little help from anyone in westchester. ny

***nyblksi*** · 05-15-2007, 09:41 AM

I ordered the hondata img along with the throttle gasket and injen cai. Everything should be here later this week and I was wondering if anyone in or near westchester, ny could give me a lil help with the hondata img install.

I could drive to meet you if ud like. If anyone is interested lemme know. Thanks

***nyblksi*** · 05-15-2007, 08:27 PM

06blaksi · 05-15-2007, 08:50 PM

hmmmmmm.....let me see what my plans are for this Saturday

jay3151 · 05-15-2007, 08:53 PM

dude thats a bitch to do. atleast for my i was able to go it when the front end was off, my front end inc radiator support and everything only thing u can see if the engine in front of you. i took advantage from my accident to get it done.

good luck and start early just incase u get stuck

***nyblksi*** · 05-15-2007, 09:00 PM

Quote:

Originally Posted by jay3151

dude thats a bitch to do. atleast for my i was able to go it when the front end was off, my front end inc radiator support and everything only thing u can see if the engine in front of you. i took advantage from my accident to get it done.

good luck and start early just incase u get stuck

i looked at the DIY thread on this and its looks like its gonna be a pain in the ass

jay3151 · 05-15-2007, 09:10 PM

i biggest recomendation is to take your time and start early. go ahead and attempt to do it. by the end of the day u still havent figured it out u can put it back to norm so that u can leave.

even w the front end off i had to paly w the intake manifold and loosen the bracket holding the alternator and use a pry bar so i could wiggle the intake manifold off. but i didnt read the DIY either maybe i should of done that before.

RPM · 05-15-2007, 09:12 PM

We did mine and you pretty much need to rip the hole front end off it's a bitch to do...It will take hours to do and get yourself some coolent from honda your going to need it...Good luck...

***nyblksi*** · 05-15-2007, 09:18 PM

damn i kinda dont feel like doing it now if its gonna be such a pain like u guys say lol

Type X · 05-15-2007, 09:28 PM

pay a shop.

jay3151 · 05-15-2007, 09:37 PM

when I first planned to do it I was going to do it in 2days w a friend. cuz we would buy a case of beer and work. it just takes time. I would attempt the job before paying some one else. you'll do fine as long as you take your time. when are you planning to do it? if you try to diy ill try to stop by and lend a hand.

jay3151 · 05-15-2007, 09:39 PM

i have jackstands and a floor jack to lend if needed.

***nyblksi*** · 05-15-2007, 09:44 PM

Quote:

Originally Posted by jay3151

i have jackstands and a floor jack to lend if needed.

thanks but i actually bought those last week

i haven't received the img yet, it should be here 2morrow or thrus hopefully. So id prob say maybe sometime next week cuz imma be busy this weekend.

05-15-2007, 09:41 AM	#1 (permalink)
*nyblksi* VIP Member Join Date: May 2006 Location: Yonkers, NY Age: 25 Posts: 883 Eric iTrader: 7 / 100%	little help from anyone in westchester. ny I ordered the hondata img along with the throttle gasket and injen cai. Everything should be here later this week and I was wondering if anyone in or near westchester, ny could give me a lil help with the hondata img install. I could drive to meet you if ud like. If anyone is interested lemme know. Thanks

05-15-2007, 08:27 PM	#2 (permalink)
*nyblksi* VIP Member Join Date: May 2006 Location: Yonkers, NY Age: 25 Posts: 883 Eric iTrader: 7 / 100%	__________________ 06 NHBP SI

05-15-2007, 09:18 PM	#8 (permalink)
*nyblksi* VIP Member Join Date: May 2006 Location: Yonkers, NY Age: 25 Posts: 883 Eric iTrader: 7 / 100%	damn i kinda dont feel like doing it now if its gonna be such a pain like u guys say lol __________________ 06 NHBP SI

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Westchester Area: tire place recommendation	jay3151	North-East	4	04-03-2007 06:46 PM
Southern Westchester, NY meet (testing waters)	xmx250	North-East	31	02-21-2007 06:18 PM
Westchester PA meet OFFICIAL PIX! (12/17/06)	06Fg2	Introduction & Pictures	48	01-08-2007 03:05 PM
Another....Westchester PA meet gallery	Type X	Introduction & Pictures	32	12-26-2006 10:10 PM
Westchester, NY	06blaksi	Water Cooler	4	11-07-2006 08:13 PM

05-15-2007, 08:50 PM	#3 (permalink)
06blaksi Senior Member Member Join Date: Apr 2006 Location: in teh basement Age: 41 Posts: 49,431 iTrader: 23 / 100%	hmmmmmm.....let me see what my plans are for this Saturday

05-15-2007, 08:53 PM	#4 (permalink)
jay3151 Senior Member Join Date: May 2006 Location: Westchester NY Age: 26 Posts: 2,063 Juan Carlos iTrader: 8 / 100%	dude thats a bitch to do. atleast for my i was able to go it when the front end was off, my front end inc radiator support and everything only thing u can see if the engine in front of you. i took advantage from my accident to get it done. good luck and start early just incase u get stuck

05-15-2007, 09:10 PM	#6 (permalink)
jay3151 Senior Member Join Date: May 2006 Location: Westchester NY Age: 26 Posts: 2,063 Juan Carlos iTrader: 8 / 100%	i biggest recomendation is to take your time and start early. go ahead and attempt to do it. by the end of the day u still havent figured it out u can put it back to norm so that u can leave. even w the front end off i had to paly w the intake manifold and loosen the bracket holding the alternator and use a pry bar so i could wiggle the intake manifold off. but i didnt read the DIY either maybe i should of done that before.

05-15-2007, 09:12 PM	#7 (permalink)
RPM Senior Member Join Date: Dec 2006 Location: PA Posts: 135 Bobby iTrader: 0 / 0%	We did mine and you pretty much need to rip the hole front end off it's a bitch to do...It will take hours to do and get yourself some coolent from honda your going to need it...Good luck...

05-15-2007, 09:28 PM	#9 (permalink)
Type X Senior Member Member Join Date: Jan 2006 Age: 28 Posts: 3,117 iTrader: 16 / 100%	pay a shop.

05-15-2007, 09:37 PM	#10 (permalink)
jay3151 Senior Member Join Date: May 2006 Location: Westchester NY Age: 26 Posts: 2,063 Juan Carlos iTrader: 8 / 100%	when I first planned to do it I was going to do it in 2days w a friend. cuz we would buy a case of beer and work. it just takes time. I would attempt the job before paying some one else. you'll do fine as long as you take your time. when are you planning to do it? if you try to diy ill try to stop by and lend a hand.

05-15-2007, 09:39 PM	#11 (permalink)
jay3151 Senior Member Join Date: May 2006 Location: Westchester NY Age: 26 Posts: 2,063 Juan Carlos iTrader: 8 / 100%	i have jackstands and a floor jack to lend if needed.