stupid headlight problem, need help

dkaySI07 · 04-14-2008, 09:49 AM

Hey guys, im new to the site and i need help with a very stupid problem. I have a 07 si coupe and i wanted to replace the low beam headlights to something better so i decided to go with the PIAAs.

So i replaced the pass side headlight within 2 minutes but when i went to replace the driver side headlight it seemed like the bulb doesn't fit. IDK why but they are the 9006. it fits halfway in but doesn't "clip" all the way in. Its not the bulb itself so i assume its the headlight housing?

So i left the bulb in halfway because it is stuck in there but im just worried now that condensation will build up in my headlights. or when im driving and hit a big bump that the bulb will fly out lol.

i was wondering if anyone else had this same stupid problem or if it was just me. any input would help. Thanks in advance guys.

SoCal07Si · 04-14-2008, 09:51 AM

i installed the exact same bulbs.

It'll fit dude. It took like a effin hour for that one light, but it'll fit. I have the scars on my hands from the tight fit to prove it.

dragonzsoul · 04-14-2008, 09:53 AM

could it be that the base is too wide? i had a similar issue with my pilot HID 9006 bulbs.. i ended up filing the base so that it was narrower. fit like a charm after that

dkaySI07 · 04-14-2008, 10:04 AM

wow i just posted this question lol, u guys are quick!! anyway i have the scars on my hands too and im glad its not just me having the same problem. i guess i will attempt it again lol

***nycclaye*** · 04-14-2008, 10:06 AM

did you get it to fit?

SoCal07Si · 04-14-2008, 10:15 AM

Quote:

Originally Posted by nycclaye

did you get it to fit?

u ask, 2 minutes later? geez, let the guy put his shoes on!

dkaySI07 · 04-14-2008, 12:01 PM

lol so after about an hour of struggle i finally got it the click in all the way. i have no idea why such an easy mod became so difficult but it was worth it. thx for the help guys!!

SoCal07Si · 04-14-2008, 12:37 PM

***nycclaye*** · 04-14-2008, 04:37 PM

Quote:

Originally Posted by SoCal07Si

u ask, 2 minutes later? geez, let the guy put his shoes on!

lmao I didn't even look at the times smart a$$

04-14-2008, 09:49 AM	#1 (permalink)
dkaySI07 Junior Member Join Date: Apr 2008 Location: North New Jersey Posts: 9 Dave iTrader: 0 / 0%	stupid headlight problem, need help Hey guys, im new to the site and i need help with a very stupid problem. I have a 07 si coupe and i wanted to replace the low beam headlights to something better so i decided to go with the PIAAs. So i replaced the pass side headlight within 2 minutes but when i went to replace the driver side headlight it seemed like the bulb doesn't fit. IDK why but they are the 9006. it fits halfway in but doesn't "clip" all the way in. Its not the bulb itself so i assume its the headlight housing? So i left the bulb in halfway because it is stuck in there but im just worried now that condensation will build up in my headlights. or when im driving and hit a big bump that the bulb will fly out lol. i was wondering if anyone else had this same stupid problem or if it was just me. any input would help. Thanks in advance guys.

04-14-2008, 10:06 AM	#5 (permalink)
*nycclaye* VIP Member Join Date: Feb 2007 Location: Ft. Gordon, GA and Cols, OH Age: 26 Posts: 2,765 Nick iTrader: 1 / 100%	did you get it to fit? __________________ *I WIN YOU LOSE* *My monster* http://www.8thcivic.com/forums/intro...uild-pics.html [center]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stupid Cop!	leonphelpss11	Water Cooler	25	03-21-2008 12:37 PM
stupid question!!!	mischief316	Bolt-Ons And All-Motor	3	02-18-2008 06:51 PM
Stupid stupid friends..	TMR Net Shark	Water Cooler	19	01-25-2008 03:29 PM
JDM custom headlight lamps with LED highbean & custom aftermarket headlight lamps	JDMugen	Introduction & Pictures	4	01-05-2008 06:05 PM
Headlight Problem	dkatz	Mechanical Problems & Technical Chat	9	07-31-2007 11:17 AM

04-14-2008, 09:51 AM	#2 (permalink)
SoCal07Si Senior Member Join Date: Jan 2008 Location: Whitter, So Cali Age: 21 Posts: 12,145 Just call me Daddy iTrader: 1 / 100%	i installed the exact same bulbs. It'll fit dude. It took like a effin hour for that one light, but it'll fit. I have the scars on my hands from the tight fit to prove it.

04-14-2008, 09:53 AM	#3 (permalink)
dragonzsoul Senior Member Join Date: Apr 2008 Location: Cupertino Posts: 488 Brandon iTrader: 0 / 0%	could it be that the base is too wide? i had a similar issue with my pilot HID 9006 bulbs.. i ended up filing the base so that it was narrower. fit like a charm after that

04-14-2008, 10:04 AM	#4 (permalink)
dkaySI07 Junior Member Join Date: Apr 2008 Location: North New Jersey Posts: 9 Dave iTrader: 0 / 0%	wow i just posted this question lol, u guys are quick!! anyway i have the scars on my hands too and im glad its not just me having the same problem. i guess i will attempt it again lol

04-14-2008, 12:01 PM	#7 (permalink)
dkaySI07 Junior Member Join Date: Apr 2008 Location: North New Jersey Posts: 9 Dave iTrader: 0 / 0%	lol so after about an hour of struggle i finally got it the click in all the way. i have no idea why such an easy mod became so difficult but it was worth it. thx for the help guys!!

04-14-2008, 12:37 PM	#8 (permalink)
SoCal07Si Senior Member Join Date: Jan 2008 Location: Whitter, So Cali Age: 21 Posts: 12,145 Just call me Daddy iTrader: 1 / 100%