t stat
T1r iat sensor
Import DPS 3.5in cold air intake
Coolant bypass
Password jdm battery relocate kit
Odyssey battery
Competition stage 4 clutch

Interior mods

Bride door panels
Bride Arm rest
Bride shift boot
I.C.B. Motorsports weight shift knob
Buddy Club Short Shifter
Nik Lawson " short shifter" mod
Xl8r gauge pod v2
AEM boost gauge
AEM air/fuel gauge

Exterior mods
Acura TL-S 17X8 + 45 Wrapped in yokohama S-Drives 235/40/17
Eibach pro-kit springs
Eibach front sway bar
Eibach Rear sway bar
HFP front lip
Black paint grill
JDM Honda emblem
K2 motors fogs with oem wiring!
TSX retros
S2k shroud
Housing painted black
4900k H.I.Ds
Phillips ballast
20% tinit all around
5% strip on windshield

REDMAN'S SuperCooooled RED BARON build thread

snizzletoff 11-01-2012 10:13 AM

Gratz Tyrone!!!!!! :cheerleader:

R18aSedan 11-01-2012 10:22 AM

Congrats!!

07AlBLKeX305 11-01-2012 10:40 AM

Congrats dude. By the way it says you have skunk2 springs and retainers but doesn't say which cams you have. I was just noticing. Unless I missed something. Props on rotm.

deckerbm 11-01-2012 10:40 AM

Congrats dude! So glad I got to see (and hear) this beautiful car at Skyline! :wheee:

snizzletoff 11-01-2012 10:42 AM

Quote:

Originally Posted by 07AlBLKeX305 (Post 10994778)
Congrats dude. By the way it says you have skunk2 springs and retainers but doesn't say which cams you have. I was just noticing. Unless I missed something. Props on rotm.

He has skunk2 stage 2 cams :thumbsup:

six_speed_demon 11-01-2012 10:47 AM

Quote:

Originally Posted by snizzletoff (Post 10994783)
He has skunk2 stage 2 cams :thumbsup:

i did have those cams at one time. im on stock cam since i went boosted! i wanted to run the stage2 cams but derek said they were too much for the blower setup :shrug:

six_speed_demon 11-01-2012 10:48 AM

Quote:

Originally Posted by R18aSedan (Post 10994756)
Congrats!!

Quote:

Originally Posted by 07AlBLKeX305 (Post 10994778)
Congrats dude. By the way it says you have skunk2 springs and retainers but doesn't say which cams you have. I was just noticing. Unless I missed something. Props on rotm.

Quote:

Originally Posted by deckerbm (Post 10994780)
Congrats dude! So glad I got to see (and hear) this beautiful car at Skyline! :wheee:

thanks everyone!:cheerleader::cheerleader:

snizzletoff 11-01-2012 10:51 AM

Quote:

Originally Posted by six_speed_demon (Post 10994799)
i did have those cams at one time. im on stock cam since i went boosted! i wanted to run the stage2 cams but derek said they were too much for the blower setup :shrug:

I stand corrected then, i know the cam + S/C isn't a very well explored thing yet.

six_speed_demon 11-01-2012 10:53 AM

Quote:

Originally Posted by snizzletoff (Post 10994807)
I stand corrected then, i know the cam + S/C isn't a very well explored thing yet.

i wanted to do it bad!!!! but derek told me i would most likely loose power and have tons of blow-by. so i didnt want to chance anything!

civic_si_lover 11-01-2012 11:01 AM

Congrats! such a sick car :wheee:

six_speed_demon 11-01-2012 11:05 AM

Quote:

Originally Posted by civic_si_lover (Post 10994823)
Congrats! such a sick car :wheee:

Thanks!

FBFG 11-01-2012 11:54 AM

Where my 13% at for convincing you to run and to stay in it? Congrats and your welcome

xrs54 11-01-2012 11:58 AM

Congrats man! LOVE the TSX-s wheels! Nuce numbers too!

dc5joey 11-01-2012 11:59 AM

Congrats on a nice ride...

six_speed_demon 11-01-2012 12:12 PM

Quote:

Originally Posted by FBFG (Post 10994964)
Where my 13% at for convincing you to run and to stay in it? Congrats and your welcome

:bighug:

six_speed_demon 11-01-2012 12:13 PM

Quote:

Originally Posted by xrs54 (Post 10994971)
Congrats man! LOVE the TSX-s wheels! Nuce numbers too!

Thanks man!


Quote:

Originally Posted by dc5joey (Post 10994975)
Congrats on a nice ride...

Thanks!

wheatboy 11-01-2012 12:55 PM

Hell ya man!!! Beautiful Build!

six_speed_demon 11-01-2012 02:01 PM

Quote:

Originally Posted by wheatboy (Post 10995112)
Hell ya man!!! Beautiful Build!

Thanks! :highfive:

MyK20Z3 11-01-2012 02:27 PM

Damn beastly Si. Thing looks beautiful! Why not take off the splash guards and front license plate though and maybe get at least the rear HFP lip? Still a sick car tho bro props


All times are GMT -4. The time now is 02:24 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.

copyright 8thcivic.com - all rights reserved