DIY: Install guide for OEM fogs... - Page 16

nycboy7 · 04-04-2008, 04:49 PM

can anyone tell me where to get the blue and red and white wire from to plug into the white harness? I have my whole dash ripped apart and i guess i am not understanding when he says take the blue and red and white and put into the white harness? where is he getting those wires from?

mrbill · 04-04-2008, 05:15 PM

You have an OEM foglight kit?
The switch harness provided with the kit.

(Download the instructions for the OEM foglight kit if you haven't already. They are available at collegehillshonda.)

-mr. bill

nycboy7 · 04-04-2008, 05:49 PM

no i ordered some from k2 motors...

Redelicious · 04-15-2008, 03:54 PM

does anyone hav the template for the coupe foglights that they can scan 4 me plzzzzzzzzz????

cambodianricer · 04-15-2008, 11:07 PM

Quote:

Originally Posted by Redelicious

does anyone hav the template for the coupe foglights that they can scan 4 me plzzzzzzzzz????

you dont even need them.

hey! you live in corona! maybe i can help you out since i did them my self too.

right before you install them adjust them. mine didnt come with the thingy to drill a hole

Redelicious · 04-16-2008, 01:45 AM

Quote:

Originally Posted by cambodianricer

you dont even need them.

hey! you live in corona! maybe i can help you out since i did them my self too.

right before you install them adjust them. mine didnt come with the thingy to drill a hole

4 realz u wanna help me out??!! that wud be sweet!! haha... actually i was plannin to get them installed at a shop, its near the corona public library, they gonna charge like $100

... but i had some hardware and template missing from my fog light kit, so i was gonna get all the stuff together before giving it to the shop... but hey if you got some spare time and wud like to work on mine, then im down 4 it

pm me...

cambodianricer · 04-16-2008, 01:47 AM

Quote:

Originally Posted by Redelicious

4 realz u wanna help me out??!! that wud be sweet!! haha... actually i was plannin to get them installed at a shop, its near the corona public library, they gonna charge like $100

... but i had some hardware and template missing from my fog light kit, so i was gonna get all the stuff together before giving it to the shop... but hey if you got some spare time and wud like to work on mine, then im down 4 it

pm me...

ahah yea. but im gonna be gone this fri, sat, sun. so im not too sure when.

i live between raney and CFIS

Redelicious · 04-16-2008, 01:51 AM

i went to raney, and my bro went to cfis, so im familiar with the area... i always work over the weekends, so it definately cant be then... jus lemme know whenever u got the time..

cambodianricer · 04-16-2008, 01:56 AM

Quote:

Originally Posted by Redelicious

i went to raney, and my bro went to cfis, so im familiar with the area... i always work over the weekends, so it definately cant be then... jus lemme know whenever u got the time..

iite. it'll probably be next week or the week after cause prom is next week.

i live on crestview and taylor by olive. you know where that is?

Redelicious · 04-16-2008, 02:06 AM

i know olive... not sure about the other streets, but they sound familiar, ill figure it out.. wow its prom time!!! hope u hav a good one!

cambodianricer · 04-17-2008, 01:09 AM

Quote:

Originally Posted by Redelicious

i know olive... not sure about the other streets, but they sound familiar, ill figure it out.. wow its prom time!!! hope u hav a good one!

hell yeaaa!

btw, do you know anyone by the name of anthony that drives a 240?

Redelicious · 04-17-2008, 02:34 AM

uhh i dont think so... i know a couple anthonys but they dont drive 240s... how wud i know him?

cambodianricer · 04-17-2008, 08:45 PM

Quote:

Originally Posted by Redelicious

uhh i dont think so... i know a couple anthonys but they dont drive 240s... how wud i know him?

i dont know? he knows alot of people in corona

dchz · 04-28-2008, 07:28 PM

great DIY!
imma buy mines today, and imma install them when i get them..
pictures right after that..

tda1337 · 04-30-2008, 09:24 PM

sigh.. i have mine, but im too much of a wimp at the moment to install em... sigh

08blk4drsi · 05-01-2008, 08:54 PM

Does any1 now how to get past the grill on the 08 si, i was cutting out the plastic plate you are sapose to but it wont come loose because of the grill part, doesna any1 know what i am sapose 2 do

hhtran1 · 05-07-2008, 07:14 PM

bump.

my yellow fogs wont worK! i have everything connected besides one useless 6 pin connector. everything is grounded and connected. the power of the fog light switch turns on so there is power... i have a fa5. what is the problem>!

mrbill · 05-07-2008, 07:37 PM

A swag, but I'm guessing the useless 6 pin connector is useful.

