DIY: Install guide for OEM fogs... - Page 13

R18Civic · 01-12-2008, 05:54 PM

i did the same thing too, but i think thats how alot of peoples are regardless of how much you cut it. but u can't even tell that theres a gap far away and up close....i'm just waiting to get m HFP Front and rear w/ mugen sides =]

efeliciano13 · 01-12-2008, 06:09 PM

true but i know it's like that and im picky lol. give me some solutions!!!!!!!
did you find the problem on yours yet?

R18Civic · 01-12-2008, 06:13 PM

lol nah its getting dark here so i'm going to wait till tomorrow morning, but don't worry i'm picky too, and after i cut mine and i was sanding....i sanded the other part and now i have a big sanded part near my foglight...it bothers me alot

efeliciano13 · 01-12-2008, 06:23 PM

lol that suck. i didnt even sand or file. i just made it smooth with the blade. i have a few cuts outside of the area but i suppose i did good lol. post a pic when your done and let us know what the prob was. peace.

R18Civic · 01-12-2008, 06:26 PM

lol i just posted it up on the Galaxy Grey Thread but here ya go

and i'll let you know as soon as possible, and i think i know what the problem is, its my ground near the passenger side, b/c my switch light comes on when i turn it on.

deyez137 · 01-13-2008, 06:33 PM

wow...I was doing my fogs, and I had to make my own screw to ground near the wiper fluid. later i was trying to figure out what is wrong, and i put a tester in the female 6 pin connector and there was a small spark. After that I am not getting any power to my fog light switch, and i was getting power before. I checked the wiring and the red/white wire, has power going from the white 20 pin connector, to the relay harness, and the other 3 connectors dont have any power. is this the relay that is the problem? I think i need a new one. im not getting any power anywhere after the relay. thanks....oh..i redid my ground , and grounded it to the other spot where there is two wires already grounded next to the wiper fluid tank...(thanks gui)!

stellyscivicsi · 01-14-2008, 10:49 PM

great diy i installed the smoked fogs on my nhbp coupe and a rock busted the passenger lense

maicivic · 01-18-2008, 06:01 PM

still cant figure out my harness.........

maicivic · 01-18-2008, 06:14 PM

pls help

blak06si · 01-23-2008, 02:46 PM

i got the fogs hooked on my car ...i took apart the interior to get acces to the fuse box but i don't know what do to......help ???? i cant figure how to plug my harness .....

SiAzul · 01-30-2008, 08:51 PM

anybody know where I can find the template to drill the hole? I bought Ebay lights and they didnt come with it. I got the install instructions from collegehillshonda.com but the template is not there

cambodianricer · 02-03-2008, 03:03 AM

is it possible to use the 06 kit on an 08?

qe2007 · 02-05-2008, 12:27 PM

Just installed OEM fogs this past weekend on my 08 4dr Si. I have the kit with the stalk switch and compared to the initial post with the coupe install- much easier!! Just plug and play.

Toughest part was reinstalling/aligning bumper back on-just need a buddy.

You don't need to take bumper off to align fogs on FA5 either

To avoid the aggravation, I would reccomend to just go factory

SiAzul · 02-05-2008, 03:50 PM

Anybody know the part number for the fog light switch on an 06? I want to pick one up from my local dealership but I want to call in the order

UPCivic · 02-06-2008, 11:09 AM

Also looking for a template. Willing to pay a reasonable price for a copy, image or pdf.

SiAzul · 02-06-2008, 11:19 AM

good luck, but you really dont need it, I did fine without it and just drilled the hole after the lights were in.

RainSi08 · 02-07-2008, 07:52 PM

Ok So i have a 08 Si and where the button You push out at the end for the fog lights... its being used by soem VSA so where do i put the button at ?? anyone

GreyK20 · 02-07-2008, 09:37 PM

should i get this
eBay Motors: 06-07 HONDA CIVIC 4D 4DR SI JDM FOG LIGHTS LIGHT YELLOW (item 310020049393 end time Feb-07-08 20:52:05 PST)

GreyK20 · 02-07-2008, 10:00 PM

bump....

