DIY: Install guide for OEM fogs... - Page 11

maicivic · 11-26-2007, 08:12 PM

im planning to buy the fog lights from colleghills but i think its too overpriced, any suggestions? are those jdm fog lights from ebay any good? any seller that you guys can recommend. i have the lx 4dr

Gsnake · 11-28-2007, 07:37 PM

Quote:

Originally Posted by maicivic

im planning to buy the fog lights from colleghills but i think its too overpriced, any suggestions? are those jdm fog lights from ebay any good? any seller that you guys can recommend. i have the lx 4dr

I have a set of the K2motor ones from ebay and no complaints so far.

tda1337 · 11-28-2007, 08:52 PM

Quote:

Originally Posted by maicivic

im planning to buy the fog lights from colleghills but i think its too overpriced, any suggestions? are those jdm fog lights from ebay any good? any seller that you guys can recommend. i have the lx 4dr

do u have a coupe or sedan? if u have a coupe pm me and ill send u the vendor i plan on using for fog lights. Best rated one on ebay. And they are just as high quality as the honda ones, with GLASS lenses unlike some of the other ebay ones! the button even looks OEM!

Mookie469 · 12-02-2007, 06:54 PM

Hey man thanks for th DIY, it was really easy to follow, even if you dont have paper instructions....

Thanks once again.

campingkevin · 12-06-2007, 11:13 AM

the fog switch.. I got VSA there.. where can I place the fog switch now..?

yoshiod9 · 12-06-2007, 11:40 AM

this is the honda dealership i used when i lived up in sacramento. their internet prices are usually pretty decent (the fogs are on sale for $216.48 for all models except '08 Si's [like mine...dammit] when i checked today 12/6/2007) and they almost always have installation diagrams on the site. hth anyone looking for fogs.

Honda Civic Exterior Accessories- 2006 - 2007

maicivic · 12-17-2007, 08:27 PM

i have the same problem with k2 harness.
i cant figure out which connectors is going to where???

jackolee · 12-17-2007, 09:34 PM

1. I cant see what it looks like
2. It connects to the fuse box thing under the sterring wheel.(i might be mixing that up with one)
3. If you look under the steering wheel theres another brown plug under there
4. The switch will goes next to the VSA and if you dont have a place to put it go to honda and get one of those plastic things that holds 3 of those plugs
5. I cant see that .... but just zip tie that down somewhere
6.ground it somewhere under the steering wheel theres a metal bolt that you can connect it to.

tda1337 · 12-17-2007, 11:38 PM

psst, if u have VSA u need to get the steering wheel light stick/column with fog controls on it
otherwise u will loose your power window function

tda1337 · 12-17-2007, 11:39 PM

*mirror not window sorry its late at night

gui · 12-23-2007, 05:35 PM

HELP... I just bought the exact same 20-mini fuses that are already on the fuse box but I cant get it to fit into the #6 hole. It goes in about halfway and then is stuck, no matter how much force I use...

***stock?*** · 12-23-2007, 05:42 PM

Quote:

Originally Posted by campingkevin

the fog switch.. I got VSA there.. where can I place the fog switch now..?

Ok, i had the same problem. i dont know if this is something you would be interested in doing.. but i took my VSA button out of the little cluster by my mirrors. i relocated it down where that little cubby hole is directly under those buttons i cut a hole on the top of the hole exactly the same size as my vsa button that is where my vsa button lives now and put my fog switch in its place... bc some jack a$$ thought that the 06 and the 07 had the same button cluster.... ill take pix if your interested...

gui · 12-23-2007, 05:52 PM

Quote:

Originally Posted by gui

HELP... I just bought the exact same 20-mini fuses that are already on the fuse box but I cant get it to fit into the #6 hole. It goes in about halfway and then is stuck, no matter how much force I use...

anyone? im sitting in my garage with the laptop waiting for a solution lol... thats all i have left to do

***nighthawk06Si*** · 12-23-2007, 05:54 PM

sorry bro, i haven't installed mine yet so i can't help ya... thought someone else would of seen it by now.