-mr. bill

monaymarlon · 05-09-2008, 05:00 PM

has anyone tried a k2 06-07 foglight kit on a 2008 ex?

because i tried installing mine and the fog lamps doesnt fit the entire socket.

Albert_Gomez · 05-13-2008, 11:16 PM

I have an 08 Si Coupe, which has the VSA switch right next to the mirror controls. I just bought these fog lights eBay Motors: 06-07 HONDA CIVIC COUPE 2DR CLEAR FOG LIGHT DX LX EX SI (item 350054808232 end time May-03-08 17:06:37 PDT)

I'm worried that since it doesn't specifically say 08 that they won't work. Collegehillshonda.com doesn't have the stalk on their page anymore, unless I just can't find it. I tried looking in both coupe and sedan and don't see it. If anyone knows anywhere else I can get this stalk please let me know.

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/lighting/13214-diy-install-guide-oem-fogs.html
Posted By	For	Type	Date
ClickProtect	This thread	Refback	02-25-2008 04:51 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	02-19-2008 10:29 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	02-11-2008 04:20 AM
Lighting [Archive] - 8th Generation Honda Civic Forum	This thread	Refback	02-06-2008 01:45 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	01-21-2008 10:41 PM
DIY/install index - LOOK HERE BEFORE ASKING FOR A DIY - 8th Generation Honda Civic Forum	This thread	Refback	01-19-2008 10:59 PM
DIY: Install guide for OEM fogs... - Page 7 - 8th Generation Honda Civic Forum	This thread	Refback	01-16-2008 07:27 PM
DIY/install index - LOOK HERE BEFORE ASKING FOR A DIY - 8th Generation Honda Civic Forum	This thread	Refback	01-01-2008 07:48 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	12-12-2007 05:18 PM
Fog lights install - Page 6 - 8th Generation Honda Civic Forum	This thread	Refback	12-09-2007 04:22 PM
8th Generation Honda Civic Forum	This thread	Refback	12-06-2007 10:54 AM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Injen CAI install on R18 (lots of pics)	peliROJO	Engine	102	05-29-2009 10:04 PM
XenonDepot HID Install Guide	unplugged	Lighting, H.I.D.'s, & Neon	69	02-09-2009 11:45 AM
2006 Civic Rear Speaker Install Guide	webby	Audio	17	01-07-2009 10:46 PM
HID xenondepot install guide	webby	Lighting	57	08-27-2008 08:07 PM
DIY install of new head unit in sedan UK/AUS	aussiebuddha	I.C.E., Electrical, Security, & Navigation	4	04-04-2006 02:30 PM

04-04-2008, 04:49 PM	#301 (permalink)
nycboy7 Senior Member Join Date: Jun 2007 Age: 20 Posts: 106 iTrader: 0 / 0%	can anyone tell me where to get the blue and red and white wire from to plug into the white harness? I have my whole dash ripped apart and i guess i am not understanding when he says take the blue and red and white and put into the white harness? where is he getting those wires from?

04-04-2008, 05:15 PM	#302 (permalink)
mrbill Senior Member Join Date: Nov 2005 Location: MA Posts: 486 iTrader: 1 / 100%	You have an OEM foglight kit? The switch harness provided with the kit. (Download the instructions for the OEM foglight kit if you haven't already. They are available at collegehillshonda.) -mr. bill

04-04-2008, 05:49 PM	#303 (permalink)
nycboy7 Senior Member Join Date: Jun 2007 Age: 20 Posts: 106 iTrader: 0 / 0%	no i ordered some from k2 motors...

