Shifter technical question

Cr8tive_leo · 07-15-2007, 10:35 PM

Hey all, just a techie type puzzling question...

I've searched a lot of threads, for this, and havent' been able to find any info anywhere to get me passed the next steps...

I want to change the shifter on an Auto Sedan. this is as far as I have gotten...

So here it sits... just the front bezel off...

Now what?

I've read somewhere there is a screw... where... I pryed each side apart to try to see the screw.. didn't see it...

Thanks to all who reply, appreciation towards this question will be greatlfully appreciated.

***Zeuceone*** · 07-15-2007, 10:38 PM

nvm...

Cr8tive_leo · 07-15-2007, 11:53 PM

nvm? Why do you say that? Twist which way?

Cr8tive_leo · 07-16-2007, 12:59 AM

Okay, so I looked again...

Automatic Shift Knob/Shifter Removal?

Still no clear answer, I see the pics on teh last post, it's off..

I am assuming part 20 is the grey silver plastic bottom wrap...Who knows, the diagram that is in that thread looks like speghetti, nothing like a shifter but maybe it's just me, I'll just take a hack saw to it and see what's what.

Cr8tive_leo · 07-16-2007, 01:38 AM

Okay, figured it out, thanks.

Will post a simple DIY for this with loads of pictures.. okay, a few more than what is here now.

Cr8tive_leo · 07-16-2007, 02:17 AM

DIY - Automatic Shift Knob Replacement

My DIY if anyone is interested... now I go sleep... wooZZzzzzzzzzzzzzzzzzzz

Cr8tive_leo · 07-16-2007, 02:19 AM

Please and thank you.

07-15-2007, 10:35 PM	#1 (permalink)
Cr8tive_leo Senior Member Join Date: Jan 2007 Location: Ontario, Canada Age: 40 Posts: 8,334 Adrian iTrader: 5 / 100%	Shifter technical question Hey all, just a techie type puzzling question... I've searched a lot of threads, for this, and havent' been able to find any info anywhere to get me passed the next steps... I want to change the shifter on an Auto Sedan. this is as far as I have gotten... So here it sits... just the front bezel off... Now what? I've read somewhere there is a screw... where... I pryed each side apart to try to see the screw.. didn't see it... Thanks to all who reply, appreciation towards this question will be greatlfully appreciated.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Short Shifter Question	wassup61	Civic SI	15	04-27-2007 03:46 PM
Shifter "T" Handle Question....	fuller083	Inside and Out	9	02-23-2007 06:04 PM
Comptech Short shifter.. Dumbest question ever!!	carlo_amacio	Mechanical Problems & Technical Chat	0	02-14-2007 10:27 PM
Comptech Short Shifter install question	HoustonSi06	Civic SI	21	02-09-2007 03:22 AM
technical question on differences in exhausts... (for R18)	koreth	Forced Induction And Nitrous	1	10-04-2006 08:44 PM

07-15-2007, 11:53 PM	#3 (permalink)
Cr8tive_leo Senior Member Join Date: Jan 2007 Location: Ontario, Canada Age: 40 Posts: 8,334 Adrian iTrader: 5 / 100%	nvm? Why do you say that? Twist which way?

07-16-2007, 12:59 AM	#4 (permalink)
Cr8tive_leo Senior Member Join Date: Jan 2007 Location: Ontario, Canada Age: 40 Posts: 8,334 Adrian iTrader: 5 / 100%	Okay, so I looked again... Automatic Shift Knob/Shifter Removal? Still no clear answer, I see the pics on teh last post, it's off.. I am assuming part 20 is the grey silver plastic bottom wrap...Who knows, the diagram that is in that thread looks like speghetti, nothing like a shifter but maybe it's just me, I'll just take a hack saw to it and see what's what.

07-16-2007, 01:38 AM	#5 (permalink)
Cr8tive_leo Senior Member Join Date: Jan 2007 Location: Ontario, Canada Age: 40 Posts: 8,334 Adrian iTrader: 5 / 100%	Okay, figured it out, thanks. Will post a simple DIY for this with loads of pictures.. okay, a few more than what is here now.

07-16-2007, 02:17 AM	#6 (permalink)
Cr8tive_leo Senior Member Join Date: Jan 2007 Location: Ontario, Canada Age: 40 Posts: 8,334 Adrian iTrader: 5 / 100%	DIY - Automatic Shift Knob Replacement My DIY if anyone is interested... now I go sleep... wooZZzzzzzzzzzzzzzzzzzz

07-16-2007, 02:19 AM	#7 (permalink)
Cr8tive_leo Senior Member Join Date: Jan 2007 Location: Ontario, Canada Age: 40 Posts: 8,334 Adrian iTrader: 5 / 100%	Please and thank you.