C-pillar vibration behind SRS cover

Occidio · 01-23-2007, 12:52 PM

Hi all:

I did a search but couldn't find the solution. Seems everyone is having the subwoofer vibration or a loose rear deck.

I have a 2006 coupe and I have an anoying high frequency vibration comming from behind the passenger side c-pillar SRS cover.

When I press down hard on the SRS cover, the sound disapears.

My question(s) are:

1) Has anyone else had this problem
2) How do I get the cover off to figure out what the problem is?

I have been able to snap out the bottom half of the cover but the top half doesn't seem to want to come off. Do I just need more force?

I tried sending it to a dealer but they didn't solve the problem the first time around. I'm pretty mechanically inclined so I thought I would just do it myself.

Any help is appreciated.

VelociRacer · 01-24-2007, 10:15 AM

Same problem here, 06 LX Sedan (Canadian-made). I would get my hands on the Helm service manual, opens the door for alot of DIY.

Occidio · 01-24-2007, 01:51 PM

I was hoping to wait a few years before having to pick one of those up! Looks like I might have to do my investment a little earlier.

I did manage to pry the cover off a bit and noticed a large wire going over the air bag. I've tried moving it around but I would rather tape it down or wrap some EPT around it.

Other people must have this problem too, fess up folks! :)

01-23-2007, 12:52 PM	#1 (permalink)
Occidio Junior Member Join Date: Jun 2006 Posts: 5 iTrader: 0 / 0%	C-pillar vibration behind SRS cover Hi all: I did a search but couldn't find the solution. Seems everyone is having the subwoofer vibration or a loose rear deck. I have a 2006 coupe and I have an anoying high frequency vibration comming from behind the passenger side c-pillar SRS cover. When I press down hard on the SRS cover, the sound disapears. My question(s) are: 1) Has anyone else had this problem 2) How do I get the cover off to figure out what the problem is? I have been able to snap out the bottom half of the cover but the top half doesn't seem to want to come off. Do I just need more force? I tried sending it to a dealer but they didn't solve the problem the first time around. I'm pretty mechanically inclined so I thought I would just do it myself. Any help is appreciated.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: JDM engine cover	Sion0x	Engine	89	11-22-2008 09:33 PM
Vibration in clutch pedal?	SonicK20Z	Mechanical Problems & Technical Chat	9	09-10-2007 12:04 AM
How to open right side mirror cover...	salimans	Civic Coupe And Sedan	2	10-31-2006 12:29 PM
JDM Valve Cover	k-series	Do It Yourself Articles	21	08-04-2006 10:02 PM
Modify cup holder cover?	letsgoflyers81	Inside and Out	21	07-19-2006 08:04 PM

01-24-2007, 10:15 AM	#2 (permalink)
VelociRacer Member Join Date: Sep 2006 Location: Windsor-Detroit Posts: 33 iTrader: 0 / 0%	Same problem here, 06 LX Sedan (Canadian-made). I would get my hands on the Helm service manual, opens the door for alot of DIY.

01-24-2007, 01:51 PM	#3 (permalink)
Occidio Junior Member Join Date: Jun 2006 Posts: 5 iTrader: 0 / 0%	I was hoping to wait a few years before having to pick one of those up! Looks like I might have to do my investment a little earlier. I did manage to pry the cover off a bit and noticed a large wire going over the air bag. I've tried moving it around but I would rather tape it down or wrap some EPT around it. Other people must have this problem too, fess up folks! :)