GreyK20 · 02-08-2008, 05:55 AM

yo should i

01-14-2008, 10:49 PM	#247 (permalink)
stellyscivicsi Member Join Date: Nov 2007 Location: jennings la Posts: 94 matthew iTrader: 0 / 0%	grhh great diy i installed the smoked fogs on my nhbp coupe and a rock busted the passenger lense

01-18-2008, 06:01 PM	#248 (permalink)
maicivic Junior Member Join Date: Oct 2007 Posts: 9 iTrader: 0 / 0%	harness still cant figure out my harness.........

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/lighting/13214-diy-install-guide-oem-fogs.html
Posted By	For	Type	Date
ClickProtect	This thread	Refback	02-25-2008 05:51 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	02-19-2008 11:29 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	02-11-2008 05:20 AM
Lighting [Archive] - 8th Generation Honda Civic Forum	This thread	Refback	02-06-2008 02:45 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	01-21-2008 11:41 PM
DIY/install index - LOOK HERE BEFORE ASKING FOR A DIY - 8th Generation Honda Civic Forum	This thread	Refback	01-19-2008 11:59 PM
DIY: Install guide for OEM fogs... - Page 7 - 8th Generation Honda Civic Forum	This thread	Refback	01-16-2008 08:27 PM
DIY/install index - LOOK HERE BEFORE ASKING FOR A DIY - 8th Generation Honda Civic Forum	This thread	Refback	01-01-2008 08:48 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	12-12-2007 06:18 PM
Fog lights install - Page 6 - 8th Generation Honda Civic Forum	This thread	Refback	12-09-2007 05:22 PM
8th Generation Honda Civic Forum	This thread	Refback	12-06-2007 11:54 AM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
XenonDepot HID Install Guide	unplugged	Lighting, H.I.D.'s, & Neon	79	02-04-2010 04:23 PM
DIY: Injen CAI install on R18 (lots of pics)	peliROJO	Engine	120	02-03-2010 02:27 AM
HID xenondepot install guide	webby	Lighting	59	01-28-2010 03:44 PM
2006 Civic Rear Speaker Install Guide	webby	Audio	22	08-28-2009 06:57 PM
DIY install of new head unit in sedan UK/AUS	aussiebuddha	I.C.E., Electrical, Security, & Navigation	4	04-04-2006 03:30 PM

01-12-2008, 05:54 PM	#241 (permalink)
R18Civic Senior Member Join Date: Jan 2008 Location: NC Posts: 701 Nate iTrader: 5 / 100%	i did the same thing too, but i think thats how alot of peoples are regardless of how much you cut it. but u can't even tell that theres a gap far away and up close....i'm just waiting to get m HFP Front and rear w/ mugen sides =]

01-12-2008, 06:09 PM	#242 (permalink)
efeliciano13 Member Join Date: Jul 2007 Location: chicago Posts: 94 iTrader: 0 / 0%	true but i know it's like that and im picky lol. give me some solutions!!!!!!! did you find the problem on yours yet?

01-12-2008, 06:13 PM	#243 (permalink)
R18Civic Senior Member Join Date: Jan 2008 Location: NC Posts: 701 Nate iTrader: 5 / 100%	lol nah its getting dark here so i'm going to wait till tomorrow morning, but don't worry i'm picky too, and after i cut mine and i was sanding....i sanded the other part and now i have a big sanded part near my foglight...it bothers me alot

01-12-2008, 06:23 PM	#244 (permalink)
efeliciano13 Member Join Date: Jul 2007 Location: chicago Posts: 94 iTrader: 0 / 0%	lol that suck. i didnt even sand or file. i just made it smooth with the blade. i have a few cuts outside of the area but i suppose i did good lol. post a pic when your done and let us know what the prob was. peace.

01-12-2008, 06:26 PM	#245 (permalink)
R18Civic Senior Member Join Date: Jan 2008 Location: NC Posts: 701 Nate iTrader: 5 / 100%	lol i just posted it up on the Galaxy Grey Thread but here ya go and i'll let you know as soon as possible, and i think i know what the problem is, its my ground near the passenger side, b/c my switch light comes on when i turn it on.

