Fog Light Install Help asap

Way2Short · 11-30-2007, 05:29 PM

what in dogs name do I do with this red/white thing?

Way2Short · 11-30-2007, 05:47 PM

need help now.

***darna*** · 11-30-2007, 05:49 PM

is it k2 or oem fogs?

Way2Short · 11-30-2007, 05:52 PM

K2....

***ryryninja*** · 11-30-2007, 06:30 PM

That plugs into the 24 port harness that connects to the fuse box.

Way2Short · 11-30-2007, 07:14 PM

^^Can you please elaborate. which one is the 24 port harness? which one of the port does it go into?

***darna*** · 11-30-2007, 07:29 PM

hard to explain but check out no. 39 on the instruction.

http://www.collegehillshonda.com/ins...oglightkit.pdf

Way2Short · 11-30-2007, 07:33 PM

That would work and thats what I did but there isn't a blue plug like the red/white one I had. No blue one for the other side???????

Firestrife · 11-30-2007, 07:44 PM

The k2motors one does not need/have the other wires just put that in for now and all the other plugs and you'd be fine.

***Zeuceone*** · 11-30-2007, 07:46 PM

i think the blue plug on the stock fogs turns the fog indicator on the dash on. no need to worry they will still work

Way2Short · 11-30-2007, 07:50 PM

I did that and it still doesn't come on... I don't know what else to do.

***Zeuceone*** · 11-30-2007, 07:50 PM

did you install the fuse?

Way2Short · 11-30-2007, 07:51 PM

yes I have

Way2Short · 11-30-2007, 07:52 PM

Plug everything in on the outside and ground it. Inside the car, plug everthing up, put the red/white cord into the middle harness, grounded inside too.

***darna*** · 11-30-2007, 08:17 PM

pm mikey6p or call him, he's the k2 expert.

i'll pm u his #.

PhoR11 · 12-01-2007, 01:30 AM

If the wiring harness for your fogs is like the OEM harness (and I expect it is), then look at these pics from SonicK20Z's DIY Guide:
DIY: Install guide for OEM fogs...

He says it goes in the white harness below the brown wire.

Way2Short · 12-01-2007, 02:27 PM

Anyone else with K2 fogs on their car?

***ryryninja*** · 12-01-2007, 02:28 PM

Quote:

Originally Posted by Way2Short

Anyone else with K2 fogs on their car?

Yeah, I'm using the K2 harness. You have to make sure everything is plugged in from the harness. If that doesn't work then check all of your grounds.

Way2Short · 12-01-2007, 02:45 PM

^^Did you only plug in the red/white wire under the brown and black wire in the middle harness?

***ryryninja*** · 12-01-2007, 02:47 PM

Quote:

Originally Posted by Way2Short

^^Did you only plug in the red/white wire under the brown and black wire in the middle harness?

Yeah, it doesn't come with the 2 other wires that are supposed to plug into the harness.

1 wire gives you the dash indicator (not necessary)
1 wire i think controls when you can have the fogs on (this prevents you from having the fogs on with your parking lights or high beams)

11-30-2007, 05:29 PM	#1 (permalink)
Way2Short Senior Member Join Date: Mar 2006 Age: 21 Posts: 1,991 iTrader: 23 / 100%	Fog Light Install Help asap what in dogs name do I do with this red/white thing?

11-30-2007, 06:30 PM	#5 (permalink)
*ryryninja* fap n nap™ Join Date: Jan 2006 Location: monument teh washington Age: 23 Posts: 53,446 205whp 147tq :D iTrader: 38 / 100%	That plugs into the 24 port harness that connects to the fuse box. __________________ \|108K Miles\|I beat my tires harder than i beat my meat

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fog Light ???	miles10238	Lighting, H.I.D.'s, & Neon	4	08-02-2007 01:20 AM
fog light install question..........just look	hondasi006	Mechanical Problems & Technical Chat	0	07-07-2007 01:08 PM
Fog Light Install Help!	BlackCivic	California North	1	03-17-2007 05:56 PM
2007 Fog Light Install	slowmo9494	Civic SI	10	11-16-2006 10:55 AM

11-30-2007, 05:47 PM	#2 (permalink)
Way2Short Senior Member Join Date: Mar 2006 Age: 21 Posts: 1,991 iTrader: 23 / 100%	need help now.

