defouler installed.....CEL light still on!!

G-Ray · 01-13-2008, 06:30 PM

any 1 know how 2 get rid of the cel light???da thing is annoyin as hell just knowin it iz there n i cant get rid of it...ive been driving with it 4 a month now n just installed a defouler 2day but its still there......i know why its there(bcrh) but can it **** up my car??how do i get rid of it??? i just dont want it 2 be a liability just incase some thing were 2 happen later down tha road.

***divinebarrel*** · 01-13-2008, 06:32 PM

stupid question but u did reset the light after the install right?

**atruhondagrl** · 01-13-2008, 06:32 PM

Have you detached your neg battery cable and waited 15 minutes before reinstalling it yet?

What kind of header?

JZILLA · 01-13-2008, 06:35 PM

it will go away after you turn your car on and off about twenty times but I would just reset your ecu

G-Ray · 01-13-2008, 07:39 PM

no i didnt reset the light i dont know how. its a bcrh.. yes i disconnected the negative and how do i reset my ecu??

FG-JOE · 01-13-2008, 07:42 PM

leave it disconnected for about 10 minutes then turn on your car leave it running for about 10 minutes

***Freq18hz*** · 01-13-2008, 07:42 PM

disconnecting the neg battery terminal for 15 minutes resets the ECU.

You shouldn't still be getting the CEL if you installed it into the secondary 02 bung properly.

Which defouler are you using? Blox?

-Freq

jeremy0203 · 01-13-2008, 07:42 PM

go to autozone or similar and use their obd2 scanner

slostjoe · 01-13-2008, 08:24 PM

I did this and it cleared my CEL since day one i reset my ecu and i have a DCRH and have had no CEL in 2300mi.

G-Ray · 01-14-2008, 01:53 AM

i have a homemade defouler i bought on here and yes its the 2nd sensor , so i disconnect my negative for about 15 minutes right?? tnx guyz ima do it 1st thing in the morning

***portabuddy*** · 01-14-2008, 03:15 AM

i miss my cle... it was on for 9 months then i installed the defouler and it was gone... and at night the dash looked empty...

01-13-2008, 06:30 PM	#1 (permalink)
G-Ray Senior Member Join Date: Nov 2007 Location: denver Posts: 209 g-ray is my sons name iTrader: 1 / 100%	defouler installed.....CEL light still on!! any 1 know how 2 get rid of the cel light???da thing is annoyin as hell just knowin it iz there n i cant get rid of it...ive been driving with it 4 a month now n just installed a defouler 2day but its still there......i know why its there(bcrh) but can it **** up my car??how do i get rid of it??? i just dont want it 2 be a liability just incase some thing were 2 happen later down tha road.

01-13-2008, 06:32 PM	#2 (permalink)
*divinebarrel* Boink Join Date: Jul 2007 Location: Cheshire, CT Age: 23 Posts: 1,927 Nathan iTrader: 3 / 100%	stupid question but u did reset the light after the install right? __________________ NEC#26

01-13-2008, 06:32 PM	#3 (permalink)
atruhondagrl Kneel before Zod! Join Date: Apr 2006 Posts: 23,986 General Zod iTrader: 23 / 100%	Have you detached your neg battery cable and waited 15 minutes before reinstalling it yet? What kind of header? __________________ Rise before zod. AWD is RWD with training wheels.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BCRH installed yesterday with defouler... but	llckll	Bolt-Ons And All-Motor	24	08-29-2008 08:51 PM
CEL with race header installed	kt411gcn	Mechanical Problems & Technical Chat	13	08-20-2007 07:49 PM
Courtesy Light Install	J-Ro	Lighting, H.I.D.'s, & Neon	48	06-17-2007 10:06 PM
Light Help	Coop	Mechanical Problems & Technical Chat	3	04-11-2007 08:42 PM
DC race header - defouler cel light mod fix	jdmk20z3	Civic SI	1	04-04-2006 06:28 PM

01-13-2008, 06:35 PM	#4 (permalink)
JZILLA Senior Member Join Date: Jan 2007 Location: michigan Posts: 322 iTrader: 1 / 100%	it will go away after you turn your car on and off about twenty times but I would just reset your ecu

01-13-2008, 07:39 PM	#5 (permalink)
G-Ray Senior Member Join Date: Nov 2007 Location: denver Posts: 209 g-ray is my sons name iTrader: 1 / 100%	no i didnt reset the light i dont know how. its a bcrh.. yes i disconnected the negative and how do i reset my ecu??

01-13-2008, 07:42 PM	#6 (permalink)
FG-JOE Senior Member Join Date: Oct 2007 Location: Bakersfield Age: 18 Posts: 578 Joseph iTrader: 12 / 100%	leave it disconnected for about 10 minutes then turn on your car leave it running for about 10 minutes

01-13-2008, 07:42 PM	#7 (permalink)
*Freq18hz* car salesman beware Join Date: Feb 2007 Posts: 863 iTrader: 0 / 0%	disconnecting the neg battery terminal for 15 minutes resets the ECU. You shouldn't still be getting the CEL if you installed it into the secondary 02 bung properly. Which defouler are you using? Blox? -Freq

01-13-2008, 07:42 PM	#8 (permalink)
jeremy0203 Senior Member Member Join Date: Jun 2007 Location: Saint Marys, GA Age: 23 Posts: 2,427 Jeremy iTrader: 6 / 100%	go to autozone or similar and use their obd2 scanner

01-13-2008, 08:24 PM	#9 (permalink)
slostjoe Senior Member Join Date: Apr 2007 Location: Springfield, MO Posts: 3,804 Skyler iTrader: 4 / 100%	I did this and it cleared my CEL since day one i reset my ecu and i have a DCRH and have had no CEL in 2300mi.

01-14-2008, 01:53 AM	#10 (permalink)
G-Ray Senior Member Join Date: Nov 2007 Location: denver Posts: 209 g-ray is my sons name iTrader: 1 / 100%	i have a homemade defouler i bought on here and yes its the 2nd sensor , so i disconnect my negative for about 15 minutes right?? tnx guyz ima do it 1st thing in the morning

01-14-2008, 03:15 AM	#11 (permalink)
*portabuddy* The McGyver ofall McGyves Join Date: Jun 2007 Location: Mississauga Ontario Age: 23 Posts: 4,549 Bart Koscow iTrader: 6 / 100%	i miss my cle... it was on for 9 months then i installed the defouler and it was gone... and at night the dash looked empty...