01-13-2008, 06:33 PM	#246 (permalink)
deyez137 Junior Member Join Date: Nov 2007 Posts: 5 iTrader: 0 / 0%	wow...I was doing my fogs, and I had to make my own screw to ground near the wiper fluid. later i was trying to figure out what is wrong, and i put a tester in the female 6 pin connector and there was a small spark. After that I am not getting any power to my fog light switch, and i was getting power before. I checked the wiring and the red/white wire, has power going from the white 20 pin connector, to the relay harness, and the other 3 connectors dont have any power. is this the relay that is the problem? I think i need a new one. im not getting any power anywhere after the relay. thanks....oh..i redid my ground , and grounded it to the other spot where there is two wires already grounded next to the wiper fluid tank...(thanks gui)!

01-23-2008, 02:46 PM	#250 (permalink)
blak06si Senior Member Join Date: Jul 2007 Location: Laval Age: 20 Posts: 171 Steve iTrader: 0 / 0%	i got the fogs hooked on my car ...i took apart the interior to get acces to the fuse box but i don't know what do to......help ???? i cant figure how to plug my harness .....

01-30-2008, 08:51 PM	#251 (permalink)
SiAzul Senior Member Join Date: Jan 2007 Location: Durham, NC Age: 22 Posts: 4,649 Mario iTrader: 3 / 100%	anybody know where I can find the template to drill the hole? I bought Ebay lights and they didnt come with it. I got the install instructions from collegehillshonda.com but the template is not there

02-03-2008, 03:03 AM	#252 (permalink)
cambodianricer Senior Member Join Date: Dec 2007 Location: Nigeria Posts: 11,761 Jessica iTrader: 12 / 100%	is it possible to use the 06 kit on an 08?

02-05-2008, 12:27 PM	#253 (permalink)
qe2007 Member Join Date: Jan 2008 Location: New Market, Maryland Posts: 38 iTrader: 1 / 100%	Just installed OEM fogs this past weekend on my 08 4dr Si. I have the kit with the stalk switch and compared to the initial post with the coupe install- much easier!! Just plug and play. Toughest part was reinstalling/aligning bumper back on-just need a buddy. You don't need to take bumper off to align fogs on FA5 either To avoid the aggravation, I would reccomend to just go factory

02-05-2008, 03:50 PM	#254 (permalink)
SiAzul Senior Member Join Date: Jan 2007 Location: Durham, NC Age: 22 Posts: 4,649 Mario iTrader: 3 / 100%	Anybody know the part number for the fog light switch on an 06? I want to pick one up from my local dealership but I want to call in the order

02-06-2008, 11:09 AM	#255 (permalink)
UPCivic Junior Member Join Date: May 2007 Posts: 1 iTrader: 0 / 0%	Also looking for a template. Willing to pay a reasonable price for a copy, image or pdf.

02-06-2008, 11:19 AM	#256 (permalink)
SiAzul Senior Member Join Date: Jan 2007 Location: Durham, NC Age: 22 Posts: 4,649 Mario iTrader: 3 / 100%	good luck, but you really dont need it, I did fine without it and just drilled the hole after the lights were in.

02-07-2008, 07:52 PM	#257 (permalink)
RainSi08 Senior Member Join Date: Jan 2008 Location: SoCal Posts: 162 Drew iTrader: 9 / 100%	Ok So i have a 08 Si and where the button You push out at the end for the fog lights... its being used by soem VSA so where do i put the button at ?? anyone

02-07-2008, 09:37 PM	#258 (permalink)
GreyK20 Senior Member Join Date: Aug 2007 Location: 831 Posts: 3,247 iTrader: 13 / 100%	should i get this eBay Motors: 06-07 HONDA CIVIC 4D 4DR SI JDM FOG LIGHTS LIGHT YELLOW (item 310020049393 end time Feb-07-08 20:52:05 PST)

02-07-2008, 10:00 PM	#259 (permalink)
GreyK20 Senior Member Join Date: Aug 2007 Location: 831 Posts: 3,247 iTrader: 13 / 100%	bump....

02-08-2008, 05:55 AM	#260 (permalink)
GreyK20 Senior Member Join Date: Aug 2007 Location: 831 Posts: 3,247 iTrader: 13 / 100%	yo should i