11-30-2007, 05:49 PM	#3 (permalink)
*darna* WooooHooooo Join Date: Nov 2006 Location: Kanto Tinio Age: 34 Posts: 4,744 Ate Vi iTrader: 7 / 100%	is it k2 or oem fogs?

11-30-2007, 05:52 PM	#4 (permalink)
Way2Short Senior Member Join Date: Mar 2006 Age: 21 Posts: 1,991 iTrader: 23 / 100%	K2....

11-30-2007, 07:14 PM	#6 (permalink)
Way2Short Senior Member Join Date: Mar 2006 Age: 21 Posts: 1,991 iTrader: 23 / 100%	^^Can you please elaborate. which one is the 24 port harness? which one of the port does it go into?

11-30-2007, 07:29 PM	#7 (permalink)
*darna* WooooHooooo Join Date: Nov 2006 Location: Kanto Tinio Age: 34 Posts: 4,744 Ate Vi iTrader: 7 / 100%	hard to explain but check out no. 39 on the instruction. http://www.collegehillshonda.com/ins...oglightkit.pdf

11-30-2007, 07:33 PM	#8 (permalink)
Way2Short Senior Member Join Date: Mar 2006 Age: 21 Posts: 1,991 iTrader: 23 / 100%	That would work and thats what I did but there isn't a blue plug like the red/white one I had. No blue one for the other side???????

11-30-2007, 07:44 PM	#9 (permalink)
Firestrife Senior Member Join Date: May 2007 Location: Gainesville, FL Age: 20 Posts: 3,491 Keenan iTrader: 9 / 100%	The k2motors one does not need/have the other wires just put that in for now and all the other plugs and you'd be fine.

11-30-2007, 07:50 PM	#11 (permalink)
Way2Short Senior Member Join Date: Mar 2006 Age: 21 Posts: 1,991 iTrader: 23 / 100%	I did that and it still doesn't come on... I don't know what else to do.

11-30-2007, 07:51 PM	#13 (permalink)
Way2Short Senior Member Join Date: Mar 2006 Age: 21 Posts: 1,991 iTrader: 23 / 100%	yes I have

11-30-2007, 07:52 PM	#14 (permalink)
Way2Short Senior Member Join Date: Mar 2006 Age: 21 Posts: 1,991 iTrader: 23 / 100%	Plug everything in on the outside and ground it. Inside the car, plug everthing up, put the red/white cord into the middle harness, grounded inside too.

11-30-2007, 08:17 PM	#15 (permalink)
*darna* WooooHooooo Join Date: Nov 2006 Location: Kanto Tinio Age: 34 Posts: 4,744 Ate Vi iTrader: 7 / 100%	pm mikey6p or call him, he's the k2 expert. i'll pm u his #.

12-01-2007, 01:30 AM	#16 (permalink)
PhoR11 Senior Member Join Date: Oct 2007 Location: Oklahoma Age: 27 Posts: 589 Bradley iTrader: 0 / 0%	If the wiring harness for your fogs is like the OEM harness (and I expect it is), then look at these pics from SonicK20Z's DIY Guide: DIY: Install guide for OEM fogs... He says it goes in the white harness below the brown wire.

12-01-2007, 02:27 PM	#17 (permalink)
Way2Short Senior Member Join Date: Mar 2006 Age: 21 Posts: 1,991 iTrader: 23 / 100%	Anyone else with K2 fogs on their car?

12-01-2007, 02:45 PM	#19 (permalink)
Way2Short Senior Member Join Date: Mar 2006 Age: 21 Posts: 1,991 iTrader: 23 / 100%	^^Did you only plug in the red/white wire under the brown and black wire in the middle harness?