DIY Oem Fog Lights with Parking Lights/ 06si

[Xenin]

yeah i think thats what he means.

[inyong1988]

awesome DIY

[GGEX]

sounds like you got it. i just use some wire tapes that i picked up at autozone. theres few diff kinds i like those.

[WhiteSicivic06]

Wow, I was looking to do this as well. Im ordering fog lights soon so ill just do it at the same time I put em in. Glad someone finally figured this out though! Good job!

[06blaksi]

I'm gonna try this at 10:30 on my break...don't know if I'll finish or not. I'll also see if I can get clearer pics

[GGEX]

^^ if you can get better pics that would be awesome. my camera sux out load

[06blaksi]

I got some pics, some scratches and no working fogs.....what did I do?????? I only had 15 minutes so I still have wires exposed but I just did a test and nothing....I'll update after lunch

[06blaksi]

Here's a couple pics of what you're looking for...I hope nobody needs pics on how to splice wires...if you do...you're out of luck...lol

[GGEX]

in the first pic did you tap into the red/black wire? and did you tap the purple wire on the back end of the oem fog switch? and on the relay harness that red/white wire is a 12v constent, and the blue on is the neg that activates the relay. hope that helps

[06blaksi]

I took the red/white and tapped into the red/black then took the purple and tapped into the blue. I can hear the relay clicking when I connect the last wire (didn't remove fuse) but no lights...gonna check the fuse anyway just in case plus I went and got different connectors from maintenance. Lunch is in 30 minutes so I won't be rushed and I can do it right

[GGEX]

the red/white and the blue wire are gonna have to be cut. leave some to be tapped, or spliced into. i think that you have two 12v sources going though the relay right how and possible be burning it up. do the fogs come on as normal. like with the headlights on? and you might have fried the fuse. i went though alot trying to firgure this out

[ayenoc]

good job. nice write up..

[06blaksi]

Originally Posted by GGEX

the red/white and the blue wire are gonna have to be cut. leave some to be tapped, or spliced into. i think that you have two 12v sources going though the relay right how and possible be burning it up. do the fogs come on as normal. like with the headlights on? and you might have fried the fuse. i went though alot trying to firgure this out

Yea I cut those two and for the time being just took a male end and pushed them into the connectors where the red/black and purple are. The fogs don't work at all right now but I'm heading back out in a few minutes and see what I come up with. The good thing is everything can still be returned to the way it was if I have to but now I'm on a mission

[06blaksi]

I don't like that you can't edit posts in the DIY section. I have spare fuses and a spare relay if need be but i'm determined to get this working by 1:00

[Xenin]

sweet, i just got mine working. i accidentally cut the purple wire so i just tapped it back together. i managed to hit my e-brake handle with my plyers so now i have a chip on the plastic...boo.

[06blaksi]

Help!!!!!!!!!!!!!!!

I took the red/black and spliced it to the red/white
spliced purple to blue


no lights and fuse is good

[06blaksi]

an hour later and still nothing....I'm about to give up....I also lost all my accent lighting while doing this since my accents are hooked into my parking lights as well....10 more minutes then it goes back to the way it was...I'm aggravated now

[06blaksi]

I put them back to factory wiring and they work. I still have the wires I spliced in place but they won't work with just the parking lights

[GGEX]

did you tap into the wires that are at the top of the "T"

[Way2Short]

I think I might need your help