TWM short shifter

yoyosupmang · 12-06-2007, 07:52 PM

Just installed the TWM short shifter. Easiest install yet. Took me less than 20 minutes. First of I like to say that if you have on 2007 SI, when it says pull the black piece up and back to remove, there is a little screw you need to take out first. I don't know if the 06 SI has the screw but the 07 does. After driving it feels so much better. I usually get the 2nd to 3rd gear grinds but now it feels so much shorter and barely could feel the notchyness. There is a little but not even noticeable. If you have 70 dollars to spend, I recommend getting the TWM short shifter. Combined with the skunk2 knob, it feels flawless.

I Vtec, do you? · 12-06-2007, 08:05 PM

So is there a problem you encountered with it?

yoyosupmang · 12-06-2007, 08:26 PM

Just remember to take the little screw off before attempting to remove the black piece after the silver benzel. It looks complicated but is very easy.

I Vtec, do you? · 12-06-2007, 08:30 PM

I was looking at SS kits yesterday and I'm really torn. What made you get the TWM over the comptech?

drunkrusski101 · 12-06-2007, 10:08 PM

I got one too, I didn't have any shift grinds for couple week but they came back.

yoyosupmang · 12-06-2007, 10:10 PM

twm has bushings combo too, comptech didnt. they both work the same

12-06-2007, 07:52 PM	#1 (permalink)
yoyosupmang Senior Member Join Date: Oct 2007 Posts: 199 iTrader: 0 / 0%	TWM short shifter Just installed the TWM short shifter. Easiest install yet. Took me less than 20 minutes. First of I like to say that if you have on 2007 SI, when it says pull the black piece up and back to remove, there is a little screw you need to take out first. I don't know if the 06 SI has the screw but the 07 does. After driving it feels so much better. I usually get the 2nd to 3rd gear grinds but now it feels so much shorter and barely could feel the notchyness. There is a little but not even noticeable. If you have 70 dollars to spend, I recommend getting the TWM short shifter. Combined with the skunk2 knob, it feels flawless.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TWM Shifter Cable Bushings	TWM Performance	TWM Performance Short Shifters	0	03-19-2007 06:14 PM
TWM Short Shifter Boxing Week Blowout!	TWM Performance	TWM Performance Short Shifters	32	01-08-2007 11:30 AM
Received TWM Short Shifter and Bushings today!!! (pics)	[IVI]	Bolt-Ons And All-Motor	8	10-10-2006 10:09 PM
TWM Short Shifter + Bushing Installed	Shiznet	Bolt-Ons And All-Motor	2	10-05-2006 12:27 PM

12-06-2007, 08:05 PM	#2 (permalink)
I Vtec, do you? Senior Member Join Date: Jan 2007 Location: MN Age: 19 Posts: 8,564 Jeremy iTrader: 11 / 100%	So is there a problem you encountered with it?

12-06-2007, 08:26 PM	#3 (permalink)
yoyosupmang Senior Member Join Date: Oct 2007 Posts: 199 iTrader: 0 / 0%	Just remember to take the little screw off before attempting to remove the black piece after the silver benzel. It looks complicated but is very easy.

12-06-2007, 08:30 PM	#4 (permalink)
I Vtec, do you? Senior Member Join Date: Jan 2007 Location: MN Age: 19 Posts: 8,564 Jeremy iTrader: 11 / 100%	I was looking at SS kits yesterday and I'm really torn. What made you get the TWM over the comptech?

12-06-2007, 10:08 PM	#5 (permalink)
drunkrusski101 Senior Member Join Date: Jul 2007 Location: baltimore Age: 19 Posts: 540 Anton iTrader: 5 / 100%	I got one too, I didn't have any shift grinds for couple week but they came back.

12-06-2007, 10:10 PM	#6 (permalink)
yoyosupmang Senior Member Join Date: Oct 2007 Posts: 199 iTrader: 0 / 0%	twm has bushings combo too, comptech didnt. they both work the same