04-15-2008, 03:54 PM	#304 (permalink)
Redelicious Senior Member Join Date: Aug 2007 Location: Corona, CA Posts: 143 FG crew #084 iTrader: 0 / 0%	does anyone hav the template for the coupe foglights that they can scan 4 me plzzzzzzzzz????

04-16-2008, 01:51 AM	#308 (permalink)
Redelicious Senior Member Join Date: Aug 2007 Location: Corona, CA Posts: 143 FG crew #084 iTrader: 0 / 0%	i went to raney, and my bro went to cfis, so im familiar with the area... i always work over the weekends, so it definately cant be then... jus lemme know whenever u got the time..

04-16-2008, 02:06 AM	#310 (permalink)
Redelicious Senior Member Join Date: Aug 2007 Location: Corona, CA Posts: 143 FG crew #084 iTrader: 0 / 0%	i know olive... not sure about the other streets, but they sound familiar, ill figure it out.. wow its prom time!!! hope u hav a good one!

04-17-2008, 02:34 AM	#312 (permalink)
Redelicious Senior Member Join Date: Aug 2007 Location: Corona, CA Posts: 143 FG crew #084 iTrader: 0 / 0%	uhh i dont think so... i know a couple anthonys but they dont drive 240s... how wud i know him?

04-28-2008, 07:28 PM	#314 (permalink)
dchz Junior Member Join Date: Mar 2008 Posts: 28 iTrader: 0 / 0%	great DIY! imma buy mines today, and imma install them when i get them.. pictures right after that..

04-30-2008, 09:24 PM	#315 (permalink)
tda1337 Senior Member Join Date: Oct 2007 Location: Waterbury, CT Posts: 1,476 Rick iTrader: 0 / 0%	sigh.. i have mine, but im too much of a wimp at the moment to install em... sigh

05-01-2008, 08:54 PM	#316 (permalink)
08blk4drsi Senior Member Join Date: Jan 2008 Location: Greensboro Age: 20 Posts: 3,918 Chris iTrader: 0 / 0%	Does any1 now how to get past the grill on the 08 si, i was cutting out the plastic plate you are sapose to but it wont come loose because of the grill part, doesna any1 know what i am sapose 2 do

05-07-2008, 07:14 PM	#317 (permalink)
hhtran1 Senior Member Join Date: Jan 2008 Location: Huntington Beach, CA Posts: 181 iTrader: 1 / 100%	bump. my yellow fogs wont worK! i have everything connected besides one useless 6 pin connector. everything is grounded and connected. the power of the fog light switch turns on so there is power... i have a fa5. what is the problem>!

05-07-2008, 07:37 PM	#318 (permalink)
mrbill Senior Member Join Date: Nov 2005 Location: MA Posts: 486 iTrader: 1 / 100%	A swag, but I'm guessing the useless 6 pin connector is useful. -mr. bill

05-09-2008, 05:00 PM	#319 (permalink)
monaymarlon Junior Member Join Date: Nov 2007 Posts: 8 iTrader: 0 / 0%	has anyone tried a k2 06-07 foglight kit on a 2008 ex? because i tried installing mine and the fog lamps doesnt fit the entire socket.

05-13-2008, 11:16 PM	#320 (permalink)
Albert_Gomez Senior Member Join Date: Apr 2008 Location: Miami, FL Age: 21 Posts: 111 Albert Gomez iTrader: 0 / 0%	I have an 08 Si Coupe, which has the VSA switch right next to the mirror controls. I just bought these fog lights eBay Motors: 06-07 HONDA CIVIC COUPE 2DR CLEAR FOG LIGHT DX LX EX SI (item 350054808232 end time May-03-08 17:06:37 PDT) I'm worried that since it doesn't specifically say 08 that they won't work. Collegehillshonda.com doesn't have the stalk on their page anymore, unless I just can't find it. I tried looking in both coupe and sedan and don't see it. If anyone knows anywhere else I can get this stalk please let me know.