any ideas?

SLVRK20 · 10-09-2006, 10:51 PM

well i painted my calipers yesterday, and it was very well done, but when i got home, i noticed on one of my wheels mass amount of rust on brake disc or the rotor part of my brakes. when i rub it, it does come off, any way to help this problem? what should i wash it off with or what should i do.. i may be rust proof but i have no idea

***GETxERxDONE*** · 10-10-2006, 07:14 PM

rotors rust..quick..just gotta live with it or drive it more

stevenshizzle · 10-10-2006, 09:21 PM

I would VTEC it all the way to 130 MPH and then apply about 80% brake pressure all the way to 4MPH. That will clear it.

radiocontrolhead · 10-10-2006, 10:30 PM

LMFOA!!!!!!!!! good stuff steven.

10-09-2006, 10:51 PM	#1 (permalink)
SLVRK20 Member Join Date: Jul 2006 Location: Hamilton Ontario Canada Posts: 78 iTrader: 0 / 0%	any ideas? well i painted my calipers yesterday, and it was very well done, but when i got home, i noticed on one of my wheels mass amount of rust on brake disc or the rotor part of my brakes. when i rub it, it does come off, any way to help this problem? what should i wash it off with or what should i do.. i may be rust proof but i have no idea

10-10-2006, 07:14 PM	#2 (permalink)
*GETxERxDONE* VIP Member Join Date: Sep 2006 Location: Birmingham, Alabama Age: 22 Posts: 8,223 Nick iTrader: 3 / 100%	rotors rust..quick..just gotta live with it or drive it more __________________ DIY HFP Front Lip Overlay CHEAP! \| DIY HFP Side Skirt installation DIY AUTO Shift knob Removal \| DIY E-Brake Trim removal

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any ideas...	(IVI)	Inside and Out	0	09-06-2006 08:30 AM
need a stock broker... any ideas?	Jrfish007	Water Cooler	7	08-23-2006 02:02 PM
ideas for a broward - dade meet	sickyute	South	16	07-07-2006 08:47 AM
Ideas for Amp Placement	bikinpunk	I.C.E., Electrical, Security, & Navigation	20	06-24-2006 07:49 PM
Ideas for a different shift boot?	bradvb	Inside and Out	11	05-04-2006 12:25 PM

10-10-2006, 09:21 PM	#3 (permalink)
stevenshizzle Senior Member Join Date: Sep 2006 Location: Belleville, IL Age: 23 Posts: 793 Steven iTrader: 0 / 0%	I would VTEC it all the way to 130 MPH and then apply about 80% brake pressure all the way to 4MPH. That will clear it.

10-10-2006, 10:30 PM	#4 (permalink)
radiocontrolhead Senior Member Join Date: Apr 2006 Location: Hollywood, ca Age: 21 Posts: 2,927 Danny iTrader: 0 / 0%	LMFOA!!!!!!!!! good stuff steven.