front suspension making squeeking noises

bulit184 · 05-12-2009, 10:40 PM

so a few weeks ago i attempted installing my pro kit. i ended up taking everything out then putting the stock in cause it was already getting dark out and i didnt have the right tools. put everything back to stock. after this i noticed the suspension making squeeking noises after going over any small bump or dip in the road. its really annoying. anyone know why its doing this?

***ocdcivic*** · 05-12-2009, 10:48 PM

Did you ensure everything was re-tightened properly? Did you re-align the springs on the perches correctly? Lots of variables especially when you said you don't have the right tools.

bulit184 · 05-13-2009, 10:16 PM

im pretty sure i did everything correctly...

05-12-2009, 10:40 PM	#1 (permalink)
bulit184 Senior Member Join Date: Mar 2008 Location: West Hills, CA Posts: 1,114 Razmataz iTrader: 0 / 0%	front suspension making squeeking noises so a few weeks ago i attempted installing my pro kit. i ended up taking everything out then putting the stock in cause it was already getting dark out and i didnt have the right tools. put everything back to stock. after this i noticed the suspension making squeeking noises after going over any small bump or dip in the road. its really annoying. anyone know why its doing this?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
brakes making funny noises?	black07coupe	Mechanical Problems & Technical Chat	9	11-14-2008 06:54 PM
suspension noises?	brussolino	Civic SI	6	09-05-2008 04:36 PM
Driver's seat is making noises at me!	Englishe30	Mechanical Problems & Technical Chat	4	05-12-2008 05:09 PM
Front Underbody Spoiler, can this be making strange noises????	SHRSTYL	Mechanical Problems & Technical Chat	2	02-13-2007 11:16 AM
Wheelspin - suspension noises	gpennino	Mechanical Problems & Technical Chat	7	09-10-2006 03:57 AM

05-12-2009, 10:48 PM	#2 (permalink)
*ocdcivic* Getting ready for winter. Join Date: Mar 2008 Location: C. Manor, NY (914) Posts: 2,740 Ray iTrader: 10 / 100%	Did you ensure everything was re-tightened properly? Did you re-align the springs on the perches correctly? Lots of variables especially when you said you don't have the right tools.

05-13-2009, 10:16 PM	#3 (permalink)
bulit184 Senior Member Join Date: Mar 2008 Location: West Hills, CA Posts: 1,114 Razmataz iTrader: 0 / 0%	im pretty sure i did everything correctly...