***stock?*** · 12-23-2007, 05:55 PM

Quote:

Originally Posted by gui

anyone? im sitting in my garage with the laptop waiting for a solution lol... thats all i have left to do

hmm... didnt the kit come with the fuse?? mine went right in... try a different fuse... maybe one of the prongs are bent... its prolly something simple. go eat dinner and come back to it lol

gui · 12-23-2007, 06:12 PM

kit didnt come with the fuse for some reason, but i bought a pack of em at ace hardware and they are exactly the same ones that are already used for the rest of the fuse box.

is there a simple trick i am missing or something? are the prongs too long and need to be shortened or something?

***stock?*** · 12-23-2007, 06:14 PM

Quote:

Originally Posted by gui

kit didnt come with the fuse for some reason, but i bought a pack of em at ace hardware and they are exactly the same ones that are already used for the rest of the fuse box.

is there a simple trick i am missing or something? are the prongs too long and need to be shortened or something?

You have to watch too there are several different types of fuses. the ones that go in the #6 slot are the pretty tiny ones... take one out and compare them. see if one of the fuses that came with that stock fuse box are the same prong length and width.

gui · 12-23-2007, 06:21 PM

bingo, thats what it is... the fuse looks the same, but the prongs are too long on mine.. now i gotta go out and gvet some more

***stock?*** · 12-23-2007, 06:26 PM

Quote:

Originally Posted by gui

bingo, thats what it is... the fuse looks the same, but the prongs are too long on mine.. now i gotta go out and gvet some more

Hey hopefully you didnt leave yet. use one of your spares for the time being...

gui · 12-23-2007, 07:16 PM

i did already leave and go to three different stores and not find any.. what spares are you talking about?

12-23-2007, 05:54 PM	#214 (permalink)
*nighthawk06Si* VIP Member Join Date: May 2006 Location: Tustin, CA Posts: 7,391 Toan iTrader: 5 / 100%	sorry bro, i haven't installed mine yet so i can't help ya... thought someone else would of seen it by now. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/lighting/13214-diy-install-guide-oem-fogs.html
Posted By	For	Type	Date
ClickProtect	This thread	Refback	02-25-2008 05:51 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	02-19-2008 11:29 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	02-11-2008 05:20 AM
Lighting [Archive] - 8th Generation Honda Civic Forum	This thread	Refback	02-06-2008 02:45 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	01-21-2008 11:41 PM
DIY/install index - LOOK HERE BEFORE ASKING FOR A DIY - 8th Generation Honda Civic Forum	This thread	Refback	01-19-2008 11:59 PM
DIY: Install guide for OEM fogs... - Page 7 - 8th Generation Honda Civic Forum	This thread	Refback	01-16-2008 08:27 PM
DIY/install index - LOOK HERE BEFORE ASKING FOR A DIY - 8th Generation Honda Civic Forum	This thread	Refback	01-01-2008 08:48 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	12-12-2007 06:18 PM
Fog lights install - Page 6 - 8th Generation Honda Civic Forum	This thread	Refback	12-09-2007 05:22 PM
8th Generation Honda Civic Forum	This thread	Refback	12-06-2007 11:54 AM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
XenonDepot HID Install Guide	unplugged	Lighting, H.I.D.'s, & Neon	79	02-04-2010 04:23 PM
DIY: Injen CAI install on R18 (lots of pics)	peliROJO	Engine	120	02-03-2010 02:27 AM
HID xenondepot install guide	webby	Lighting	59	01-28-2010 03:44 PM
2006 Civic Rear Speaker Install Guide	webby	Audio	22	08-28-2009 06:57 PM
DIY install of new head unit in sedan UK/AUS	aussiebuddha	I.C.E., Electrical, Security, & Navigation	4	04-04-2006 03:30 PM

11-26-2007, 08:12 PM	#201 (permalink)
maicivic Junior Member Join Date: Oct 2007 Posts: 9 iTrader: 0 / 0%	im planning to buy the fog lights from colleghills but i think its too overpriced, any suggestions? are those jdm fog lights from ebay any good? any seller that you guys can recommend. i have the lx 4dr

12-02-2007, 06:54 PM	#204 (permalink)
Mookie469 Senior Member Join Date: Oct 2006 Location: Williamsburg, VA Posts: 558 Ed iTrader: 2 / 100%	Hey man thanks for th DIY, it was really easy to follow, even if you dont have paper instructions.... Thanks once again.

