How to put injectors in fuel rail?

adamhoud · 03-18-2007, 08:04 PM

Can someone help me with this, when i took the fuel rail out, two of the injectors stayed in the rail, and two stayed in the manifold. I need to know how to put the injectors back into the fuel rail.

Black_civic_Si · 03-18-2007, 08:09 PM

just give them a tug, it should work.

honda06si · 03-18-2007, 08:12 PM

Quote:

Originally Posted by Black_civic_Si

just give them a tug, it should work.

adamhoud · 03-18-2007, 08:16 PM

No i mean, they are pulled out, think rail with two open spots and two injectors that need to go into the rail, not the manifold. I try to push them in, it doesn't seem to go.

Wait, I found it BCJ used dialectric grease.

Black_civic_Si · 03-18-2007, 08:21 PM

have you try putting the injector in first on the manifold, then go put the fuel rail second.

adamhoud · 03-18-2007, 08:39 PM

Doesnt work, with enough twisting I was able to get them in the rail.

blueroadster · 03-18-2007, 08:50 PM

Search is your friend

Did you remove the clips?

BATANG CITY JAIL · 03-18-2007, 09:01 PM

Quote:

Originally Posted by adamhoud

No i mean, they are pulled out, think rail with two open spots and two injectors that need to go into the rail, not the manifold. I try to push them in, it doesn't seem to go.

Wait, I found it BCJ used dialectric grease.

no not me... its blueroadster....

sorry eric..

adamhoud · 03-18-2007, 09:08 PM

I got them in thanks everyone.

03-18-2007, 08:04 PM	#1 (permalink)
adamhoud Senior Member Join Date: Sep 2006 Location: Bay Area, CA Posts: 1,030 Adam iTrader: 3 / 100%	How to put injectors in fuel rail? Can someone help me with this, when i took the fuel rail out, two of the injectors stayed in the rail, and two stayed in the manifold. I need to know how to put the injectors back into the fuel rail.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"Check Fuel Cap" - Merged Threads	HardBoiler	Mechanical Problems & Technical Chat	109	09-07-2008 10:04 PM
OEM Acura RDX Fuel Injectors....	skittleslegend	Forced Induction And Nitrous	58	07-13-2008 05:02 AM
Fuel Pump installation	RomesKdUB	Forced Induction And Nitrous	29	01-16-2007 12:30 PM
AEM fuel rail??	Conrad	Forced Induction And Nitrous	4	08-02-2006 10:18 AM
Segmented Fuel display	taste	Civic Coupe And Sedan	19	06-15-2006 12:41 AM

03-18-2007, 08:09 PM	#2 (permalink)
Black_civic_Si Senior Member Join Date: May 2006 Location: Oakland, Bay Area Posts: 958 iTrader: 2 / 100%	just give them a tug, it should work.

03-18-2007, 08:16 PM	#4 (permalink)
adamhoud Senior Member Join Date: Sep 2006 Location: Bay Area, CA Posts: 1,030 Adam iTrader: 3 / 100%	No i mean, they are pulled out, think rail with two open spots and two injectors that need to go into the rail, not the manifold. I try to push them in, it doesn't seem to go. Wait, I found it BCJ used dialectric grease.

03-18-2007, 08:21 PM	#5 (permalink)
Black_civic_Si Senior Member Join Date: May 2006 Location: Oakland, Bay Area Posts: 958 iTrader: 2 / 100%	have you try putting the injector in first on the manifold, then go put the fuel rail second.

03-18-2007, 08:39 PM	#6 (permalink)
adamhoud Senior Member Join Date: Sep 2006 Location: Bay Area, CA Posts: 1,030 Adam iTrader: 3 / 100%	Doesnt work, with enough twisting I was able to get them in the rail.

03-18-2007, 08:50 PM	#7 (permalink)
blueroadster Senior Member Member Join Date: Aug 2006 Location: Maryland Posts: 3,573 iTrader: 7 / 100%	Search is your friend Did you remove the clips?

03-18-2007, 09:08 PM	#9 (permalink)
adamhoud Senior Member Join Date: Sep 2006 Location: Bay Area, CA Posts: 1,030 Adam iTrader: 3 / 100%	I got them in thanks everyone.