![]() |
|
|
|
#81 (permalink) | |
|
Senior Member
|
Quote:
|
|
|
|
|
|
|
#85 (permalink) |
|
Moderator
|
Alright, a little late but here they are. Dont judge the color of the fogs by the color of the headlights, they are Silverstars (Im to broke to do a retro and havent found an HID kit I like)
DRLs w/ fogs no flash ![]() DRLs w/ fogs w/ flash ![]() Driving lights w/ fogs no flash ![]() Driving lights w/ fogs w/ flash ![]() Parking lights w/ fogs no flash ![]() Parking lights w/ fogs w/ flash
|
|
|
|
|
|
#86 (permalink) |
|
thinkin about an RX-8?!?!
![]() |
wow... nice write up..
__________________
R.I.P. 06' Civic SI 07/16/07 http://www.8thcivic.com/forums/showt...b135cebbf8462& Slammed EG6.... |
|
|
|
|
|
#88 (permalink) |
|
Member
|
OK - I'm stumpted - I have the same harness as the one shown in the large pics in this thread - just 1 red/white stripe wire.
I connected it to a hot lead (ignition on) so I can run the fogs as drl's once I pull the #37 fuse. Ive also installed JDM projector lights.... Problem is the forgs worked at first - now nothing!!! I checked the fuses and they're OK I have power at the red/white wire but the relay doesn't seem to be getting any...Bad switch???, bad relay??? or another fuse I dont know about??? |
|
|
|
|
|
#90 (permalink) |
|
Member
|
OK - I'm having a bad time of this... I have everything installed....nothing works.
I got the K2 kit and it has only one red/white wire to get power and the blue 6 pin connector. I had it all hooked up and the relay was ckicking so I knew I was getting power but the lights wouldn't work. I removed the connector at the bumper and cleaned out the grease...was getting power to the lights - put it all back together, and now nothing - not even a click in the relay. I checked the fuse and its OK ----I have power in the red/white lead....what else could be wrong????????????????
|
|
|
|
|
|
#93 (permalink) |
|
Member
|
Yeah....and yeah.....
Saturday, I'm going to tear the whole thing down again and if I can't find the culprit, I'm going to wire in a Hella harness direct to the battery. I don't need a dash indicator and all the other extra crap, but I figured since it was a lease-mobile I would try to keep it as OEM as possible....Just could not fathom plunking down $225 for a set of fogs! |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Injen CAI install on R18 (lots of pics) | peliROJO | Engine | 102 | 05-29-2009 10:04 PM |
| XenonDepot HID Install Guide | unplugged | Lighting, H.I.D.'s, & Neon | 69 | 02-09-2009 11:45 AM |
| 2006 Civic Rear Speaker Install Guide | webby | Audio | 17 | 01-07-2009 10:46 PM |
| HID xenondepot install guide | webby | Lighting | 57 | 08-27-2008 08:07 PM |
| DIY install of new head unit in sedan UK/AUS | aussiebuddha | I.C.E., Electrical, Security, & Navigation | 4 | 04-04-2006 02:30 PM |