12-06-2007, 11:13 AM	#205 (permalink)
campingkevin Junior Member Join Date: Aug 2007 Posts: 16 iTrader: 0 / 0%	the fog switch.. I got VSA there.. where can I place the fog switch now..?

12-06-2007, 11:40 AM	#206 (permalink)
yoshiod9 Senior Member Join Date: Nov 2007 Location: bay area Age: 26 Posts: 281 iTrader: 1 / 100%	this is the honda dealership i used when i lived up in sacramento. their internet prices are usually pretty decent (the fogs are on sale for $216.48 for all models except '08 Si's [like mine...dammit] when i checked today 12/6/2007) and they almost always have installation diagrams on the site. hth anyone looking for fogs. Honda Civic Exterior Accessories- 2006 - 2007

12-17-2007, 09:34 PM	#208 (permalink)
jackolee Senior Member Join Date: Jun 2007 Location: Tennessee Age: 20 Posts: 12,763 iTrader: 3 / 100%	1. I cant see what it looks like 2. It connects to the fuse box thing under the sterring wheel.(i might be mixing that up with one) 3. If you look under the steering wheel theres another brown plug under there 4. The switch will goes next to the VSA and if you dont have a place to put it go to honda and get one of those plastic things that holds 3 of those plugs 5. I cant see that .... but just zip tie that down somewhere 6.ground it somewhere under the steering wheel theres a metal bolt that you can connect it to.

12-17-2007, 11:38 PM	#209 (permalink)
tda1337 Senior Member Join Date: Oct 2007 Location: Waterbury, CT Posts: 1,642 Rick iTrader: 0 / 0%	psst, if u have VSA u need to get the steering wheel light stick/column with fog controls on it otherwise u will loose your power window function

12-17-2007, 11:39 PM	#210 (permalink)
tda1337 Senior Member Join Date: Oct 2007 Location: Waterbury, CT Posts: 1,642 Rick iTrader: 0 / 0%	*mirror not window sorry its late at night

12-23-2007, 05:35 PM	#211 (permalink)
gui Senior Member Join Date: Oct 2007 Location: Orlando, FL Posts: 213 Gui Rodrigues iTrader: 3 / 100%	HELP... I just bought the exact same 20-mini fuses that are already on the fuse box but I cant get it to fit into the #6 hole. It goes in about halfway and then is stuck, no matter how much force I use...

12-23-2007, 06:12 PM	#216 (permalink)
gui Senior Member Join Date: Oct 2007 Location: Orlando, FL Posts: 213 Gui Rodrigues iTrader: 3 / 100%	kit didnt come with the fuse for some reason, but i bought a pack of em at ace hardware and they are exactly the same ones that are already used for the rest of the fuse box. is there a simple trick i am missing or something? are the prongs too long and need to be shortened or something?

12-23-2007, 06:21 PM	#218 (permalink)
gui Senior Member Join Date: Oct 2007 Location: Orlando, FL Posts: 213 Gui Rodrigues iTrader: 3 / 100%	bingo, thats what it is... the fuse looks the same, but the prongs are too long on mine.. now i gotta go out and gvet some more

12-23-2007, 07:16 PM	#220 (permalink)
gui Senior Member Join Date: Oct 2007 Location: Orlando, FL Posts: 213 Gui Rodrigues iTrader: 3 / 100%	i did already leave and go to three different stores and not find any.. what spares are you talking about?