Stainless Steel Clutch Cable

tite681 · 06-04-2008, 06:24 PM

Has anyone experienced Stainless Steel Clutch Cable on any car? I guess it works like SS brake lines. My buddy who installs the mods on my car swears by it. Says the pedal feel is way more dramatic than SS brake lines.

silverspoon1996 · 06-04-2008, 06:51 PM

you wont notice anything unless you have a stiffer Pressure plate.. I have a SS Clutch line.. and Brake lines.. I also have a upgraded clutch, pressure plate, and Flywheel.. I also have 4 piston calipers upfront..

Spoon Calipers.. the most impressive modification ive done to date.

radiocontrolhead · 06-04-2008, 06:55 PM

Quote:

Originally Posted by silverspoon1996

you wont notice anything unless you have a stiffer Pressure plate.. I have a SS Clutch line.. and Brake lines.. I also have a upgraded clutch, pressure plate, and Flywheel.. I also have 4 piston calipers upfront..

Spoon Calipers.. the most impressive modification ive done to date.

Do you have pictures of this amazing ride? How much were those calipers? I'm interested.

fg2!kid · 06-04-2008, 11:58 PM

hahah iam in for pics, SSlines for your clutch are only for feel just like they are on brakes
it will make it feel a little more ferm

Zeuceone · 06-05-2008, 12:09 AM

of spoon calipers.

Rolow · 06-05-2008, 12:49 AM

Quote:

Originally Posted by Zeuceone

of spoon calipers.

Finally a Nice weekend to work outside!!

fg2!kid · 06-05-2008, 01:01 AM

niiice...

xxbobbyxx · 06-05-2008, 10:56 AM

I upgraded my clutch and got a lightweight flywheel and keep blowing the clutch master cylinder out. So I had a SS clutch line made and put it in 2 weeks ago with a new CMC. So far so good but only time will tell.

rcrgrn312 · 10-25-2008, 10:17 AM

I would very much like to see a DIY for this cluth line mod. I have a corsport ss clutch line sitting on my kitchen counter and I'm completely lost as to where it goes. Cart before the horse, I suppose. Any assistance would be greatly appreciated.

***Blk_07_SI_Sedan*** · 10-25-2008, 01:32 PM

Is this stronger then the oem? I am assuming it would be. Where can one get this at? (the ss clutch cable)

rcrgrn312 · 10-25-2008, 01:48 PM

You can pick one up from a few different places. I got mine from CorsportUSA.com. Goodluck on your install. I'm still waiting on some kind of guidence to put mine on.

06-04-2008, 06:24 PM	#1 (permalink)
tite681 Senior Member Join Date: Aug 2007 Location: Hella SF Posts: 4,607 ButchMX! iTrader: 5 / 100%	Stainless Steel Clutch Cable Has anyone experienced Stainless Steel Clutch Cable on any car? I guess it works like SS brake lines. My buddy who installs the mods on my car swears by it. Says the pedal feel is way more dramatic than SS brake lines.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stainless Steel Brake Lines	MellowGato	Suspension and Brakes	6	07-22-2007 05:36 AM

06-04-2008, 06:51 PM	#2 (permalink)
silverspoon1996 Senior Member Join Date: Jan 2008 Location: Rockland County New York Age: 29 Posts: 1,006 JJ iTrader: 1 / 100%	you wont notice anything unless you have a stiffer Pressure plate.. I have a SS Clutch line.. and Brake lines.. I also have a upgraded clutch, pressure plate, and Flywheel.. I also have 4 piston calipers upfront.. Spoon Calipers.. the most impressive modification ive done to date.

06-04-2008, 11:58 PM	#4 (permalink)
fg2!kid Senior Member Join Date: Jun 2007 Location: montclair Cali Age: 22 Posts: 1,255 エリク eric iTrader: 0 / 0%	hahah iam in for pics, SSlines for your clutch are only for feel just like they are on brakes it will make it feel a little more ferm

06-05-2008, 12:09 AM	#5 (permalink)
Zeuceone Senior Member Join Date: Nov 2006 Age: 13 Posts: 97,747 iTrader: 49 / 100%	of spoon calipers.

06-05-2008, 01:01 AM	#7 (permalink)
fg2!kid Senior Member Join Date: Jun 2007 Location: montclair Cali Age: 22 Posts: 1,255 エリク eric iTrader: 0 / 0%	niiice...

06-05-2008, 10:56 AM	#8 (permalink)
xxbobbyxx Member Join Date: Oct 2006 Location: Florida Posts: 77 Bobby iTrader: 0 / 0%	I upgraded my clutch and got a lightweight flywheel and keep blowing the clutch master cylinder out. So I had a SS clutch line made and put it in 2 weeks ago with a new CMC. So far so good but only time will tell.

10-25-2008, 10:17 AM	#9 (permalink)
rcrgrn312 Junior Member Join Date: Feb 2008 Location: Goldsboro, NC Age: 24 Posts: 23 Jeff iTrader: 0 / 0%	I would very much like to see a DIY for this cluth line mod. I have a corsport ss clutch line sitting on my kitchen counter and I'm completely lost as to where it goes. Cart before the horse, I suppose. Any assistance would be greatly appreciated.

10-25-2008, 01:32 PM	#10 (permalink)
*Blk_07_SI_Sedan* Noob'ed up and Ready Join Date: Jun 2008 Location: Columbia, SC Age: 28 Posts: 1,142 Mike iTrader: 6 / 100%	Is this stronger then the oem? I am assuming it would be. Where can one get this at? (the ss clutch cable)

10-25-2008, 01:48 PM	#11 (permalink)
rcrgrn312 Junior Member Join Date: Feb 2008 Location: Goldsboro, NC Age: 24 Posts: 23 Jeff iTrader: 0 / 0%	You can pick one up from a few different places. I got mine from CorsportUSA.com. Goodluck on your install. I'm still waiting on some kind of guidence to put mine on.